/**
Copyright (C) 2012-2026 by Autodesk, Inc.
All rights reserved.
Siemens SINUMERIK 840D post processor configuration.
$Revision: 44214 1f74fb3c348cc93e66ee15e354e2015b2aaf19e6 $
$Date: 2026-02-17 04:16:48 $
FORKID {75AF44EA-0A42-4803-8DE7-43BF08B352B3}
*/
description = "Siemens SINUMERIK 840D";
// >>>>> INCLUDED FROM ../common/siemens-840d common.cps
if (!description) {
description = "Siemens SINUMERIK Mill";
}
vendor = "Siemens";
vendorUrl = "http://www.siemens.com";
legal = "Copyright (C) 2012-2026 by Autodesk, Inc.";
certificationLevel = 2;
minimumRevision = 45917;
if (!longDescription) {
longDescription = subst("Generic post for %1. Note that the post will use D1 always for the tool length compensation as this is how most users work.", description);
}
extension = "mpf";
setCodePage("ascii");
capabilities = CAPABILITY_MILLING | CAPABILITY_MACHINE_SIMULATION;
tolerance = spatial(0.002, MM);
if (typeof revision == "number" && typeof supportedFeatures != "undefined") {
supportedFeatures |= revision >= 50328 ? FEATURE_MACHINE_ROTARY_ANGLES : 0;
}
minimumChordLength = spatial(0.25, MM);
minimumCircularRadius = spatial(0.01, MM);
maximumCircularRadius = spatial(1000, MM);
minimumCircularSweep = toRad(0.01);
var useArcTurn = false;
maximumCircularSweep = toRad(useArcTurn ? (999 * 360) : 90); // max revolutions
allowHelicalMoves = true;
allowedCircularPlanes = undefined; // allow any circular motion
highFeedrate = (unit == MM) ? 5000 : 200;
probeMultipleFeatures = true;
// user-defined properties
properties = {
preloadTool: {
title : "Preload tool",
description: "Preloads the next tool at a tool change (if any).",
group : "preferences",
type : "boolean",
value : true,
scope : "post"
},
showSequenceNumbers: {
title : "Use sequence numbers",
description: "'Yes' outputs sequence numbers on each block, 'Only on tool change' outputs sequence numbers on tool change blocks only, and 'No' disables the output of sequence numbers.",
group : "formats",
type : "enum",
values : [
{title:"Yes", id:"true"},
{title:"No", id:"false"},
{title:"Only on tool change", id:"toolChange"}
],
value: "true",
scope: "post"
},
sequenceNumberStart: {
title : "Start sequence number",
description: "The number at which to start the sequence numbers.",
group : "formats",
type : "integer",
value : 10,
scope : "post"
},
sequenceNumberIncrement: {
title : "Sequence number increment",
description: "The amount by which the sequence number is incremented by in each block.",
group : "formats",
type : "integer",
value : 1,
scope : "post"
},
optionalStop: {
title : "Optional stop",
description: "Outputs optional stop code during when necessary in the code.",
group : "preferences",
type : "boolean",
value : true,
scope : "post"
},
useTiltedWorkplane: {
title : "Use CYCLE800",
description: "Specifies that the tilted working plane feature (CYCLE800) should be used.",
group : "multiAxis",
type : "boolean",
value : true,
scope : "post"
},
useShortestDirection: {
title : "Use shortest direction",
description: "Specifies that the shortest angular direction should be used.",
group : "multiAxis",
type : "boolean",
value : true,
scope : "post"
},
showNotes: {
title : "Show notes",
description: "Writes operation notes as comments in the outputted code.",
group : "formats",
type : "boolean",
value : false,
scope : "post"
},
useIncreasedDecimals: {
title : "Use increased decimal output",
description: "Increases the number of decimals to 5 for MM /6 for IN for the output of linear axes and to 6 for rotary axes.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
},
useGrouping: {
title : "Group operations",
description: "Groups toolpath moves together to condense code until expanded at the controller.",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
},
useCIP: {
title : "Use CIP",
description: "Enable to use the CIP command.",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
},
useSmoothing: {
title : "Use CYCLE832",
description: "Enable to use CYCLE832.",
group : "preferences",
type : "enum",
values : [
{title:"Off", id:"-1"},
{title:"Automatic", id:"9999"},
{title:"Level 1", id:"1"},
{title:"Level 2", id:"2"},
{title:"Level 3", id:"3"}
],
value: "-1",
scope: "post"
},
toolAsName: {
title : "Tool as name",
description: "If enabled, the tool will be called with the tool description rather than the tool number.",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
},
cycle800Mode: {
title : "CYCLE800 mode",
description: "Specifies the mode to use for CYCLE800.",
group : "multiAxis",
type : "enum",
values : [
{id:"39", title:"39 (CAB)"},
{id:"27", title:"27 (CBA)"},
{id:"57", title:"57 (ABC)"},
{id:"45", title:"45 (ACB)"},
{id:"30", title:"30 (BCA)"},
{id:"54", title:"54 (BAC)"},
{id:"192", title:"192 (Rotary angles)"}
],
value: "27",
scope: "post"
},
cycle800SwivelDataRecord: {
title : "CYCLE800 Swivel Data Record",
description: "Specifies the label to use for the Swivel Data Record for CYCLE800.",
group : "multiAxis",
type : "string",
value : "",
scope : "post"
},
cycle800RetractMethod: {
title : "CYCLE800 Retract Method",
description: "Retract Mode parameter for CYCLE800",
group : "multiAxis",
type : "enum",
values : [
{id:"0", title:"0 - no retraction"},
{id:"1", title:"1 - retract in machine Z"},
{id:"2", title:"2 - retract in machine Z, then XY"}
],
value: "1",
scope: "post"
},
useExtendedCycles: {
title : "Extended cycles",
description: "Specifies whether the extended cycles should be used. Controls before 2011 should set this to false.",
group : "preferences",
type : "boolean",
value : true,
scope : "post"
},
useTOFFR: {
title : "TOFFR Output",
description: "Enables outputting TOFFR for Wear and Inverse Wear compensation type.",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
},
singleLineProbing: {
title : "Single line probing",
description: "If enabled, probing will be output in a single cycle call line.",
group : "probing",
type : "boolean",
value : false,
scope : "post"
},
safePositionMethod: {
title : "Safe Retracts",
description: "Select your desired retract option. 'Clearance Height' retracts to the operation clearance height." +
"'SUPA with HOME variables' will output _XHOME, _YHOME and _ZHOME variables for retracts.",
group : "homePositions",
type : "enum",
values: [
{title:"G53", id:"G53"},
{title:"Clearance Height", id:"clearanceHeight"},
{title:"SUPA", id:"SUPA"},
{title:"SUPA with HOME variables", id:"SUPAVariables"}
],
value: "SUPA",
scope: "post"
},
useParkPosition: {
title : "Home XY at end",
description: "Specifies that the machine moves to the home position in XY at the end of the program.",
group : "homePositions",
type : "boolean",
value : false,
scope : "post"
}
};
// wcs definiton
wcsDefinitions = {
useZeroOffset: false,
wcs : [
{name:"Standard", format:"G", range:[54, 57]},
{name:"Extended", format:"G", range:[505, 599]}
]
};
var gFormat = createFormat({prefix:"G", decimals:0});
var mFormat = createFormat({prefix:"M", decimals:0});
var hFormat = createFormat({prefix:"H", decimals:0});
var dFormat = createFormat({prefix:"D", decimals:0});
var nFormat = createFormat({prefix:"N", decimals:0});
var xyzFormat = createFormat({decimals:(unit == MM ? 3 : 4)});
var abcFormat = createFormat({decimals:3, scale:DEG});
var abcDirectFormat = createFormat({decimals:3, scale:DEG, prefix:"=DC(", suffix:")"});
var abc3Format = createFormat({decimals:6});
var feedFormat = createFormat({decimals:(unit == MM ? 1 : 2)});
var inverseTimeFormat = createFormat({decimals:3, type:FORMAT_REAL});
var toolFormat = createFormat({decimals:0});
var toolProbeFormat = createFormat({decimals:0, minDigitsLeft:3});
var rpmFormat = createFormat({decimals:0});
var secFormat = createFormat({decimals:3});
var taperFormat = createFormat({decimals:1, scale:DEG});
var arFormat = createFormat({decimals:3, scale:DEG});
var integerFormat = createFormat({decimals:0});
var motionOutputTolerance = 0.0001;
var xOutput = createOutputVariable({onchange:function() {state.retractedX = false;}, prefix:"X", tolerance:motionOutputTolerance}, xyzFormat);
var yOutput = createOutputVariable({onchange:function() {state.retractedY = false;}, prefix:"Y", tolerance:motionOutputTolerance}, xyzFormat);
var zOutput = createOutputVariable({onchange:function() {state.retractedZ = false;}, prefix:"Z", tolerance:motionOutputTolerance}, xyzFormat);
var toolVectorOutputI = createOutputVariable({prefix:"A3=", control:CONTROL_FORCE}, abc3Format);
var toolVectorOutputJ = createOutputVariable({prefix:"B3=", control:CONTROL_FORCE}, abc3Format);
var toolVectorOutputK = createOutputVariable({prefix:"C3=", control:CONTROL_FORCE}, abc3Format);
var aOutput = createOutputVariable({prefix:"A", tolerance:motionOutputTolerance}, abcFormat);
var bOutput = createOutputVariable({prefix:"B", tolerance:motionOutputTolerance}, abcFormat);
var cOutput = createOutputVariable({prefix:"C", tolerance:motionOutputTolerance}, abcFormat);
var feedOutput = createOutputVariable({prefix:"F"}, feedFormat);
var inverseTimeOutput = createOutputVariable({prefix:"F", control:CONTROL_FORCE}, inverseTimeFormat);
var sOutput = createOutputVariable({prefix:"S", control:CONTROL_FORCE}, rpmFormat);
var dOutput = createOutputVariable({}, dFormat);
// circular output
var iOutput = createOutputVariable({prefix:"I", control:CONTROL_FORCE}, xyzFormat);
var jOutput = createOutputVariable({prefix:"J", control:CONTROL_FORCE}, xyzFormat);
var kOutput = createOutputVariable({prefix:"K", control:CONTROL_FORCE}, xyzFormat);
var gMotionModal = createOutputVariable({control:CONTROL_FORCE}, gFormat); // modal group 1 // G0-G3, ...
