//GENERIC 3-AXIS POST PROCESSOR FOR V1.1 PROMAX CNCS.
//SINGLE HEAD CONFIGURATION
//T1 D=12.7 CR=0. - ZMIN=-29.21 - FLAT END MILL
//T2 D=5.08 CR=2.54 - ZMIN=-31.75 - BALL END MILL
//T3 D=50.8 CR=0. - ZMIN=0. - FACE MILL
G90 G60 G65 G40 G44 G17
G21
//-ATTENTION- PROPERTY SAFE RETRACTS IS SET TO CLEARANCE HEIGHT.
//ENSURE THE CLEARANCE HEIGHT WILL CLEAR THE PART AND OR FIXTURES.
//RAISE THE Z-AXIS TO A SAFE HEIGHT BEFORE STARTING THE PROGRAM.

//FACE1
G44
EXD.WRITE_TOOLPAR 3 0 50.800
EXD.WRITE_TOOLPAR 3 1 50.800
H1 T3
G43 X0 K1 Z-
S5000
G17 G90
G0 X160.02 Y-62.941
Z15.24
G0 Z5.08
G18 G2 X154.94 Z0. I-5.08 K0. F1016.
G1 X127.
X-127.
G17 G2 Y-24.765 I0. J19.088
G1 X127.
G3 Y13.411 I0. J19.088
G1 X-127.
G2 Y51.587 I0. J19.088
G1 X127.
G18 G3 X132.08 Z5.08 I0. K5.08
G0 Z15.24

//ADAPTIVE1
G44
EXD.WRITE_TOOLPAR 1 0 12.700
EXD.WRITE_TOOLPAR 1 1 25.400
H1 T1
G43 X0 K1 Z-
S5000
G17 G90
G0 X-35.544 Y6.187
Z20.32
G0 Z10.16
Z3.81
G1 Z2.54 F508.
G3 X-36.072 Y-5.866 Z1.878 I-0.264 J-6.027
X-35.544 Y6.187 Z1.216 I0.264 J6.027
X-36.072 Y-5.866 Z0.555 I-0.264 J-6.027
X-35.544 Y6.187 Z-0.107 I0.264 J6.027
X-36.072 Y-5.866 Z-0.769 I-0.264 J-6.027
X-35.544 Y6.187 Z-1.431 I0.264 J6.027
X-36.072 Y-5.866 Z-2.093 I-0.264 J-6.027
X-35.544 Y6.187 Z-2.754 I0.264 J6.027
X-36.072 Y-5.866 Z-3.416 I-0.264 J-6.027
X-35.544 Y6.187 Z-4.078 I0.264 J6.027
X-36.072 Y-5.866 Z-4.74 I-0.264 J-6.027
X-29.776 Y0.161 Z-5.08 I0.264 J6.027
X-41.841 I-6.033 J0.
X-29.776 I6.033 J0.
G1 X-29.76 Y1.514 F1016.
X-29.752 Y1.598
X-29.742 Y1.75
X-29.743 Y1.903
X-29.751 Y2.055
X-29.767 Y2.207
X-29.79 Y2.357
X-29.819 Y2.507
X-29.854 Y2.655
X-29.895 Y2.802
X-29.94 Y2.947
X-29.991 Y3.091
X-30.047 Y3.234
X-30.109 Y3.379
X-30.177 Y3.526
X-30.253 Y3.674
X-30.334 Y3.823
X-30.422 Y3.973
X-30.517 Y4.122
X-30.619 Y4.271
X-30.727 Y4.418
X-30.841 Y4.565
X-30.961 Y4.709
X-31.088 Y4.852
X-31.221 Y4.991
X-31.36 Y5.128
X-31.505 Y5.262
X-31.655 Y5.392
X-31.81 Y5.518
X-31.971 Y5.64
X-32.137 Y5.758
X-32.308 Y5.87

!!! BLOCKS SKIPPED HERE !!!
!!! PROGRAM IS ONLY FOR REVIEW !!!


