%
(99)
(Automatic test)
(T0 D=2. CR=0. - ZMIN=0. - water jet)
N10 G90
N11 G71
(-Attention- Property Safe Retracts is set to Clearance Height.)
(Ensure the clearance height will clear the part and or fixtures.)
(Raise the Z-axis to a safe height before starting the program.)

(Contour waterjet)
N12 M03
N13 G54
N14 G00 X-7.738 Y10.5
N15 M10 Q64
N16 G01 Y9.5 F1
N17 G03 X-6.738 Y8.5 I1. J0.
N18 G02 X14.238 Y-8.5 I10.488 J-8.5 F0
N19 G02 X-6.738 I-10.488 J8.5
N20 G01 X-16.25
N21 G02 X-17.25 Y-7.5 I0. J1.
N22 G01 Y7.5
N23 G02 X-16.25 Y8.5 I1. J0.
N24 G01 X-6.738
N25 G03 X-6.885 Y9.907 I-0.777 J0.63 F1
N26 G01 X-7.662 Y10.536
N27 M11
N28 M05
N29 M30