var gPlaneModal = createOutputVariable({onchange:function () {gMotionModal.reset();}}, gFormat); // modal group 2 // G17-19
var gAbsIncModal = createOutputVariable({}, gFormat); // modal group 3 // G90-91
var gFeedModeModal = createOutputVariable({}, gFormat); // modal group 5 // G94-95
var gUnitModal = createOutputVariable({}, gFormat); // modal group 6 // G70-71
var fourthAxisClamp = createOutputVariable({}, mFormat);
var fifthAxisClamp = createOutputVariable({}, mFormat);
var settings = {
coolant: {
// samples:
// {id: COOLANT_THROUGH_TOOL, on: 88, off: 89}
// {id: COOLANT_THROUGH_TOOL, on: [8, 88], off: [9, 89]}
// {id: COOLANT_THROUGH_TOOL, on: "M88 P3 (myComment)", off: "M89"}
coolants: [
{id:COOLANT_FLOOD, on:8},
{id:COOLANT_MIST},
{id:COOLANT_THROUGH_TOOL},
{id:COOLANT_AIR},
{id:COOLANT_AIR_THROUGH_TOOL},
{id:COOLANT_SUCTION},
{id:COOLANT_FLOOD_MIST},
{id:COOLANT_FLOOD_THROUGH_TOOL},
{id:COOLANT_OFF, off:9}
],
singleLineCoolant: false, // specifies to output multiple coolant codes in one line rather than in separate lines
},
smoothing: {
roughing : 3, // roughing level for smoothing in automatic mode
semi : 2, // semi-roughing level for smoothing in automatic mode
semifinishing : 2, // semi-finishing level for smoothing in automatic mode
finishing : 1, // finishing level for smoothing in automatic mode
thresholdRoughing : toPreciseUnit(0.2, MM), // operations with stock/tolerance above that threshold will use roughing level in automatic mode
thresholdFinishing : toPreciseUnit(0.05, MM), // operations with stock/tolerance below that threshold will use finishing level in automatic mode
thresholdSemiFinishing: toPreciseUnit(0.1, MM), // operations with stock/tolerance above finishing and below threshold roughing that threshold will use semi finishing level in automatic mode
differenceCriteria: "both", // options: "level", "tolerance", "both". Specifies criteria when output smoothing codes
autoLevelCriteria : "stock", // use "stock" or "tolerance" to determine levels in automatic mode
cancelCompensation: false // tool length compensation must be canceled prior to changing the smoothing level
},
retract: {
methodXY : undefined, // special condition, overwrite retract behavior per axis
methodZ : undefined, // special condition, overwrite retract behavior per axis
useZeroValues: ["G28", "G30"], // enter property value id(s) for using "0" value instead of machineConfiguration axes home position values (ie G30 Z0)
homeXY : {onIndexing:false, onToolChange:false, onProgramEnd:{axes:[X, Y]}} // Specifies when the machine should be homed in X/Y. Sample: onIndexing:{axes:[X, Y], singleLine:false}
},
parametricFeeds: {
firstFeedParameter : 1, // specifies the initial parameter number to be used for parametric feedrate output
feedAssignmentVariable: "_R", // specifies the syntax to define a parameter
feedOutputVariable : "F=_R" // specifies the syntax to output the feedrate as parameter
},
machineAngles: { // refer to https://cam.autodesk.com/posts/reference/classMachineConfiguration.html#a14bcc7550639c482492b4ad05b1580c8
controllingAxis: ABC,
type : PREFER_PREFERENCE,
options : ENABLE_ALL
},
workPlaneMethod: {
useTiltedWorkplane : true, // specifies that tilted workplanes should be used (ie. G68.2, G254, PLANE SPATIAL, CYCLE800), can be overwritten by property
eulerConvention : undefined, // specifies the euler convention (ie EULER_XYZ_R), set to undefined to use machine angles for TWP commands ('undefined' requires machine configuration)
eulerCalculationMethod: "standard", // ('standard' / 'machine') 'machine' adjusts euler angles to match the machines ABC orientation, machine configuration required
cancelTiltFirst : false, // cancel tilted workplane prior to WCS (G54-G59) blocks
forceMultiAxisIndexing: false, // force multi-axis indexing for 3D programs
optimizeType : OPTIMIZE_AXIS // can be set to OPTIMIZE_NONE, OPTIMIZE_BOTH, OPTIMIZE_TABLES, OPTIMIZE_HEADS, OPTIMIZE_AXIS. 'undefined' uses legacy rotations
},
subprograms: {
initialSubprogramNumber: 1, // specifies the initial number to be used for subprograms. 'undefined' uses the main program number
minimumCyclePoints : 5, // minimum number of points in cycle operation to consider for subprogram
format : undefined, // the format to use for the subprogam number format
// objects below also accept strings with "%currentSubprogram" as placeholder. Sample: {files:["%"], embedded:"N" + "%currentSubprogram"}
files : {extension:"spf", prefix:"SUB" + "%currentSubprogram"}, // specifies the subprogram file extension and the prefix to use for the generated file
startBlock : {files:"; %_N_" + "SUB" + "%currentSubprogram" + "_SPF", embedded:"LABEL" + "%currentSubprogram" + ":"}, // specifies the start syntax of a subprogram followed by the subprogram number
endBlock : {files:mFormat.format(17), embedded:"LABEL0:"}, // specifies the command to for the end of a subprogram
callBlock : {files:"SUB" + "%currentSubprogram" + "; SPF CALL", embedded:"CALL BLOCK LABEL" + "%currentSubprogram" + " TO LABEL0"} // specifies the command for calling a subprogram followed by the subprogram number
},
comments: {
permittedCommentChars: undefined, // letters are not case sensitive, use option 'outputFormat' below. Set to 'undefined' to allow any character
prefix : "; ", // specifies the prefix for the comment
suffix : "", // specifies the suffix for the comment
outputFormat : "ignoreCase", // can be set to "upperCase", "lowerCase" and "ignoreCase". Set to "ignoreCase" to write comments without upper/lower case formatting
maximumLineLength : 80 // the maximum number of characters allowed in a line, set to 0 to disable comment output
},
probing: {
allowIndexingWCSProbing: false // specifies that probe WCS with tool orientation is supported
},
maximumSequenceNumber : undefined, // the maximum sequence number (Nxxx), use 'undefined' for unlimited
outputToolLengthCompensation: false, // specifies if tool length compensation code should be output (G43)
polarCycleExpandMode : 0 // 0=EXPAND_NONE: Does not expand any cycles. 1=EXPAND_TCP: Expands drilling cycles, when TCP is on. 2=EXPAND_NON_TCP: Expands drilling cycles, when TCP is off. 3=EXPAND_ALL: Expands all drilling cycles
};
// collected state
var cycleSeparator = ", ";
var toolLengthOffset = 0;
function onOpen() {
// define and enable machine configuration
receivedMachineConfiguration = machineConfiguration.isReceived();
if (typeof defineMachine == "function") {
defineMachine(); // hardcoded machine configuration
}
// define axis formats, should be done prior to activating the machine configuration
formatOutputVariables();
activateMachine(); // enable the machine optimizations and settings
if (receivedMachineConfiguration && machineConfiguration.isMultiAxisConfiguration()) {
if (machineConfiguration.getMultiAxisFeedrateMode() == FEED_DPM) {
error(localize("Degrees per minute feedrates are not supported by the controller."));
}
}
var cycle800Config = getCycle800Config(new Vector(0, 0, 0)); // get the Euler method to use for cycle800
settings.workPlaneMethod.eulerConvention = cycle800Config[0] != 192 ? cycle800Config[2] : undefined;
if (!machineConfiguration.isMultiAxisConfiguration() && !tcp.isSupportedByMachine) {
tcp.isSupportedByMachine = true; // default to true when no machine configuration is defined
}
writeln("; %_N_" + translateText(String(programName).toUpperCase(), " ", "_") + "_MPF");
writeComment(programComment);
writeProgramHeader();
writeParametricFeedVariables();
writeSUPAVariables(); // writes SUPA variables if safe position method is SUPAVariables
if (typeof inspectionWriteVariables == "function") {
inspectionWriteVariables();
}
writeWCS(getSection(0), true);
// absolute coordinates and feed per min
writeBlock(gPlaneModal.format(17), gUnitModal.format(unit == MM ? 710 : 700), gAbsIncModal.format(90), gFeedModeModal.format(94));
writeWorkPiece();
writeBlock(gFormat.format(64)); // continuous-path mode
validateCommonParameters();
}
function formatOutputVariables() {
if (getProperty("useIncreasedDecimals")) {
xyzFormat.setNumberOfDecimals(unit == MM ? 5 : 6);
abcFormat.setNumberOfDecimals(6);
abcDirectFormat.setNumberOfDecimals(6);
abc3Format.setNumberOfDecimals(8);
xOutput.setFormat(xyzFormat);
yOutput.setFormat(xyzFormat);
zOutput.setFormat(xyzFormat);
aOutput.setFormat(abcFormat);
bOutput.setFormat(abcFormat);
cOutput.setFormat(abcFormat);
toolVectorOutputI.setFormat(abc3Format);
toolVectorOutputJ.setFormat(abc3Format);
toolVectorOutputK.setFormat(abc3Format);
iOutput.setFormat(xyzFormat);
jOutput.setFormat(xyzFormat);
kOutput.setFormat(xyzFormat);
}
if (getProperty("useShortestDirection")) {
var outputFormats = [aOutput, bOutput, cOutput];
// abcFormat and abcDirectFormat must be compatible except for =DC()
for (var i = 0; i < outputFormats.length; i++) {
if (machineConfiguration.isMachineCoordinate(i)) {
if (machineConfiguration.getAxisByCoordinate(i).isCyclic() || isSameDirection(machineConfiguration.getAxisByCoordinate(i).getAxis(), machineConfiguration.getSpindleAxis())) {
outputFormats[i].setFormat(abcDirectFormat);
}
}
}
}
}
function writeParametricFeedVariables() {
if (getProperty("useParametricFeed")) {
var firstFeedParameter = settings.parametricFeeds.firstFeedParameter;
var feedParameterDefinitions = [];
for (var i = firstFeedParameter; i <= (firstFeedParameter + 10); ++i) {
feedParameterDefinitions.push(settings.parametricFeeds.feedAssignmentVariable + i);
}
writeBlock("DEF REAL", feedParameterDefinitions.join());
}
}
function writeSUPAVariables() {
if (getProperty("safePositionMethod") == "SUPAVariables") {
var method = getProperty("safePositionMethod", "undefined");
var useZeroValues = (settings.retract.useZeroValues && settings.retract.useZeroValues.indexOf(method) != -1);
var _xHome = machineConfiguration.hasHomePositionX() && !useZeroValues ? machineConfiguration.getHomePositionX() : toPreciseUnit(0, MM);
var _yHome = machineConfiguration.hasHomePositionY() && !useZeroValues ? machineConfiguration.getHomePositionY() : toPreciseUnit(0, MM);
var _zHome = machineConfiguration.getRetractPlane() != 0 && !useZeroValues ? machineConfiguration.getRetractPlane() : toPreciseUnit(0, MM);
writeBlock("DEF REAL _ZHOME, _XHOME, _YHOME");
writeBlock("_ZHOME = " + _zHome);
writeBlock("_XHOME = " + _xHome);
writeBlock("_YHOME = " + _yHome);
}
}
function setSmoothing(mode) {
smoothingSettings = settings.smoothing;
if (mode == smoothing.isActive && (!mode || !smoothing.isDifferent) && !smoothing.force) {
return; // return if smoothing is already active or is not different
}
if (mode) { // enable smoothing
if (true) { // set to false when you want to use the alternative version for CYCLE832 output 'CYCLE832(0.01, 1, 1)'
writeBlock("CYCLE832(" + xyzFormat.format(smoothing.tolerance) + ", 11200" + smoothing.level + ")");
} else {
writeBlock("CYCLE832(" + xyzFormat.format(smoothing.tolerance) + ", " + smoothing.level + ", 1)");
}
} else { // disable smoothing
writeBlock("CYCLE832()");
}
smoothing.isActive = mode;
smoothing.force = false;
smoothing.isDifferent = false;
}
function setTCP(_tcp, force) {
if (!force) {
if (!tcp.isSupportedByMachine || state.tcpIsActive == _tcp) {
return;
}
}
var tcpCode = _tcp ? "TRAORI" : "TRAFOOF";
state.tcpIsActive = _tcp;
writeBlock(tcpCode);
machineSimulation({}); // update machine simulation TCP state
}
function onSection() {
var forceSectionRestart = optionalSection && !currentSection.isOptional();
optionalSection = currentSection.isOptional();
var insertToolCall = isToolChangeNeeded(getProperty("toolAsName") ? "description" : "number") || forceSectionRestart;
var newWorkOffset = isNewWorkOffset() || forceSectionRestart;
var newWorkPlane = isNewWorkPlane() || forceSectionRestart || (typeof defineWorkPlane == "function" &&
Vector.diff(defineWorkPlane(getPreviousSection(), false), defineWorkPlane(currentSection, false)).length > 1e-4);
initializeSmoothing(); // initialize smoothing mode
if (insertToolCall || newWorkOffset || newWorkPlane) {
setCoolant(COOLANT_OFF);
if (insertToolCall && !isFirstSection() && getPreviousSection().getTool().getType() != TOOL_PROBE) {
onCommand(COMMAND_STOP_SPINDLE);
}
writeRetract(Z); // retract
if (newWorkPlane && settings.workPlaneMethod.useTiltedWorkplane) {
cancelWorkPlane(isFirstSection() && !is3D());
}
}
writeln("");
var comment = formatComment(getParameter("operation-comment", "")).replace(settings.comments.prefix, "");
writeln(comment ? "MSG (" + "\"" + comment + "\"" + ")" : "");
if (getProperty("showNotes")) {
writeSectionNotes();
}
// tool change
writeToolCall(tool, insertToolCall);
smoothing.force = insertToolCall && (getProperty("useSmoothing") != "-1");
setSmoothing(smoothing.isAllowed); // writes the required smoothing codes
if (insertToolCall && tool.type == TOOL_PROBE) {
writeBlock("SPOS=0");
}
startSpindle(tool, insertToolCall);
// write parametric feedrate table
if (typeof initializeParametricFeeds == "function") {
initializeParametricFeeds(insertToolCall);
}
// Output modal commands here
writeBlock(gPlaneModal.format(17), gAbsIncModal.format(90), gFeedModeModal.format(94));
// wcs
if (insertToolCall) { // force work offset when changing tool
currentWorkOffset = undefined;
}
writeWCS(currentSection, true);
forceXYZ();
var abc = defineWorkPlane(currentSection, !machineConfiguration.isHeadConfiguration());
if (currentSection.isMultiAxis() && !tcp.isSupportedByOperation) {
var text = "FGROUP(X, Y, Z";
if (machineConfiguration.getAxisU().isEnabled()) {
text += ", " + axisDesignators[machineConfiguration.getAxisU().getCoordinate()];
}
if (machineConfiguration.getAxisV().isEnabled()) {
text += ", " + axisDesignators[machineConfiguration.getAxisV().getCoordinate()];
}
writeBlock(text + ")");
}
// prepositioning
var initialPosition = getFramePosition(currentSection.getInitialPosition());
var isRequired = insertToolCall || state.retractedZ || (!isFirstSection() && getPreviousSection().isMultiAxis());
writeInitialPositioning(initialPosition, isRequired);
if (getProperty("useGrouping")) {
writeBlock("GROUP_BEGIN(0, " + "\"" + comment + "\"" + ", 0, 0)");
}
setCoolant(tool.coolant);
if (insertToolCall) {
gPlaneModal.reset();
}
if (typeof inspectionProcessSectionStart == "function") {
inspectionProcessSectionStart();
}
if (subprogramsAreSupported()) {
subprogramDefine(initialPosition, abc); // define subprogram
}
}
function onDwell(seconds) {
if (seconds > 0) {
writeBlock(gFormat.format(4), "F" + secFormat.format(seconds));
}
}
function onSpindleSpeed(spindleSpeed) {
writeBlock(sOutput.format(spindleSpeed));
}
function onOrientateSpindle(angle) {
onCommand(COMMAND_STOP_SPINDLE);
writeBlock("SPOS=" + abcFormat.format(angle));
}
function onCycle() {
writeBlock(gPlaneModal.format(17));
}
function onCyclePoint(x, y, z) {
if (isInspectionOperation()) {
if (typeof inspectionCycleInspect == "function") {
inspectionCycleInspect(cycle, x, y, z);
} else {
cycleNotSupported();
}
} else if (isProbeOperation()) {
writeProbeCycle(cycle, x, y, z);
} else {
writeDrillCycle(cycle, x, y, z);
}
}
function onCycleEnd() {
if (isProbeOperation()) {
zOutput.reset();
gMotionModal.reset();
writeBlock(gMotionModal.format(1), zOutput.format(cycle.retract), feedOutput.format(cycle.feedrate));
} else {
if (subprogramsAreSupported() && subprogramState.cycleSubprogramIsActive) {
subprogramEnd();
}
if (!cycleExpanded && !isInspectionOperation()) {
writeBlock("MCALL"); // end modal cycle
}
}
writeWCS(currentSection, true);
if (getProperty("useLiveConnection") && isProbeOperation() && typeof liveConnectionWriteData == "function") {
liveConnectionWriteData("macroEnd");
}
zOutput.reset();
}
function onLinear5D(_x, _y, _z, _a, _b, _c, feed, feedMode) {
if (pendingRadiusCompensation >= 0) {
error(localize("Radius compensation cannot be activated/deactivated for 5-axis move."));
}
if (!currentSection.isOptimizedForMachine()) {
forceXYZ();
}
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