//CONTOUR1
G44
EXD.WRITE_TOOLPAR 2 0 5.080
EXD.WRITE_TOOLPAR 2 1 25.400
H1 T2
G43 X0 K1 Z-
S5000
G17 G90
G0 X-89.748 Y-1.455
Z15.24
G0 Z0.758
G1 Z-0.508 F508.
X-89.74 Z-0.596
X-89.717 Y-1.454 Z-0.682
X-89.68 Z-0.762
X-89.629 Y-1.453 Z-0.835
X-89.566 Y-1.452 Z-0.897
X-89.494 Y-1.45 Z-0.948
X-89.414 Y-1.449 Z-0.985
X-89.328 Y-1.447 Z-1.008
X-89.24 Y-1.445 Z-1.016
G3 X-88.741 Y-0.928 I-0.009 J0.508
G1 X-88.748 Y-0.569 F1016.
Y-0.406
Y0.406
Y0.569
X-88.73 Y1.543
X-88.726 Y1.706
X-88.69 Y2.68
X-88.682 Y2.843
X-88.628 Y3.817
X-88.617 Y3.98
X-88.544 Y4.954
X-88.53 Y5.117
X-88.454 Y5.929
X-88.438 Y6.091
X-88.329 Y7.066
X-88.31 Y7.228
X-88.183 Y8.203
X-88.16 Y8.365
X-88.014 Y9.34
X-87.987 Y9.502
X-87.85 Y10.315
X-87.822 Y10.477
X-87.638 Y11.452
X-87.607 Y11.614
X-87.405 Y12.589
X-87.369 Y12.751
X-87.184 Y13.563
X-87.147 Y13.726
X-86.907 Y14.7
X-86.865 Y14.863
X-86.606 Y15.837
X-86.56 Y16.
X-86.306 Y16.887
X-86.28 Y16.974
X-85.981 Y17.949
X-85.928 Y18.111
X-85.656 Y18.944

!!! BLOCKS SKIPPED HERE !!!
!!! PROGRAM IS ONLY FOR REVIEW !!!


//HORIZONTAL1
G44
EXD.WRITE_TOOLPAR 1 0 12.700
EXD.WRITE_TOOLPAR 1 1 25.400
H1 T1
G43 X0 K1 Z-
S5000
G17 G90
G0 X-36.263 Y7.177
Z15.24
G0 Z-26.891
G1 X-36.265 Y7.178 Z-26.96 F508.
X-36.269 Y7.182 Z-27.03
X-36.276 Y7.188 Z-27.099
X-36.287 Y7.197 Z-27.167
X-36.3 Y7.208 Z-27.235
X-36.316 Y7.221 Z-27.301
X-36.334 Y7.236 Z-27.367
X-36.356 Y7.254 Z-27.43
X-36.38 Y7.274 Z-27.493
X-36.407 Y7.295 Z-27.553
X-36.437 Y7.319 Z-27.611
X-36.47 Y7.344 Z-27.668
X-36.505 Y7.371 Z-27.722
X-36.542 Y7.399 Z-27.773
X-36.582 Y7.429 Z-27.822
X-36.624 Y7.46 Z-27.868
X-36.669 Y7.492 Z-27.911
X-36.715 Y7.524 Z-27.951
X-36.764 Y7.558 Z-27.987
X-36.815 Y7.592 Z-28.021
X-36.867 Y7.627 Z-28.051
X-36.922 Y7.661 Z-28.078
X-36.977 Y7.696 Z-28.101
X-37.034 Y7.731 Z-28.12
X-37.092 Y7.766 Z-28.136
X-37.152 Y7.801 Z-28.148
X-37.212 Y7.835 Z-28.156
X-37.273 Y7.869 Z-28.16
G3 X-43.045 Y-2.726 Z-28.822 I-2.886 J-5.297
X-34.281 Y1.214 Z-29.21 I2.886 J5.297
G1 X-33.764 Y3.454 F1016.
G3 X-36.32 Y4.527 I-1.371 J0.316
X-37.43 Y1.892 I7.162 J-4.567
X-37.584 Y-0.963 I7.97 J-1.862
X-34.817 Y-1.109 I1.396 J0.171
G1 X-34.281 Y1.214
G2 X-29.308 Y5.902 I6.002 J-1.386
G3 X-24.336 Y10.589 I-1.029 J6.073
G1 X-23.926 Y12.364
G3 X-26.826 Y16.01 I-2.9 J0.669
X-43.837 Y3.744 I0. J-17.929
X-34.589 Y-15.08 I14.175 J-4.719
X-29.631 Y-12.346 I1.254 J3.589
G1 X-24.336 Y10.589
G2 X-19.555 Y17.037 I9.785 J-2.259
G3 X-21.737 Y24.762 I-2.062 J3.588
X-30.814 Y24.302 I6.02 J-208.881
X-44.82 Y18.633 I1.777 J-24.526

!!! BLOCKS SKIPPED HERE !!!
!!! PROGRAM IS ONLY FOR REVIEW !!!