var a = currentSection.isOptimizedForMachine() ? aOutput.format(_a) : toolVectorOutputI.format(_a);
var b = currentSection.isOptimizedForMachine() ? bOutput.format(_b) : toolVectorOutputJ.format(_b);
var c = currentSection.isOptimizedForMachine() ? cOutput.format(_c) : toolVectorOutputK.format(_c);
if (feedMode == FEED_INVERSE_TIME) {
forceFeed();
}
var f = feedMode == FEED_INVERSE_TIME ? inverseTimeOutput.format(feed) : getFeed(feed);
var fMode = feedMode == FEED_INVERSE_TIME ? 93 : 94;
// define the rotary radii if non-TCP machine
if (feedMode == FEED_FPM && !tcp.isSupportedByOperation) {
setRotaryRadii(getCurrentPosition(), new Vector(_x, _y, _z), getCurrentDirection(), new Vector(_a, _b, _c));
}
if (x || y || z || a || b || c) {
writeBlock(gFeedModeModal.format(fMode), gMotionModal.format(1), x, y, z, a, b, c, f);
} else if (f) {
if (getNextRecord().isMotion()) { // try not to output feed without motion
forceFeed(); // force feed on next line
} else {
writeBlock(gFeedModeModal.format(fMode), gMotionModal.format(1), f);
}
}
}
var mapCommand = {
COMMAND_END : 30,
COMMAND_STOP_SPINDLE : 5,
COMMAND_ORIENTATE_SPINDLE: 19
};
function onCommand(command) {
switch (command) {
case COMMAND_COOLANT_OFF:
setCoolant(COOLANT_OFF);
return;
case COMMAND_COOLANT_ON:
setCoolant(tool.coolant);
return;
case COMMAND_STOP:
writeBlock(mFormat.format(0));
forceSpindleSpeed = true;
forceCoolant = true;
return;
case COMMAND_OPTIONAL_STOP:
writeBlock(mFormat.format(1));
forceSpindleSpeed = true;
forceCoolant = true;
return;
case COMMAND_START_SPINDLE:
forceSpindleSpeed = false;
writeBlock(sOutput.format(spindleSpeed), mFormat.format(tool.clockwise ? 3 : 4));
return;
case COMMAND_LOAD_TOOL:
toolLengthOffset = 1; // optional, use tool.lengthOffset instead
writeToolBlock("T" + (getProperty("toolAsName") ? "=" + "\"" + (tool.description.toUpperCase()) + "\"" : toolFormat.format(tool.number)));
writeBlock(mFormat.format(6));
dOutput.reset();
writeBlock(dOutput.format(toolLengthOffset));
writeComment(tool.comment);
var preloadTool = getProperty("toolAsName") ? getNextTool(tool.description != getFirstTool().description, "description") : getNextTool(tool.number != getFirstTool().number);
if (getProperty("preloadTool") && preloadTool) {
if (getProperty("toolAsName")) {
writeBlock("T=" + "\"" + preloadTool.description.toUpperCase() + "\"");
} else {
writeBlock("T" + toolFormat.format(preloadTool.number));
}
}
return;
case COMMAND_LOCK_MULTI_AXIS:
if (machineConfiguration.isMultiAxisConfiguration()) {
// writeBlock(fourthAxisClamp.format(25)); // lock 4th axis
if (machineConfiguration.getNumberOfAxes() > 4) {
// writeBlock(fifthAxisClamp.format(35)); // lock 5th axis
}
}
return;
case COMMAND_UNLOCK_MULTI_AXIS:
if (machineConfiguration.isMultiAxisConfiguration()) {
// writeBlock(fourthAxisClamp.format(26)); // unlock 4th axis
if (machineConfiguration.getNumberOfAxes() > 4) {
// writeBlock(fifthAxisClamp.format(36)); // unlock 5th axis
}
}
return;
case COMMAND_START_CHIP_TRANSPORT:
return;
case COMMAND_STOP_CHIP_TRANSPORT:
return;
case COMMAND_BREAK_CONTROL:
return;
case COMMAND_TOOL_MEASURE:
return;
case COMMAND_PROBE_ON:
return;
case COMMAND_PROBE_OFF:
return;
case COMMAND_LIVE_ALIGNMENT:
return;
}
var stringId = getCommandStringId(command);
var mcode = mapCommand[stringId];
if (mcode != undefined) {
writeBlock(mFormat.format(mcode));
} else {
onUnsupportedCommand(command);
}
}
function onSectionEnd() {
if (state.tcpIsActive) {
setTCP(false);
forceWorkPlane();
} else {
if (currentSection.isMultiAxis()) {
writeBlock("FGROUP()");
}
}
writeBlock(gFeedModeModal.format(94)); // inverse time feed off
if (!isLastSection()) {
if (getNextSection().getTool().coolant != tool.coolant) {
setCoolant(COOLANT_OFF);
}
if (tool.breakControl && isToolChangeNeeded(getNextSection(), getProperty("toolAsName") ? "description" : "number")) {
onCommand(COMMAND_BREAK_CONTROL);
}
}
if (subprogramsAreSupported()) {
subprogramEnd();
}
if (getProperty("useGrouping")) {
writeBlock("GROUP_END(0, 0)");
}
if (typeof inspectionProcessSectionEnd == "function") {
inspectionProcessSectionEnd();
}
forceAny();
}
function onClose() {
optionalSection = false;
writeln("");
setCoolant(COOLANT_OFF);
onCommand(COMMAND_STOP_SPINDLE);
writeRetract(Z);
setWorkPlane(new Vector(0, 0, 0)); // reset working plane
cancelWorkPlane(true);
if (getProperty("useParkPosition")) {
if (getSetting("retract.homeXY.onProgramEnd", false)) {
writeRetract(settings.retract.homeXY.onProgramEnd);
}
}
if (typeof inspectionProcessSectionEnd == "function") {
inspectionProcessSectionEnd();
}
writeBlock(mFormat.format(30)); // stop program, spindle stop, coolant off
if (subprogramsAreSupported()) {
writeSubprograms();
}
}
// >>>>> INCLUDED FROM include_files/commonFunctions.cpi
// internal variables, do not change
var receivedMachineConfiguration;
var tcp = {isSupportedByControl:getSetting("supportsTCP", true), isSupportedByMachine:false, isSupportedByOperation:false};
var state = {
retractedX : false, // specifies that the machine has been retracted in X
retractedY : false, // specifies that the machine has been retracted in Y
retractedZ : false, // specifies that the machine has been retracted in Z
tcpIsActive : false, // specifies that TCP is currently active
twpIsActive : false, // specifies that TWP is currently active
lengthCompensationActive: !getSetting("outputToolLengthCompensation", true), // specifies that tool length compensation is active
mainState : true // specifies the current context of the state (true = main, false = optional)
};
var validateLengthCompensation = getSetting("outputToolLengthCompensation", true); // disable validation when outputToolLengthCompensation is disabled
var multiAxisFeedrate;
var sequenceNumber;
var optionalSection = false;
var currentWorkOffset;
var forceSpindleSpeed = false;
var operationNeedsSafeStart = false; // used to convert blocks to optional for safeStartAllOperations
function activateMachine() {
// disable unsupported rotary axes output
if (!machineConfiguration.isMachineCoordinate(0) && (typeof aOutput != "undefined")) {
aOutput.disable();
}
if (!machineConfiguration.isMachineCoordinate(1) && (typeof bOutput != "undefined")) {
bOutput.disable();
}
if (!machineConfiguration.isMachineCoordinate(2) && (typeof cOutput != "undefined")) {
cOutput.disable();
}
// setup usage of useTiltedWorkplane
settings.workPlaneMethod.useTiltedWorkplane = getProperty("useTiltedWorkplane") != undefined ? getProperty("useTiltedWorkplane") :
getSetting("workPlaneMethod.useTiltedWorkplane", false);
settings.workPlaneMethod.useABCPrepositioning = getSetting("workPlaneMethod.useABCPrepositioning", true);
if (!machineConfiguration.isMultiAxisConfiguration()) {
return; // don't need to modify any settings for 3-axis machines
}
// identify if any of the rotary axes has TCP enabled
var axes = [machineConfiguration.getAxisU(), machineConfiguration.getAxisV(), machineConfiguration.getAxisW()];
tcp.isSupportedByMachine = axes.some(function(axis) {return axis.isEnabled() && axis.isTCPEnabled();}); // true if TCP is enabled on any rotary axis
if (tcp.isSupportedByMachine) {
bufferRotaryMoves = false; // disable bufferRotaryMoves if TCP is enabled on any rotary axis
}
// save multi-axis feedrate settings from machine configuration
var mode = machineConfiguration.getMultiAxisFeedrateMode();
var type = mode == FEED_INVERSE_TIME ? machineConfiguration.getMultiAxisFeedrateInverseTimeUnits() :
(mode == FEED_DPM ? machineConfiguration.getMultiAxisFeedrateDPMType() : DPM_STANDARD);
multiAxisFeedrate = {
mode : mode,
maximum : machineConfiguration.getMultiAxisFeedrateMaximum(),
type : type,
tolerance: mode == FEED_DPM ? machineConfiguration.getMultiAxisFeedrateOutputTolerance() : 0,
bpwRatio : mode == FEED_DPM ? machineConfiguration.getMultiAxisFeedrateBpwRatio() : 1
};
// setup of retract/reconfigure TAG: Only needed until post kernel supports these machine config settings
if (receivedMachineConfiguration && machineConfiguration.performRewinds()) {
safeRetractDistance = machineConfiguration.getSafeRetractDistance();
safePlungeFeed = machineConfiguration.getSafePlungeFeedrate();
safeRetractFeed = machineConfiguration.getSafeRetractFeedrate();
}
if (typeof safeRetractDistance == "number" && getProperty("safeRetractDistance") != undefined && getProperty("safeRetractDistance") != 0) {
safeRetractDistance = getProperty("safeRetractDistance");
}
if (revision >= 50294) {
activateAutoPolarMode({tolerance:tolerance / 2, optimizeType:OPTIMIZE_AXIS, expandCycles:getSetting("polarCycleExpandMode", EXPAND_ALL)});
}
if (machineConfiguration.isHeadConfiguration() && getSetting("workPlaneMethod.compensateToolLength", false)) {
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (section.isMultiAxis()) {
machineConfiguration.setToolLength(getBodyLength(section.getTool())); // define the tool length for head adjustments
section.optimizeMachineAnglesByMachine(machineConfiguration, OPTIMIZE_AXIS);
}
}
} else {
optimizeMachineAngles2(OPTIMIZE_AXIS);
}
}
function getBodyLength(tool) {
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (tool.number == section.getTool().number) {
if (section.hasParameter("operation:tool_assemblyGaugeLength")) { // For Fusion
return section.getParameter("operation:tool_assemblyGaugeLength", tool.bodyLength + tool.holderLength);
} else { // Legacy products
return section.getParameter("operation:tool_overallLength", tool.bodyLength + tool.holderLength);
}
}
}
return tool.bodyLength + tool.holderLength;
}
function getFeed(f) {
if (getProperty("useG95")) {
return feedOutput.format(f / spindleSpeed); // use feed value
}
if (typeof activeMovements != "undefined" && activeMovements) {
var feedContext = activeMovements[movement];
if (feedContext != undefined) {
if (!feedFormat.areDifferent(feedContext.feed, f)) {
if (feedContext.id == currentFeedId) {
return ""; // nothing has changed
}
forceFeed();
currentFeedId = feedContext.id;
return settings.parametricFeeds.feedOutputVariable + (settings.parametricFeeds.firstFeedParameter + feedContext.id);
}
}
currentFeedId = undefined; // force parametric feed next time
}
return feedOutput.format(f); // use feed value
}
function validateCommonParameters() {
validateToolData();
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (getSection(0).workOffset == 0 && section.workOffset > 0) {
if (!(typeof wcsDefinitions != "undefined" && wcsDefinitions.useZeroOffset)) {
error(localize("Using multiple work offsets is not possible if the initial work offset is 0."));
}
}
if (section.isMultiAxis()) {
if (!section.isOptimizedForMachine() &&
(!getSetting("workPlaneMethod.useTiltedWorkplane", false) || !getSetting("supportsToolVectorOutput", false))) {
error(localize("This postprocessor requires a machine configuration for 5-axis simultaneous toolpath."));
}
if (machineConfiguration.getMultiAxisFeedrateMode() == FEED_INVERSE_TIME && !getSetting("supportsInverseTimeFeed", true)) {
error(localize("This postprocessor does not support inverse time feedrates."));
}
if (getSetting("supportsToolVectorOutput", false) && !tcp.isSupportedByControl) {
error(localize("Incompatible postprocessor settings detected." + EOL +
"Setting 'supportsToolVectorOutput' requires setting 'supportsTCP' to be enabled as well."));
}
}
}
if (!tcp.isSupportedByControl && tcp.isSupportedByMachine) {
error(localize("The machine configuration has TCP enabled which is not supported by this postprocessor."));
}
if (getProperty("safePositionMethod") == "clearanceHeight") {
var msg = "-Attention- Property 'Safe Retracts' is set to 'Clearance Height'." + EOL +
"Ensure the clearance height will clear the part and or fixtures." + EOL +
"Raise the Z-axis to a safe height before starting the program.";
warning(msg);
writeComment(msg);
}
}
function validateToolData() {
var _default = 99999;
var _maximumSpindleRPM = machineConfiguration.getMaximumSpindleSpeed() > 0 ? machineConfiguration.getMaximumSpindleSpeed() :
settings.maximumSpindleRPM == undefined ? _default : settings.maximumSpindleRPM;
var _maximumToolNumber = machineConfiguration.isReceived() && machineConfiguration.getNumberOfTools() > 0 ? machineConfiguration.getNumberOfTools() :
settings.maximumToolNumber == undefined ? _default : settings.maximumToolNumber;
var _maximumToolLengthOffset = settings.maximumToolLengthOffset == undefined ? _default : settings.maximumToolLengthOffset;
var _maximumToolDiameterOffset = settings.maximumToolDiameterOffset == undefined ? _default : settings.maximumToolDiameterOffset;
var header = ["Detected maximum values are out of range.", "Maximum values:"];
var warnings = {
toolNumber : {msg:"Tool number value exceeds the maximum value for tool: " + EOL, max:" Tool number: " + _maximumToolNumber, values:[]},
lengthOffset : {msg:"Tool length offset value exceeds the maximum value for tool: " + EOL, max:" Tool length offset: " + _maximumToolLengthOffset, values:[]},
diameterOffset: {msg:"Tool diameter offset value exceeds the maximum value for tool: " + EOL, max:" Tool diameter offset: " + _maximumToolDiameterOffset, values:[]},
spindleSpeed : {msg:"Spindle speed exceeds the maximum value for operation: " + EOL, max:" Spindle speed: " + _maximumSpindleRPM, values:[]}
};
var toolIds = [];
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (toolIds.indexOf(section.getTool().getToolId()) === -1) { // loops only through sections which have a different tool ID
var toolNumber = section.getTool().number;
var lengthOffset = section.getTool().lengthOffset;
var diameterOffset = section.getTool().diameterOffset;
var comment = section.getParameter("operation-comment", "");
if (toolNumber > _maximumToolNumber && !getProperty("toolAsName")) {
warnings.toolNumber.values.push(SP + toolNumber + EOL);
}
if (lengthOffset > _maximumToolLengthOffset) {
warnings.lengthOffset.values.push(SP + "Tool " + toolNumber + " (" + comment + "," + " Length offset: " + lengthOffset + ")" + EOL);
}
if (diameterOffset > _maximumToolDiameterOffset) {
warnings.diameterOffset.values.push(SP + "Tool " + toolNumber + " (" + comment + "," + " Diameter offset: " + diameterOffset + ")" + EOL);
}
toolIds.push(section.getTool().getToolId());
}
// loop through all sections regardless of tool id for idenitfying spindle speeds
// identify if movement ramp is used in current toolpath, use ramp spindle speed for comparisons
var ramp = section.getMovements() & ((1 << MOVEMENT_RAMP) | (1 << MOVEMENT_RAMP_ZIG_ZAG) | (1 << MOVEMENT_RAMP_PROFILE) | (1 << MOVEMENT_RAMP_HELIX));
var _sectionSpindleSpeed = Math.max(section.getTool().spindleRPM, ramp ? section.getTool().rampingSpindleRPM : 0, 0);
if (_sectionSpindleSpeed > _maximumSpindleRPM) {
warnings.spindleSpeed.values.push(SP + section.getParameter("operation-comment", "") + " (" + _sectionSpindleSpeed + " RPM" + ")" + EOL);
}
}
// sort lists by tool number
warnings.toolNumber.values.sort(function(a, b) {return a - b;});
warnings.lengthOffset.values.sort(function(a, b) {return a.localeCompare(b);});
warnings.diameterOffset.values.sort(function(a, b) {return a.localeCompare(b);});
var warningMessages = [];
for (var key in warnings) {
if (warnings[key].values != "") {
header.push(warnings[key].max); // add affected max values to the header
warningMessages.push(warnings[key].msg + warnings[key].values.join(""));
}
}
if (warningMessages.length != 0) {
warningMessages.unshift(header.join(EOL) + EOL);
warning(warningMessages.join(EOL));
}
}
function forceFeed() {
currentFeedId = undefined;
feedOutput.reset();
}
/** Force output of X, Y, and Z. */
function forceXYZ() {
xOutput.reset();
yOutput.reset();
zOutput.reset();
}
/** Force output of A, B, and C. */
function forceABC() {
aOutput.reset();
bOutput.reset();
cOutput.reset();
}
/** Force output of X, Y, Z, A, B, C, and F on next output. */
function forceAny() {
forceXYZ();
forceABC();
forceFeed();
}
/**
Writes the specified block.
*/
function writeBlock() {
var text = formatWords(arguments);
if (!text) {
return;
}
var prefix = getSetting("sequenceNumberPrefix", "N");
var suffix = getSetting("writeBlockSuffix", "");
if ((optionalSection || skipBlocks) && !getSetting("supportsOptionalBlocks", true)) {
error(localize("Optional blocks are not supported by this post."));
}
if (getProperty("showSequenceNumbers") == "true") {
if (sequenceNumber == undefined || sequenceNumber >= settings.maximumSequenceNumber) {
sequenceNumber = getProperty("sequenceNumberStart");
}
if (optionalSection || skipBlocks) {
writeWords2("/", prefix + sequenceNumber, text + suffix);
} else {
writeWords2(prefix + sequenceNumber, text + suffix);
}
sequenceNumber += getProperty("sequenceNumberIncrement");
} else {
if (optionalSection || skipBlocks) {
writeWords2("/", text + suffix);
} else {
writeWords(text + suffix);
}
}
}
validate(settings.comments, "Setting 'comments' is required but not defined.");
function formatComment(text) {
var prefix = settings.comments.prefix;
var suffix = settings.comments.suffix;
var _permittedCommentChars = settings.comments.permittedCommentChars == undefined ? "" : settings.comments.permittedCommentChars;
switch (settings.comments.outputFormat) {
case "upperCase":
text = text.toUpperCase();
_permittedCommentChars = _permittedCommentChars.toUpperCase();
break;
case "lowerCase":
text = text.toLowerCase();
_permittedCommentChars = _permittedCommentChars.toLowerCase();
break;
case "ignoreCase":
_permittedCommentChars = _permittedCommentChars.toUpperCase() + _permittedCommentChars.toLowerCase();
break;
default:
error(localize("Unsupported option specified for setting 'comments.outputFormat'."));
}
if (_permittedCommentChars != "") {
text = filterText(String(text), _permittedCommentChars);
}
text = String(text).substring(0, settings.comments.maximumLineLength - prefix.length - suffix.length);
return text != "" ? prefix + text + suffix : "";
}
/**
Output a comment.
*/
function writeComment(text) {
if (!text) {
return;
}
var comments = String(text).split(/\r?\n/);
for (comment in comments) {
var _comment = formatComment(comments[comment]);
if (_comment) {
if (getSetting("comments.showSequenceNumbers", false)) {
writeBlock(_comment);
} else {
writeln(_comment);
}
}
}
}
function onComment(text) {
writeComment(text);
}
/**
Writes the specified block - used for tool changes only.
*/
function writeToolBlock() {
var show = getProperty("showSequenceNumbers");
setProperty("showSequenceNumbers", (show == "true" || show == "toolChange") ? "true" : "false");
writeBlock(arguments);
setProperty("showSequenceNumbers", show);
machineSimulation({/*x:toPreciseUnit(200, MM), y:toPreciseUnit(200, MM), coordinates:MACHINE,*/ mode:TOOLCHANGE}); // move machineSimulation to a tool change position
}
var skipBlocks = false;
var initialState = JSON.parse(JSON.stringify(state)); // save initial state
var optionalState = JSON.parse(JSON.stringify(state));
var saveCurrentSectionId = undefined;
function writeStartBlocks(isRequired, code) {
var saveSkipBlocks = skipBlocks;
var saveMainState = state; // save main state
if (!isRequired) {
if (!getProperty("safeStartAllOperations", false)) {
return; // when safeStartAllOperations is disabled, dont output code and return
}
if (saveCurrentSectionId != getCurrentSectionId()) {
saveCurrentSectionId = getCurrentSectionId();
forceModals(); // force all modal variables when entering a new section
optionalState = Object.create(initialState); // reset optionalState to initialState when entering a new section
}
skipBlocks = true; // if values are not required, but safeStartAllOperations is enabled - write following blocks as optional
state = optionalState; // set state to optionalState if skipBlocks is true
state.mainState = false;
}
code(); // writes out the code which is passed to this function as an argument
state = saveMainState; // restore main state
skipBlocks = saveSkipBlocks; // restore skipBlocks value
}
var pendingRadiusCompensation = -1;
function onRadiusCompensation() {
pendingRadiusCompensation = radiusCompensation;
if (pendingRadiusCompensation >= 0 && !getSetting("supportsRadiusCompensation", true)) {
error(localize("Radius compensation mode is not supported."));
return;
}
}
function onPassThrough(text) {
var commands = String(text).split(",");
for (text in commands) {
writeBlock(commands[text]);
}
}
function forceModals() {
if (arguments.length == 0) { // reset all modal variables listed below
var modals = [
"gMotionModal",
"gPlaneModal",
"gAbsIncModal",
"gFeedModeModal",
"feedOutput"
];
if (operationNeedsSafeStart && (typeof currentSection != "undefined" && currentSection.isMultiAxis())) {
modals.push("fourthAxisClamp", "fifthAxisClamp", "sixthAxisClamp");
}
for (var i = 0; i < modals.length; ++i) {
if (typeof this[modals[i]] != "undefined") {
this[modals[i]].reset();
}
}
} else {
for (var i in arguments) {
arguments[i].reset(); // only reset the modal variable passed to this function
}
}
}
/** Helper function to be able to use a default value for settings which do not exist. */
function getSetting(setting, defaultValue) {
var result = defaultValue;
var keys = setting.split(".");
var obj = settings;
for (var i in keys) {
if (obj[keys[i]] != undefined) { // setting does exist
result = obj[keys[i]];
if (typeof [keys[i]] === "object") {
obj = obj[keys[i]];
continue;
}
} else { // setting does not exist, use default value
if (defaultValue != undefined) {
result = defaultValue;
} else {
error("Setting '" + keys[i] + "' has no default value and/or does not exist.");
return undefined;
}
}
}
return result;
}
function getForwardDirection(_section) {
var forward = undefined;
var _optimizeType = settings.workPlaneMethod && settings.workPlaneMethod.optimizeType;
if (_section.isMultiAxis()) {
forward = _section.workPlane.forward;
} else if (!getSetting("workPlaneMethod.useTiltedWorkplane", false) && machineConfiguration.isMultiAxisConfiguration()) {
if (_optimizeType == undefined) {
var saveRotation = getRotation();
getWorkPlaneMachineABC(_section, true);
forward = getRotation().forward;
setRotation(saveRotation); // reset rotation
} else {
var abc = getWorkPlaneMachineABC(_section, false);
var forceAdjustment = settings.workPlaneMethod.optimizeType == OPTIMIZE_TABLES || settings.workPlaneMethod.optimizeType == OPTIMIZE_BOTH;
forward = machineConfiguration.getOptimizedDirection(_section.workPlane.forward, abc, false, forceAdjustment);
}
} else {
forward = getRotation().forward;
}
return forward;
}
function getRetractParameters() {
var _arguments = typeof arguments[0] === "object" ? arguments[0].axes : arguments;
var singleLine = arguments[0].singleLine == undefined ? true : arguments[0].singleLine;
var words = []; // store all retracted axes in an array
var retractAxes = new Array(false, false, false);
var method = getProperty("safePositionMethod", "undefined");
if (method == "clearanceHeight") {
if (!is3D()) {
error(localize("Safe retract option 'Clearance Height' is only supported when all operations are along the setup Z-axis."));
}
return undefined;
}
validate(settings.retract, "Setting 'retract' is required but not defined.");
validate(_arguments.length != 0, "No axis specified for getRetractParameters().");
for (i in _arguments) {
retractAxes[_arguments[i]] = true;
}
if ((retractAxes[0] || retractAxes[1]) && !state.retractedZ) { // retract Z first before moving to X/Y home
error(localize("Retracting in X/Y is not possible without being retracted in Z."));
return undefined;
}
// special conditions
if (retractAxes[0] || retractAxes[1]) {
method = getSetting("retract.methodXY", method);
}
if (retractAxes[2]) {
method = getSetting("retract.methodZ", method);
}
// define home positions
var useZeroValues = (settings.retract.useZeroValues && settings.retract.useZeroValues.indexOf(method) != -1);
var _xHome = machineConfiguration.hasHomePositionX() && !useZeroValues ? machineConfiguration.getHomePositionX() : toPreciseUnit(0, MM);
var _yHome = machineConfiguration.hasHomePositionY() && !useZeroValues ? machineConfiguration.getHomePositionY() : toPreciseUnit(0, MM);
var _zHome = machineConfiguration.getRetractPlane() != 0 && !useZeroValues ? machineConfiguration.getRetractPlane() : toPreciseUnit(0, MM);
for (var i = 0; i < _arguments.length; ++i) {
switch (_arguments[i]) {
case X:
if (!state.retractedX) {
words.push("X" + xyzFormat.format(_xHome));
xOutput.reset();
state.retractedX = true;
}
break;
case Y:
if (!state.retractedY) {
words.push("Y" + xyzFormat.format(_yHome));
yOutput.reset();
state.retractedY = true;
}
break;
case Z:
if (!state.retractedZ) {
words.push("Z" + xyzFormat.format(_zHome));
zOutput.reset();
state.retractedZ = true;
}
break;
default:
error(localize("Unsupported axis specified for getRetractParameters()."));
return undefined;
}
}
return {
method : method,
retractAxes: retractAxes,
words : words,
positions : {
x: retractAxes[0] ? _xHome : undefined,
y: retractAxes[1] ? _yHome : undefined,
z: retractAxes[2] ? _zHome : undefined},
singleLine: singleLine};
}
/** Returns true when subprogram logic does exist into the post. */
function subprogramsAreSupported() {
return typeof subprogramState != "undefined";
}
// Start of machine simulation connection move support
var debugSimulation = false; // enable to output debug information for connection move support in the NC program
var TCPON = "TCP ON";
var TCPOFF = "TCP OFF";
var TWPON = "TWP ON";
var TWPOFF = "TWP OFF";
var TOOLCHANGE = "TOOL CHANGE";
var RETRACTTOOLAXIS = "RETRACT TOOLAXIS";
var WORK = "WORK CS";
var MACHINE = "MACHINE CS";
var MIN = "MIN";
var MAX = "MAX";
var WARNING_NON_RANGE = [0, 1, 2];
var isTwpOn;
var isTcpOn;
/**
* Helper function for connection moves in machine simulation.
* @param {Object} parameters An object containing the desired options for machine simulation.
* @note Available properties are:
* @param {Number} x X axis position, alternatively use MIN or MAX to move to the axis limit
* @param {Number} y Y axis position, alternatively use MIN or MAX to move to the axis limit
* @param {Number} z Z axis position, alternatively use MIN or MAX to move to the axis limit
* @param {Number} a A axis position (in radians)
* @param {Number} b B axis position (in radians)
* @param {Number} c C axis position (in radians)
* @param {Number} feed desired feedrate, automatically set to high/current feedrate if not specified
* @param {String} mode mode TCPON | TCPOFF | TWPON | TWPOFF | TOOLCHANGE | RETRACTTOOLAXIS
* @param {String} coordinates WORK | MACHINE - if undefined, work coordinates will be used by default
* @param {Number} eulerAngles the calculated Euler angles for the workplane
* @example
machineSimulation({a:abc.x, b:abc.y, c:abc.z, coordinates:MACHINE});
machineSimulation({x:toPreciseUnit(200, MM), y:toPreciseUnit(200, MM), coordinates:MACHINE, mode:TOOLCHANGE});
*/
function machineSimulation(parameters) {
if (revision < 50198 || skipBlocks || (getSimulationStreamPath() == "" && !debugSimulation)) {
return; // return when post kernel revision is lower than 50198 or when skipBlocks is enabled
}
getAxisLimit = function(axis, limit) {
validate(limit == MIN || limit == MAX, subst(localize("Invalid argument \"%1\" passed to the machineSimulation function."), limit));
var range = axis.getRange();
if (range.isNonRange()) {
var axisLetters = ["X", "Y", "Z"];
var warningMessage = subst(localize("An attempt was made to move the \"%1\" axis to its MIN/MAX limits during machine simulation, but its range is set to \"unlimited\"." + EOL +
"A limited range must be set for the \"%1\" axis in the machine definition, or these motions will not be shown in machine simulation."), axisLetters[axis.getCoordinate()]);
warningOnce(warningMessage, WARNING_NON_RANGE[axis.getCoordinate()]);
return undefined;
}
return limit == MIN ? range.minimum : range.maximum;
};
var x = (isNaN(parameters.x) && parameters.x) ? getAxisLimit(machineConfiguration.getAxisX(), parameters.x) : parameters.x;
var y = (isNaN(parameters.y) && parameters.y) ? getAxisLimit(machineConfiguration.getAxisY(), parameters.y) : parameters.y;
var z = (isNaN(parameters.z) && parameters.z) ? getAxisLimit(machineConfiguration.getAxisZ(), parameters.z) : parameters.z;
var rotaryAxesErrorMessage = localize("Invalid argument for rotary axes passed to the machineSimulation function. Only numerical values are supported.");
var a = (isNaN(parameters.a) && parameters.a) ? error(rotaryAxesErrorMessage) : parameters.a;
var b = (isNaN(parameters.b) && parameters.b) ? error(rotaryAxesErrorMessage) : parameters.b;
var c = (isNaN(parameters.c) && parameters.c) ? error(rotaryAxesErrorMessage) : parameters.c;
var coordinates = parameters.coordinates;
var eulerAngles = parameters.eulerAngles;
var feed = parameters.feed;
if (feed === undefined && typeof gMotionModal !== "undefined") {
feed = gMotionModal.getCurrent() !== 0;
}
var mode = parameters.mode;
var performToolChange = mode == TOOLCHANGE;
if (mode !== undefined && ![TCPON, TCPOFF, TWPON, TWPOFF, TOOLCHANGE, RETRACTTOOLAXIS].includes(mode)) {
error(subst("Mode '%1' is not supported.", mode));
}
// mode takes precedence over TCP/TWP states
var enableTCP = isTcpOn;
var enableTWP = isTwpOn;
if (mode === TCPON || mode === TCPOFF) {
enableTCP = mode === TCPON;
} else if (mode === TWPON || mode === TWPOFF) {
enableTWP = mode === TWPON;
} else {
enableTCP = typeof state !== "undefined" && state.tcpIsActive;
enableTWP = typeof state !== "undefined" && state.twpIsActive;
}
var disableTCP = !enableTCP;
var disableTWP = !enableTWP;
if (disableTWP) {
simulation.setTWPModeOff();
isTwpOn = false;
}
if (disableTCP) {
simulation.setTCPModeOff();
isTcpOn = false;
}
if (enableTCP) {
simulation.setTCPModeOn();
isTcpOn = true;
}
if (enableTWP) {
if (settings.workPlaneMethod.eulerConvention == undefined) {
simulation.setTWPModeAlignToCurrentPose();
} else if (eulerAngles) {
simulation.setTWPModeByEulerAngles(settings.workPlaneMethod.eulerConvention, eulerAngles.x, eulerAngles.y, eulerAngles.z);
}
isTwpOn = true;
}
if (mode == RETRACTTOOLAXIS) {
simulation.retractAlongToolAxisToLimit();
}
if (debugSimulation) {
writeln(" DEBUG" + JSON.stringify(parameters));
writeln(" DEBUG" + JSON.stringify({isTwpOn:isTwpOn, isTcpOn:isTcpOn, feed:feed}));
}
if (x !== undefined || y !== undefined || z !== undefined || a !== undefined || b !== undefined || c !== undefined) {
if (x !== undefined) {simulation.setTargetX(x);}
if (y !== undefined) {simulation.setTargetY(y);}
if (z !== undefined) {simulation.setTargetZ(z);}
if (a !== undefined) {simulation.setTargetA(a);}
if (b !== undefined) {simulation.setTargetB(b);}
if (c !== undefined) {simulation.setTargetC(c);}
if (feed != undefined && feed) {
simulation.setMotionToLinear();
simulation.setFeedrate(typeof feed == "number" ? feed : feedOutput.getCurrent() == 0 ? highFeedrate : feedOutput.getCurrent());
} else {
simulation.setMotionToRapid();
}
if (coordinates != undefined && coordinates == MACHINE) {
simulation.moveToTargetInMachineCoords();
} else {
simulation.moveToTargetInWorkCoords();
}
}
if (performToolChange) {
simulation.performToolChangeCycle();
simulation.moveToTargetInMachineCoords();
}
}
// <<<<< INCLUDED FROM include_files/commonFunctions.cpi
// >>>>> INCLUDED FROM include_files/defineMachine.cpi
function defineMachine() {
var useTCP = true;
if (false) { // note: setup your machine here
var aAxis = createAxis({coordinate:0, table:true, axis:[1, 0, 0], range:[-120, 120], preference:1, tcp:useTCP});
var cAxis = createAxis({coordinate:2, table:true, axis:[0, 0, 1], range:[-360, 360], preference:0, tcp:useTCP});
machineConfiguration = new MachineConfiguration(aAxis, cAxis);
setMachineConfiguration(machineConfiguration);
if (receivedMachineConfiguration) {
warning(localize("The provided CAM machine configuration is overwritten by the postprocessor."));
receivedMachineConfiguration = false; // CAM provided machine configuration is overwritten
}
}
if (!receivedMachineConfiguration) {
// multiaxis settings
if (machineConfiguration.isHeadConfiguration()) {
machineConfiguration.setVirtualTooltip(false); // translate the pivot point to the virtual tool tip for nonTCP rotary heads
}
// retract / reconfigure
var performRewinds = false; // set to true to enable the rewind/reconfigure logic
if (performRewinds) {
machineConfiguration.enableMachineRewinds(); // enables the retract/reconfigure logic
safeRetractDistance = (unit == IN) ? 1 : 25; // additional distance to retract out of stock, can be overridden with a property
safeRetractFeed = (unit == IN) ? 20 : 500; // retract feed rate
safePlungeFeed = (unit == IN) ? 10 : 250; // plunge feed rate
machineConfiguration.setSafeRetractDistance(safeRetractDistance);
machineConfiguration.setSafeRetractFeedrate(safeRetractFeed);
machineConfiguration.setSafePlungeFeedrate(safePlungeFeed);
var stockExpansion = new Vector(toPreciseUnit(0.1, IN), toPreciseUnit(0.1, IN), toPreciseUnit(0.1, IN)); // expand stock XYZ values
machineConfiguration.setRewindStockExpansion(stockExpansion);
}
// multi-axis feedrates
if (machineConfiguration.isMultiAxisConfiguration()) {
machineConfiguration.setMultiAxisFeedrate(
useTCP ? FEED_FPM : getProperty("useDPMFeeds") ? FEED_DPM : FEED_INVERSE_TIME,
9999.99, // maximum output value for inverse time feed rates
getProperty("useDPMFeeds") ? DPM_COMBINATION : INVERSE_MINUTES, // INVERSE_MINUTES/INVERSE_SECONDS or DPM_COMBINATION/DPM_STANDARD
0.5, // tolerance to determine when the DPM feed has changed
1.0 // ratio of rotary accuracy to linear accuracy for DPM calculations
);
setMachineConfiguration(machineConfiguration);
}
/* home positions */
// machineConfiguration.setHomePositionX(toPreciseUnit(0, IN));
// machineConfiguration.setHomePositionY(toPreciseUnit(0, IN));
// machineConfiguration.setRetractPlane(toPreciseUnit(0, IN));
}
}
// <<<<< INCLUDED FROM include_files/defineMachine.cpi
// >>>>> INCLUDED FROM include_files/defineWorkPlane.cpi
validate(settings.workPlaneMethod, "Setting 'workPlaneMethod' is required but not defined.");
function defineWorkPlane(_section, _setWorkPlane) {
var abc = new Vector(0, 0, 0);
if (settings.workPlaneMethod.forceMultiAxisIndexing || !is3D() || machineConfiguration.isMultiAxisConfiguration()) {
if (isPolarModeActive()) {
abc = getCurrentDirection();
} else if (_section.isMultiAxis()) {
forceWorkPlane();
cancelTransformation();
abc = _section.isOptimizedForMachine() ? _section.getInitialToolAxisABC() : _section.getGlobalInitialToolAxis();
} else if (settings.workPlaneMethod.useTiltedWorkplane && settings.workPlaneMethod.eulerConvention != undefined) {
if (settings.workPlaneMethod.eulerCalculationMethod == "machine" && machineConfiguration.isMultiAxisConfiguration()) {
abc = machineConfiguration.getOrientation(getWorkPlaneMachineABC(_section, true)).getEuler2(settings.workPlaneMethod.eulerConvention);
} else {
abc = _section.workPlane.getEuler2(settings.workPlaneMethod.eulerConvention);
}
} else {
abc = getWorkPlaneMachineABC(_section, true);
}
if (_setWorkPlane) {
if (_section.isMultiAxis() || isPolarModeActive()) { // 4-5x simultaneous operations
cancelWorkPlane();
if (_section.isOptimizedForMachine()) {
positionABC(abc, true);
} else {
setCurrentDirection(abc);
}
} else { // 3x and/or 3+2x operations
setWorkPlane(abc);
}
}
} else {
var remaining = _section.workPlane;
if (!isSameDirection(remaining.forward, new Vector(0, 0, 1))) {
error(localize("Tool orientation is not supported."));
return abc;
}
setRotation(remaining);
}
tcp.isSupportedByOperation = isTCPSupportedByOperation(_section);
return abc;
}
function isTCPSupportedByOperation(_section) {
var _tcp = _section.getOptimizedTCPMode() == OPTIMIZE_NONE;
if (!_section.isMultiAxis() && (settings.workPlaneMethod.useTiltedWorkplane ||
(machineConfiguration.isMultiAxisConfiguration() && settings.workPlaneMethod.optimizeType != undefined ?
getWorkPlaneMachineABC(_section, false).isZero() : isSameDirection(machineConfiguration.getSpindleAxis(), getForwardDirection(_section))) ||
settings.workPlaneMethod.optimizeType == OPTIMIZE_HEADS ||
settings.workPlaneMethod.optimizeType == OPTIMIZE_TABLES ||
settings.workPlaneMethod.optimizeType == OPTIMIZE_BOTH)) {
_tcp = false;
}
return _tcp;
}
// <<<<< INCLUDED FROM include_files/defineWorkPlane.cpi
// >>>>> INCLUDED FROM include_files/getWorkPlaneMachineABC.cpi
validate(settings.machineAngles, "Setting 'machineAngles' is required but not defined.");
function getWorkPlaneMachineABC(_section, rotate) {
var currentABC = isFirstSection() ? new Vector(0, 0, 0) : getCurrentABC();
var abc = _section.getABCByPreference(machineConfiguration, _section.workPlane, currentABC, settings.machineAngles.controllingAxis, settings.machineAngles.type, settings.machineAngles.options);
if (!isSameDirection(machineConfiguration.getDirection(abc), _section.workPlane.forward)) {
error(localize("Orientation not supported."));
}
if (rotate) {
if (settings.workPlaneMethod.optimizeType == undefined || settings.workPlaneMethod.useTiltedWorkplane) { // legacy
var useTCP = false;
var R = machineConfiguration.getRemainingOrientation(abc, _section.workPlane);
setRotation(useTCP ? _section.workPlane : R);
} else {
if (!_section.isOptimizedForMachine()) {
machineConfiguration.setToolLength(getSetting("workPlaneMethod.compensateToolLength", false) ? getBodyLength(_section.getTool()) : 0); // define the tool length for head adjustments
_section.optimize3DPositionsByMachine(machineConfiguration, abc, settings.workPlaneMethod.optimizeType);
}
}
}
return abc;
}
// <<<<< INCLUDED FROM include_files/getWorkPlaneMachineABC.cpi
// >>>>> INCLUDED FROM include_files/workPlaneFunctions_siemens.cpi
var currentWorkPlaneABC = undefined;
function forceWorkPlane() {
currentWorkPlaneABC = undefined;
}
function cancelWorkPlane(force) {
if (settings.workPlaneMethod.useTiltedWorkplane) {
if (state.twpIsActive || force) {
writeBlock("CYCLE800()");
state.twpIsActive = false;
machineSimulation({}); // update machine simulation TWP state
forceWorkPlane();
}
}
}
/** Returns the CYCLE800 configuration to use for the selected mode. */
function getCycle800Config(abc) {
var options = [];
switch (getProperty("cycle800Mode")) {
case "39":
options.push(39, abc, EULER_ZXY_R);
break;
case "27":
options.push(27, abc, EULER_ZYX_R);
break;
case "57":
options.push(57, abc, EULER_XYZ_R);
break;
case "45":
options.push(45, abc, EULER_XZY_R);
break;
case "30":
options.push(30, abc, EULER_YZX_R);
break;
case "54":
options.push(54, abc, EULER_YXZ_R);
break;
case "192":
if (!machineConfiguration.isMultiAxisConfiguration()) {
error(localize("CYCL800 Mode 192 cannot be used without a multi-axis machine configuration."));
return options;
}
var abcDirect = new Vector(0, 0, 0);
var axes = new Array(machineConfiguration.getAxisU(), machineConfiguration.getAxisV(), machineConfiguration.getAxisW());
for (var i = 0; i < machineConfiguration.getNumberOfAxes() - 3; ++i) {
if (axes[i].isEnabled()) {
abcDirect.setCoordinate(i, abc.getCoordinate(axes[i].getCoordinate()));
}
}
options.push(192, abcDirect);
break;
default:
error(localize("Unknown CYCLE800 mode selected."));
return undefined;
}
return options;
}
function setWorkPlane(abc) {
if (!settings.workPlaneMethod.forceMultiAxisIndexing && is3D() && !machineConfiguration.isMultiAxisConfiguration()) {
return; // ignore
}
var workplaneIsRequired = (currentWorkPlaneABC == undefined) ||
abcFormat.areDifferent(abc.x, currentWorkPlaneABC.x) ||
abcFormat.areDifferent(abc.y, currentWorkPlaneABC.y) ||
abcFormat.areDifferent(abc.z, currentWorkPlaneABC.z);
writeStartBlocks(workplaneIsRequired, function () {
writeRetract(Z);
if (getSetting("retract.homeXY.onIndexing", false)) {
writeRetract(settings.retract.homeXY.onIndexing);
}
if (settings.workPlaneMethod.useTiltedWorkplane) {
onCommand(COMMAND_UNLOCK_MULTI_AXIS);
var cycle800Config = getCycle800Config(abc);
var DIR = integerFormat.format(-1); // direction
if (machineConfiguration.isMultiAxisConfiguration()) {
var machineABC = abc.isNonZero() ? (currentSection.isMultiAxis() ? getCurrentDirection() : getWorkPlaneMachineABC(currentSection, false)) : abc;
DIR = integerFormat.format(abcFormat.getResultingValue(machineABC.getCoordinate(machineConfiguration.getAxisU().getCoordinate())) >= 0 ? 1 : -1);
if (settings.workPlaneMethod.useABCPrepositioning || machineABC.isZero()) {
positionABC(machineABC, false);
} else {
setCurrentABC(machineABC);
}
}
var FR = getProperty("cycle800RetractMethod"); // 0 = without moving to safety plane, 1 = move to safety plane only in Z, 2 = move to safety plane Z,X,Y
var TC = "\"" + getProperty("cycle800SwivelDataRecord") + "\"";
var ST = integerFormat.format(0);
var MODE = cycle800Config[0];
var X0 = integerFormat.format(0);
var Y0 = integerFormat.format(0);
var Z0 = integerFormat.format(0);
var A = abcFormat.format(cycle800Config[1].x);
var B = abcFormat.format(cycle800Config[1].y);
var C = abcFormat.format(cycle800Config[1].z);
var X1 = integerFormat.format(0);
var Y1 = integerFormat.format(0);
var Z1 = integerFormat.format(0);
var FR_I = "";
var DMODE = integerFormat.format(0); // keep the previous plane active
writeBlock(
"CYCLE800(" + [FR, TC, ST, MODE, X0, Y0, Z0, A, B, C, X1, Y1, Z1, DIR +
(getProperty("useExtendedCycles") ? ("," + [FR_I, DMODE].join(",")) : "")].join(",") + ")"
);
state.twpIsActive = abc.isNonZero();
machineSimulation({a:getCurrentABC().x, b:getCurrentABC().y, c:getCurrentABC().z, coordinates:MACHINE, eulerAngles:abc});
} else {
positionABC(abc, true);
}
forceABC();
forceXYZ();
if (!currentSection.isMultiAxis()) {
onCommand(COMMAND_LOCK_MULTI_AXIS);
}
currentWorkPlaneABC = abc;
});
}
// <<<<< INCLUDED FROM include_files/workPlaneFunctions_siemens.cpi
// >>>>> INCLUDED FROM include_files/initialPositioning_siemens.cpi
/**
* Writes the initial positioning procedure for a section to get to the start position of the toolpath.
* @param {Vector} position The initial position to move to
* @param {boolean} isRequired true: Output full positioning, false: Output full positioning in optional state or output simple positioning only
* @param {String} codes1 Allows to add additional code to the first positioning line
* @param {String} codes2 Allows to add additional code to the second positioning line (if applicable)
* @example
var myVar1 = formatWords("T" + tool.number, currentSection.wcs);
var myVar2 = getCoolantCodes(tool.coolant);
writeInitialPositioning(initialPosition, isRequired, myVar1, myVar2);
*/
function writeInitialPositioning(position, isRequired, codes1, codes2) {
var motionCode = {single:0, multi:0};
switch (highFeedMapping) {
case HIGH_FEED_MAP_ANY:
motionCode = {single:1, multi:1}; // map all rapid traversals to high feed
break;
case HIGH_FEED_MAP_MULTI:
motionCode = {single:0, multi:1}; // map rapid traversal along more than one axis to high feed
break;
}
var feed = (highFeedMapping != HIGH_FEED_NO_MAPPING) ? getFeed(highFeedrate) : "";
var additionalCodes = [formatWords(codes1), formatWords(codes2)];
forceModals(gMotionModal);
writeStartBlocks(isRequired, function() {
var modalCodes = formatWords(gAbsIncModal.format(90), gPlaneModal.format(17));
// multi axis prepositioning with TWP
if (machineConfiguration.isHeadConfiguration()) { // head/head head/table kinematics
cancelTransformation();
var machineABC = currentSection.isMultiAxis() ? defineWorkPlane(currentSection, false) : getWorkPlaneMachineABC(currentSection, false);
machineConfiguration.setToolLength(getSetting("workPlaneMethod.compensateToolLength", false) ? getBodyLength(currentSection.getTool()) : 0); // define the tool length for head adjustments
var mode = currentSection.isOptimizedForMachine() ? TCP_XYZ_OPTIMIZED : TCP_XYZ;
var globalPosition = getGlobalPosition(currentSection.getInitialPosition());
var machinePosition = machineConfiguration.getOptimizedPosition(globalPosition, machineABC, mode, OPTIMIZE_BOTH, true);
cancelWorkPlane();
positionABC(machineABC);
var prePosition;
if (currentSection.isOptimizedForMachine()) {
prePosition = position;
} else if (settings.workPlaneMethod.useTiltedWorkplane) {
prePosition = currentSection.isMultiAxis() ? position : (tcp.isSupportedByMachine ? globalPosition : machinePosition);
} else {
prePosition = currentSection.isMultiAxis() ? position : globalPosition;
}
if (tcp.isSupportedByMachine) {
setTCP(true); // force TCP for prepositioning although the operation may not require it
}
writeBlock(modalCodes, gMotionModal.format(motionCode.multi),
xOutput.format(prePosition.x), yOutput.format(prePosition.y), feed, additionalCodes[0]);
machineSimulation({x:prePosition.x, y:prePosition.y});
writeBlock(modalCodes, gMotionModal.format(motionCode.multi), zOutput.format(prePosition.z), feed, additionalCodes[1]);
machineSimulation({z:prePosition.z});
setTCP(tcp.isSupportedByOperation); // enable/disable TCP depending if it is supported by the operation
if (!currentSection.isMultiAxis()) {
var saveCycle800RetractMode = getProperty("cycle800RetractMethod", undefined);
if (saveCycle800RetractMode != undefined) {
setProperty("cycle800RetractMethod", "0"); // disable CYCLE800 retract during prepositioning for head kinematics
}
var saveRetractedState = [state.retractedX, state.retractedY, state.retractedZ];
state.retractedX = state.retractedY = state.retractedZ = true; // set retracted states to true to avoid retraction
defineWorkPlane(currentSection, true);
[state.retractedX, state.retractedY, state.retractedZ] = saveRetractedState; // restore retracted states
if (saveCycle800RetractMode != undefined) {
setProperty("cycle800RetractMethod", saveCycle800RetractMode); // reset CYCLE800 retract mode
}
}
} else {
if (currentSection.isMultiAxis() && getSetting("workPlaneMethod.prepositionWithTWP", true) && getSetting("workPlaneMethod.useTiltedWorkplane", false) &&
tcp.isSupportedByOperation && getCurrentDirection().isNonZero()) {
var W = machineConfiguration.isMultiAxisConfiguration() ? machineConfiguration.getOrientation(getCurrentDirection()) :
Matrix.getOrientationFromDirection(getCurrentDirection());
var prePosition = W.getTransposed().multiply(position);
var angles = settings.workPlaneMethod.eulerConvention != undefined ? W.getEuler2(settings.workPlaneMethod.eulerConvention) : getCurrentDirection();
setWorkPlane(angles, true);
writeBlock(modalCodes, gMotionModal.format(motionCode.multi), xOutput.format(prePosition.x), yOutput.format(prePosition.y), feed, additionalCodes[0]);
machineSimulation({x:prePosition.x, y:prePosition.y});
cancelWorkPlane();
writeBlock(additionalCodes[1]); // omit Z-axis output is desired
forceAny(); // required to output XYZ coordinates in the following line
if (tcp.isSupportedByOperation) {
setTCP(true);
}
} else {
if (tcp.isSupportedByOperation) {
setTCP(true);
}
writeBlock(modalCodes, gMotionModal.format(motionCode.multi), xOutput.format(position.x), yOutput.format(position.y), feed, additionalCodes[0]);
machineSimulation({x:position.x, y:position.y});
writeBlock(gMotionModal.format(motionCode.single), zOutput.format(position.z), additionalCodes[1]);
machineSimulation(tcp.isSupportedByOperation ? {x:position.x, y:position.y, z:position.z} : {z:position.z});
}
}
forceModals(gMotionModal);
if (isRequired) {
additionalCodes = []; // clear additionalCodes buffer
}
});
if (!isRequired) { // simple positioning
var modalCodes = formatWords(gAbsIncModal.format(90), gPlaneModal.format(17));
forceXYZ();
if (!state.retractedZ && xyzFormat.getResultingValue(getCurrentPosition().z) < xyzFormat.getResultingValue(position.z)) {
writeBlock(modalCodes, gMotionModal.format(motionCode.single), zOutput.format(position.z), feed);
machineSimulation({z:position.z});
}
writeBlock(modalCodes, gMotionModal.format(motionCode.multi), xOutput.format(position.x), yOutput.format(position.y), feed, additionalCodes);
machineSimulation({x:position.x, y:position.y});
}
if (!state.tcpIsActive && isTCPSupportedByOperation(currentSection)) {
error(localize("Internal error, TCP is required but was not output by the postprocessor."));
}
}
Matrix.getOrientationFromDirection = function (ijk) {
var forward = ijk;
var unitZ = new Vector(0, 0, 1);
var W;
if (Math.abs(Vector.dot(forward, unitZ)) < 0.5) {
var imX = Vector.cross(forward, unitZ).getNormalized();
W = new Matrix(imX, Vector.cross(forward, imX), forward);
} else {
var imX = Vector.cross(new Vector(0, 1, 0), forward).getNormalized();
W = new Matrix(imX, Vector.cross(forward, imX), forward);
}
return W;
};
// <<<<< INCLUDED FROM include_files/initialPositioning_siemens.cpi
// >>>>> INCLUDED FROM include_files/positionABC.cpi
function positionABC(abc, force) {
if (!machineConfiguration.isMultiAxisConfiguration()) {
error("Function 'positionABC' can only be used with multi-axis machine configurations.");
}
if (typeof unwindABC == "function") {
unwindABC(abc);
}
if (force) {
forceABC();
}
var a = aOutput.format(abc.x);
var b = bOutput.format(abc.y);
var c = cOutput.format(abc.z);
if (a || b || c) {
writeRetract(Z);
if (getSetting("retract.homeXY.onIndexing", false)) {
writeRetract(settings.retract.homeXY.onIndexing);
}
onCommand(COMMAND_UNLOCK_MULTI_AXIS);
gMotionModal.reset();
writeBlock(gMotionModal.format(0), a, b, c);
setCurrentABC(abc); // required for machine simulation
machineSimulation({a:abc.x, b:abc.y, c:abc.z, coordinates:MACHINE});
}
}
// <<<<< INCLUDED FROM include_files/positionABC.cpi
// >>>>> INCLUDED FROM include_files/writeWCS.cpi
function writeWCS(section, wcsIsRequired) {
if (section.workOffset != currentWorkOffset) {
if (getSetting("workPlaneMethod.cancelTiltFirst", false) && wcsIsRequired) {
cancelWorkPlane();
}
if (typeof forceWorkPlane == "function" && wcsIsRequired) {
forceWorkPlane();
}
writeStartBlocks(wcsIsRequired, function () {
writeBlock(section.wcs);
});
currentWorkOffset = section.workOffset;
}
}
// <<<<< INCLUDED FROM include_files/writeWCS.cpi
// >>>>> INCLUDED FROM include_files/writeToolCall.cpi
function writeToolCall(tool, insertToolCall) {
if (!isFirstSection()) {
writeStartBlocks(!getProperty("safeStartAllOperations") && insertToolCall, function () {
writeRetract(Z); // write optional Z retract before tool change if safeStartAllOperations is enabled
});
}
writeStartBlocks(insertToolCall, function () {
writeRetract(Z);
if (getSetting("retract.homeXY.onToolChange", false)) {
writeRetract(settings.retract.homeXY.onToolChange);
}
if (!isFirstSection() && insertToolCall) {
if (typeof forceWorkPlane == "function") {
forceWorkPlane();
}
onCommand(COMMAND_COOLANT_OFF); // turn off coolant on tool change
if (typeof disableLengthCompensation == "function") {
disableLengthCompensation(false);
}
}
if (tool.manualToolChange) {
onCommand(COMMAND_STOP);
writeComment("MANUAL TOOL CHANGE TO T" + toolFormat.format(tool.number));
} else {
if (!isFirstSection() && getProperty("optionalStop") && insertToolCall) {
onCommand(COMMAND_OPTIONAL_STOP);
}
onCommand(COMMAND_LOAD_TOOL);
}
});
if (typeof forceModals == "function" && (insertToolCall || getProperty("safeStartAllOperations"))) {
forceModals();
}
}
// <<<<< INCLUDED FROM include_files/writeToolCall.cpi
// >>>>> INCLUDED FROM include_files/startSpindle.cpi
function startSpindle(tool, insertToolCall) {
if (tool.type != TOOL_PROBE) {
var spindleSpeedIsRequired = insertToolCall || forceSpindleSpeed || isFirstSection() ||
rpmFormat.areDifferent(spindleSpeed, sOutput.getCurrent()) ||
(tool.clockwise != getPreviousSection().getTool().clockwise);
writeStartBlocks(spindleSpeedIsRequired, function () {
if (spindleSpeedIsRequired || operationNeedsSafeStart) {
onCommand(COMMAND_START_SPINDLE);
}
});
}
}
// <<<<< INCLUDED FROM include_files/startSpindle.cpi
// >>>>> INCLUDED FROM include_files/parametricFeeds.cpi
properties.useParametricFeed = {
title : "Parametric feed",
description: "Specifies that the feedrates should be output using parameters.",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
};
var activeMovements;
var currentFeedId;
validate(settings.parametricFeeds, "Setting 'parametricFeeds' is required but not defined.");
function initializeParametricFeeds(insertToolCall) {
if (getProperty("useParametricFeed") && getParameter("operation-strategy") != "drill" && !currentSection.hasAnyCycle()) {
if (!insertToolCall && activeMovements && (getCurrentSectionId() > 0) &&
((getPreviousSection().getPatternId() == currentSection.getPatternId()) && (currentSection.getPatternId() != 0))) {
return; // use the current feeds
}
} else {
activeMovements = undefined;
return;
}
activeMovements = new Array();
var movements = currentSection.getMovements();
var id = 0;
var activeFeeds = new Array();
if (hasParameter("operation:tool_feedCutting")) {
if (movements & ((1 << MOVEMENT_CUTTING) | (1 << MOVEMENT_LINK_TRANSITION) | (1 << MOVEMENT_EXTENDED))) {
var feedContext = new FeedContext(id, localize("Cutting"), getParameter("operation:tool_feedCutting"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_CUTTING] = feedContext;
if (!hasParameter("operation:tool_feedTransition")) {
activeMovements[MOVEMENT_LINK_TRANSITION] = feedContext;
}
activeMovements[MOVEMENT_EXTENDED] = feedContext;
}
++id;
if (movements & (1 << MOVEMENT_PREDRILL)) {
feedContext = new FeedContext(id, localize("Predrilling"), getParameter("operation:tool_feedCutting"));
activeMovements[MOVEMENT_PREDRILL] = feedContext;
activeFeeds.push(feedContext);
}
++id;
}
if (hasParameter("operation:finishFeedrate")) {
if (movements & (1 << MOVEMENT_FINISH_CUTTING)) {
var feedContext = new FeedContext(id, localize("Finish"), getParameter("operation:finishFeedrate"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_FINISH_CUTTING] = feedContext;
}
++id;
} else if (hasParameter("operation:tool_feedCutting")) {
if (movements & (1 << MOVEMENT_FINISH_CUTTING)) {
var feedContext = new FeedContext(id, localize("Finish"), getParameter("operation:tool_feedCutting"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_FINISH_CUTTING] = feedContext;
}
++id;
}
if (hasParameter("operation:tool_feedEntry")) {
if (movements & (1 << MOVEMENT_LEAD_IN)) {
var feedContext = new FeedContext(id, localize("Entry"), getParameter("operation:tool_feedEntry"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_LEAD_IN] = feedContext;
}
++id;
}
if (hasParameter("operation:tool_feedExit")) {
if (movements & (1 << MOVEMENT_LEAD_OUT)) {
var feedContext = new FeedContext(id, localize("Exit"), getParameter("operation:tool_feedExit"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_LEAD_OUT] = feedContext;
}
++id;
}
if (hasParameter("operation:noEngagementFeedrate")) {
if (movements & (1 << MOVEMENT_LINK_DIRECT)) {
var feedContext = new FeedContext(id, localize("Direct"), getParameter("operation:noEngagementFeedrate"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_LINK_DIRECT] = feedContext;
}
++id;
} else if (hasParameter("operation:tool_feedCutting") &&
hasParameter("operation:tool_feedEntry") &&
hasParameter("operation:tool_feedExit")) {
if (movements & (1 << MOVEMENT_LINK_DIRECT)) {
var feedContext = new FeedContext(id, localize("Direct"), Math.max(getParameter("operation:tool_feedCutting"), getParameter("operation:tool_feedEntry"), getParameter("operation:tool_feedExit")));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_LINK_DIRECT] = feedContext;
}
++id;
}
if (hasParameter("operation:reducedFeedrate")) {
if (movements & (1 << MOVEMENT_REDUCED)) {
var feedContext = new FeedContext(id, localize("Reduced"), getParameter("operation:reducedFeedrate"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_REDUCED] = feedContext;
}
++id;
}
if (hasParameter("operation:tool_feedRamp")) {
if (movements & ((1 << MOVEMENT_RAMP) | (1 << MOVEMENT_RAMP_HELIX) | (1 << MOVEMENT_RAMP_PROFILE) | (1 << MOVEMENT_RAMP_ZIG_ZAG))) {
var feedContext = new FeedContext(id, localize("Ramping"), getParameter("operation:tool_feedRamp"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_RAMP] = feedContext;
activeMovements[MOVEMENT_RAMP_HELIX] = feedContext;
activeMovements[MOVEMENT_RAMP_PROFILE] = feedContext;
activeMovements[MOVEMENT_RAMP_ZIG_ZAG] = feedContext;
}
++id;
}
if (hasParameter("operation:tool_feedPlunge")) {
if (movements & (1 << MOVEMENT_PLUNGE)) {
var feedContext = new FeedContext(id, localize("Plunge"), getParameter("operation:tool_feedPlunge"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_PLUNGE] = feedContext;
}
++id;
}
if (true) { // high feed
if ((movements & (1 << MOVEMENT_HIGH_FEED)) || (highFeedMapping != HIGH_FEED_NO_MAPPING)) {
var feed;
if (hasParameter("operation:highFeedrateMode") && getParameter("operation:highFeedrateMode") != "disabled") {
feed = getParameter("operation:highFeedrate");
} else {
feed = this.highFeedrate;
}
var feedContext = new FeedContext(id, localize("High Feed"), feed);
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_HIGH_FEED] = feedContext;
activeMovements[MOVEMENT_RAPID] = feedContext;
}
++id;
}
if (hasParameter("operation:tool_feedTransition")) {
if (movements & (1 << MOVEMENT_LINK_TRANSITION)) {
var feedContext = new FeedContext(id, localize("Transition"), getParameter("operation:tool_feedTransition"));
activeFeeds.push(feedContext);
activeMovements[MOVEMENT_LINK_TRANSITION] = feedContext;
}
++id;
}
for (var i = 0; i < activeFeeds.length; ++i) {
var feedContext = activeFeeds[i];
var feedDescription = typeof formatComment == "function" ? formatComment(feedContext.description) : feedContext.description;
writeBlock(settings.parametricFeeds.feedAssignmentVariable + (settings.parametricFeeds.firstFeedParameter + feedContext.id) + "=" + feedFormat.format(feedContext.feed) + SP + feedDescription);
}
}
function FeedContext(id, description, feed) {
this.id = id;
this.description = description;
this.feed = feed;
}
// <<<<< INCLUDED FROM include_files/parametricFeeds.cpi
// >>>>> INCLUDED FROM include_files/coolant.cpi
var currentCoolantMode = COOLANT_OFF;
var coolantOff = undefined;
var isOptionalCoolant = false;
var forceCoolant = false;
function setCoolant(coolant) {
var coolantCodes = getCoolantCodes(coolant);
if (Array.isArray(coolantCodes)) {
writeStartBlocks(!isOptionalCoolant, function () {
if (settings.coolant.singleLineCoolant) {
writeBlock(coolantCodes.join(getWordSeparator()));
} else {
for (var c in coolantCodes) {
writeBlock(coolantCodes[c]);
}
}
});
return undefined;
}
return coolantCodes;
}
function getCoolantCodes(coolant, format) {
if (!getProperty("useCoolant", true)) {
return undefined; // coolant output is disabled by property if it exists
}
isOptionalCoolant = false;
if (typeof operationNeedsSafeStart == "undefined") {
operationNeedsSafeStart = false;
}
var multipleCoolantBlocks = new Array(); // create a formatted array to be passed into the outputted line
var coolants = settings.coolant.coolants;
if (!coolants) {
error(localize("Coolants have not been defined."));
}
if (tool.type && tool.type == TOOL_PROBE) { // avoid coolant output for probing
coolant = COOLANT_OFF;
}
if (coolant == currentCoolantMode) {
if (operationNeedsSafeStart && coolant != COOLANT_OFF) {
isOptionalCoolant = true;
} else if (!forceCoolant || coolant == COOLANT_OFF) {
return undefined; // coolant is already active
}
}
if ((coolant != COOLANT_OFF) && (currentCoolantMode != COOLANT_OFF) && (coolantOff != undefined) && !forceCoolant && !isOptionalCoolant) {
if (Array.isArray(coolantOff)) {
for (var i in coolantOff) {
multipleCoolantBlocks.push(coolantOff[i]);
}
} else {
multipleCoolantBlocks.push(coolantOff);
}
}
forceCoolant = false;
var m;
var coolantCodes = {};
for (var c in coolants) { // find required coolant codes into the coolants array
if (coolants[c].id == coolant) {
coolantCodes.on = coolants[c].on;
if (coolants[c].off != undefined) {
coolantCodes.off = coolants[c].off;
break;
} else {
for (var i in coolants) {
if (coolants[i].id == COOLANT_OFF) {
coolantCodes.off = coolants[i].off;
break;
}
}
}
}
}
if (coolant == COOLANT_OFF) {
m = !coolantOff ? coolantCodes.off : coolantOff; // use the default coolant off command when an 'off' value is not specified
} else {
coolantOff = coolantCodes.off;
m = coolantCodes.on;
}
if (!m) {
onUnsupportedCoolant(coolant);
m = 9;
} else {
if (Array.isArray(m)) {
for (var i in m) {
multipleCoolantBlocks.push(m[i]);
}
} else {
multipleCoolantBlocks.push(m);
}
currentCoolantMode = coolant;
for (var i in multipleCoolantBlocks) {
if (typeof multipleCoolantBlocks[i] == "number") {
multipleCoolantBlocks[i] = mFormat.format(multipleCoolantBlocks[i]);
}
}
if (format == undefined || format) {
return multipleCoolantBlocks; // return the single formatted coolant value
} else {
return m; // return unformatted coolant value
}
}
return undefined;
}
// <<<<< INCLUDED FROM include_files/coolant.cpi
// >>>>> INCLUDED FROM include_files/smoothing.cpi
// collected state below, do not edit
validate(settings.smoothing, "Setting 'smoothing' is required but not defined.");
var smoothing = {
cancel : false, // cancel tool length prior to update smoothing for this operation
isActive : false, // the current state of smoothing
isAllowed : false, // smoothing is allowed for this operation
isDifferent: false, // tells if smoothing levels/tolerances/both are different between operations
level : -1, // the active level of smoothing
tolerance : -1, // the current operation tolerance
force : false // smoothing needs to be forced out in this operation
};
function initializeSmoothing() {
var smoothingSettings = settings.smoothing;
var previousLevel = smoothing.level;
var previousTolerance = xyzFormat.getResultingValue(smoothing.tolerance);
// format threshold parameters
var thresholdRoughing = xyzFormat.getResultingValue(smoothingSettings.thresholdRoughing);
var thresholdSemiFinishing = xyzFormat.getResultingValue(smoothingSettings.thresholdSemiFinishing);
var thresholdFinishing = xyzFormat.getResultingValue(smoothingSettings.thresholdFinishing);
// determine new smoothing levels and tolerances
smoothing.level = parseInt(getProperty("useSmoothing"), 10);
smoothing.level = isNaN(smoothing.level) ? -1 : smoothing.level;
smoothing.tolerance = xyzFormat.getResultingValue(Math.max(getParameter("operation:tolerance", thresholdFinishing), 0));
if (smoothing.level == 9999) {
if (smoothingSettings.autoLevelCriteria == "stock") { // determine auto smoothing level based on stockToLeave
var stockToLeave = xyzFormat.getResultingValue(getParameter("operation:stockToLeave", getParameter("operation:verticalStockToLeave", 0)));
var verticalStockToLeave = xyzFormat.getResultingValue(getParameter("operation:verticalStockToLeave", stockToLeave));
if (((stockToLeave >= thresholdRoughing) && (verticalStockToLeave >= thresholdRoughing)) || getParameter("operation:strategy", "") == "face") {
smoothing.level = smoothingSettings.roughing; // set roughing level
} else {
if (((stockToLeave >= thresholdSemiFinishing) && (stockToLeave < thresholdRoughing)) &&
((verticalStockToLeave >= thresholdSemiFinishing) && (verticalStockToLeave < thresholdRoughing))) {
smoothing.level = smoothingSettings.semi; // set semi level
} else if (((stockToLeave >= thresholdFinishing) && (stockToLeave < thresholdSemiFinishing)) &&
((verticalStockToLeave >= thresholdFinishing) && (verticalStockToLeave < thresholdSemiFinishing))) {
smoothing.level = smoothingSettings.semifinishing; // set semi-finishing level
} else {
smoothing.level = smoothingSettings.finishing; // set finishing level
}
}
} else { // detemine auto smoothing level based on operation tolerance instead of stockToLeave
if (smoothing.tolerance >= thresholdRoughing || getParameter("operation:strategy", "") == "face") {
smoothing.level = smoothingSettings.roughing; // set roughing level
} else {
if (((smoothing.tolerance >= thresholdSemiFinishing) && (smoothing.tolerance < thresholdRoughing))) {
smoothing.level = smoothingSettings.semi; // set semi level
} else if (((smoothing.tolerance >= thresholdFinishing) && (smoothing.tolerance < thresholdSemiFinishing))) {
smoothing.level = smoothingSettings.semifinishing; // set semi-finishing level
} else {
smoothing.level = smoothingSettings.finishing; // set finishing level
}
}
}
}
if (smoothing.level == -1) { // useSmoothing is disabled
smoothing.isAllowed = false;
} else { // do not output smoothing for the following operations
smoothing.isAllowed = !(currentSection.getTool().type == TOOL_PROBE || isDrillingCycle());
}
if (!smoothing.isAllowed) {
smoothing.level = -1;
smoothing.tolerance = -1;
}
switch (smoothingSettings.differenceCriteria) {
case "level":
smoothing.isDifferent = smoothing.level != previousLevel;
break;
case "tolerance":
smoothing.isDifferent = smoothing.tolerance != previousTolerance;
break;
case "both":
smoothing.isDifferent = smoothing.level != previousLevel || smoothing.tolerance != previousTolerance;
break;
default:
error(localize("Unsupported smoothing criteria."));
return;
}
// tool length compensation needs to be canceled when smoothing state/level changes
if (smoothingSettings.cancelCompensation) {
smoothing.cancel = !isFirstSection() && smoothing.isDifferent;
}
}
// <<<<< INCLUDED FROM include_files/smoothing.cpi
// >>>>> INCLUDED FROM include_files/writeWorkPiece.cpi
// Calculate stock extents for a cylinder or tube
// Returns a vector with lower limit in x, upper limit in y, and diameter in z
function getStockExtents(workpiece) {
var extents = new Vector(0, 0, toPreciseUnit(getGlobalParameter("stock-diameter", 0), MM));
var stockType = getGlobalParameter("stock-type", "");
if (stockType == "cylinder" || stockType == "tube") {
if (xyzFormat.getResultingValue(workpiece.upper.x - workpiece.lower.x) != xyzFormat.getResultingValue(extents.z)) {
extents.setX(workpiece.lower.x);
extents.setY(workpiece.upper.x);
} else if (xyzFormat.getResultingValue(workpiece.upper.y - workpiece.lower.y) != xyzFormat.getResultingValue(extents.z)) {
extents.setX(workpiece.lower.y);
extents.setY(workpiece.upper.y);
} else if (xyzFormat.getResultingValue(workpiece.upper.z - workpiece.lower.z) != xyzFormat.getResultingValue(extents.z)) {
extents.setX(workpiece.lower.z);
extents.setY(workpiece.upper.z);
} else { // the cylinder forms a square cube, determine the axis based on the rotary table
if (machineConfiguration.isMultiAxisConfiguration()) {
var ix;
if (machineConfiguration.getAxisV().isEnabled() && machineConfiguration.getAxisV().isTable()) {
ix = machineConfiguration.getAxisV().getCoordinate();
} else if (machineConfiguration.getAxisU().isEnabled() && machineConfiguration.getAxisU().isTable()) {
ix = machineConfiguration.getAxisV().getCoordinate();
} else { // could not determine cylinder axis
return undefined;
}
extents.setX(workpiece.lower.getCoordinate(ix));
extents.setY(workpiece.upper.getCoordinate(ix));
}
}
} else {
return undefined;
}
return extents;
}
var axisDesignators = new Array("A", "B", "C");
function writeWorkPiece() {
if (hasGlobalParameter("stock-type")) {
var workpiece = getWorkpiece();
var workpieceType = getGlobalParameter("stock-type");
var delta = Vector.diff(workpiece.upper, workpiece.lower);
if (workpieceType != "custom" && delta.isNonZero()) { // stock - workpiece
// determine table that stock is placed on
var referencePoint = "\"\"";
if (machineConfiguration.isMultiAxisConfiguration()) {
if (machineConfiguration.getAxisV().isEnabled() && machineConfiguration.getAxisV().isTable()) {
referencePoint = "\"" + axisDesignators[machineConfiguration.getAxisV().getCoordinate()] + "\"";
} else if (machineConfiguration.getAxisU().isEnabled() && machineConfiguration.getAxisU().isTable()) {
referencePoint = "\"" + axisDesignators[machineConfiguration.getAxisU().getCoordinate()] + "\"";
}
}
var extents = getStockExtents(workpiece);
var parameters = []; // array to store WORKPIECE parameters by their index
parameters[1] = referencePoint;
switch (workpieceType) {
case "box":
parameters[3] = "\"" + "BOX" + "\""; // stock shape
parameters[4] = 112;
parameters[5] = xyzFormat.format(workpiece.upper.z);
parameters[6] = xyzFormat.format(workpiece.lower.z);
parameters[8] = xyzFormat.format(workpiece.upper.x);
parameters[9] = xyzFormat.format(workpiece.upper.y);
parameters[10] = xyzFormat.format(workpiece.lower.x);
parameters[11] = xyzFormat.format(workpiece.lower.y);
break;
case "tube":
case "cylinder":
parameters[3] = "\"" + (workpieceType == "tube" ? "PIPE" : "CYLINDER") + "\""; // stock shape
parameters[4] = workpieceType == "tube" ? 320 : 64;
if (!extents) {
break;
}
parameters[5] = xyzFormat.format(extents.y);
parameters[6] = xyzFormat.format(extents.x);
parameters[8] = xyzFormat.format(extents.z);
if (workpieceType == "tube") {
parameters[9] = xyzFormat.format(toPreciseUnit(getGlobalParameter("stock-diameter-inner"), MM));
}
break;
}
writeBlock("WORKPIECE" + "(" + parameters.join() + ")");
}
}
}
// <<<<< INCLUDED FROM include_files/writeWorkPiece.cpi
// >>>>> INCLUDED FROM include_files/writeProgramHeader.cpi
properties.writeMachine = {
title : "Write machine",
description: "Output the machine settings in the header of the program.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
};
properties.writeTools = {
title : "Write tool list",
description: "Output a tool list in the header of the program.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
};
function writeProgramHeader() {
// dump machine configuration
var vendor = machineConfiguration.getVendor();
var model = machineConfiguration.getModel();
var mDescription = machineConfiguration.getDescription();
if (getProperty("writeMachine") && (vendor || model || mDescription)) {
writeComment(localize("Machine"));
if (vendor) {
writeComment(" " + localize("vendor") + ": " + vendor);
}
if (model) {
writeComment(" " + localize("model") + ": " + model);
}
if (mDescription) {
writeComment(" " + localize("description") + ": " + mDescription);
}
}
// dump tool information
if (getProperty("writeTools")) {
if (false) { // set to true to use the post kernel version of the tool list
writeToolTable(TOOL_NUMBER_COL);
} else {
var zRanges = {};
if (is3D()) {
var numberOfSections = getNumberOfSections();
for (var i = 0; i < numberOfSections; ++i) {
var section = getSection(i);
var zRange = section.getGlobalZRange();
var tool = section.getTool();
if (zRanges[tool.number]) {
zRanges[tool.number].expandToRange(zRange);
} else {
zRanges[tool.number] = zRange;
}
}
}
var tools = getToolTable();
if (tools.getNumberOfTools() > 0) {
for (var i = 0; i < tools.getNumberOfTools(); ++i) {
var tool = tools.getTool(i);
var comment = (getProperty("toolAsName") ? "\"" + tool.description.toUpperCase() + "\"" : "T" + toolFormat.format(tool.number)) + " " +
"D=" + xyzFormat.format(tool.diameter) + " " +
localize("CR") + "=" + xyzFormat.format(tool.cornerRadius);
if ((tool.taperAngle > 0) && (tool.taperAngle < Math.PI)) {
comment += " " + localize("TAPER") + "=" + taperFormat.format(tool.taperAngle) + localize("deg");
}
if (zRanges[tool.number]) {
comment += " - " + localize("ZMIN") + "=" + xyzFormat.format(zRanges[tool.number].getMinimum());
}
comment += " - " + getToolTypeName(tool.type);
writeComment(comment);
}
}
}
}
}
// <<<<< INCLUDED FROM include_files/writeProgramHeader.cpi
// >>>>> INCLUDED FROM include_files/subprograms.cpi
properties.useSubroutines = {
title : "Use subroutines",
description: "Select your desired subroutine option. 'All Operations' creates subroutines per each operation, 'Cycles' creates subroutines for cycle operations on same holes, and 'Patterns' creates subroutines for patterned operations.",
group : "preferences",
type : "enum",
values : [
{title:"No", id:"none"},
{title:"All Operations", id:"allOperations"},
{title:"All Operations & Patterns", id:"allPatterns"},
{title:"Cycles", id:"cycles"},
{title:"Operations, Patterns, Cycles", id:"all"},
{title:"Patterns", id:"patterns"}
],
value: "none",
scope: "post"
};
properties.useFilesForSubprograms = {
title : "Use files for subroutines",
description: "If enabled, subroutines will be saved as individual files.",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
};
var NONE = 0x0000;
var PATTERNS = 0x0001;
var CYCLES = 0x0010;
var ALLOPERATIONS = 0x0100;
var subroutineBitmasks = {
none : NONE,
patterns : PATTERNS,
cycles : CYCLES,
allOperations: ALLOPERATIONS,
allPatterns : PATTERNS + ALLOPERATIONS,
all : PATTERNS + CYCLES + ALLOPERATIONS
};
var SUB_UNKNOWN = 0;
var SUB_PATTERN = 1;
var SUB_CYCLE = 2;
// collected state below, do not edit
validate(settings.subprograms, "Setting 'subprograms' is required but not defined.");
var subprogramState = {
subprograms : [], // Redirection buffer
newSubprogram : false, // Indicate if the current subprogram is new to definedSubprograms
currentSubprogram : 0, // The current subprogram number
lastSubprogram : undefined, // The last subprogram number
definedSubprograms : new Array(), // A collection of pattern and cycle subprograms
saveShowSequenceNumbers: "", // Used to store pre-condition of "showSequenceNumbers"
cycleSubprogramIsActive: false, // Indicate if it's handling a cycle subprogram
patternIsActive : false, // Indicate if it's handling a pattern subprogram
incrementalSubprogram : false, // Indicate if the current subprogram needs to go incremental mode
incrementalMode : false, // Indicate if incremental mode is on
mainProgramNumber : undefined // The main program number
};
function subprogramResolveSetting(_setting, _val, _comment) {
if (typeof _setting == "string") {
return formatWords(_setting.toString().replace("%currentSubprogram", subprogramState.currentSubprogram), (_comment ? formatComment(_comment) : ""));
} else {
return formatWords(_setting + (_val ? settings.subprograms.format.format(_val) : ""), (_comment ? formatComment(_comment) : ""));
}
}
/**
* Start to redirect buffer to subprogram.
* @param {Vector} initialPosition Initial position
* @param {Vector} abc Machine axis angles
* @param {boolean} incremental If the subprogram needs to go incremental mode
*/
function subprogramStart(initialPosition, abc, incremental) {
var comment = getParameter("operation-comment", "");
var startBlock;
if (getProperty("useFilesForSubprograms")) {
var _fileName = subprogramState.currentSubprogram;
var subprogramExtension = extension;
if (settings.subprograms.files) {
if (settings.subprograms.files.prefix != undefined) {
_fileName = subprogramResolveSetting(settings.subprograms.files.prefix, subprogramState.currentSubprogram);
}
if (settings.subprograms.files.extension) {
subprogramExtension = settings.subprograms.files.extension;
}
}
var path = FileSystem.getCombinedPath(FileSystem.getFolderPath(getOutputPath()), _fileName + "." + subprogramExtension);
redirectToFile(path);
startBlock = subprogramResolveSetting(settings.subprograms.startBlock.files, subprogramState.currentSubprogram, comment);
} else {
redirectToBuffer();
startBlock = subprogramResolveSetting(settings.subprograms.startBlock.embedded, subprogramState.currentSubprogram, comment);
}
writeln(startBlock);
subprogramState.saveShowSequenceNumbers = getProperty("showSequenceNumbers", undefined);
if (subprogramState.saveShowSequenceNumbers != undefined) {
setProperty("showSequenceNumbers", "false");
}
if (incremental) {
setAbsIncMode(true, initialPosition, abc);
}
if (typeof gPlaneModal != "undefined" && typeof gMotionModal != "undefined") {
forceModals(gPlaneModal, gMotionModal);
}
}
/** Output the command for calling a subprogram by its subprogram number. */
function subprogramCall() {
var callBlock;
if (getProperty("useFilesForSubprograms")) {
callBlock = subprogramResolveSetting(settings.subprograms.callBlock.files, subprogramState.currentSubprogram);
} else {
callBlock = subprogramResolveSetting(settings.subprograms.callBlock.embedded, subprogramState.currentSubprogram);
}
writeBlock(callBlock); // call subprogram
}
/** End of subprogram and close redirection. */
function subprogramEnd() {
if (isRedirecting()) {
if (subprogramState.newSubprogram) {
var finalPosition = getFramePosition(currentSection.getFinalPosition());
var abc;
if (currentSection.isMultiAxis() && machineConfiguration.isMultiAxisConfiguration()) {
abc = currentSection.getFinalToolAxisABC();
} else {
abc = getCurrentDirection();
}
setAbsIncMode(false, finalPosition, abc);
if (getProperty("useFilesForSubprograms")) {
var endBlockFiles = subprogramResolveSetting(settings.subprograms.endBlock.files);
writeln(endBlockFiles);
} else {
var endBlockEmbedded = subprogramResolveSetting(settings.subprograms.endBlock.embedded);
writeln(endBlockEmbedded);
writeln("");
subprogramState.subprograms += getRedirectionBuffer();
}
}
forceAny();
subprogramState.newSubprogram = false;
subprogramState.cycleSubprogramIsActive = false;
if (subprogramState.saveShowSequenceNumbers != undefined) {
setProperty("showSequenceNumbers", subprogramState.saveShowSequenceNumbers);
}
closeRedirection();
}
}
/** Returns true if the spatial vectors are significantly different. */
function areSpatialVectorsDifferent(_vector1, _vector2) {
return (xyzFormat.getResultingValue(_vector1.x) != xyzFormat.getResultingValue(_vector2.x)) ||
(xyzFormat.getResultingValue(_vector1.y) != xyzFormat.getResultingValue(_vector2.y)) ||
(xyzFormat.getResultingValue(_vector1.z) != xyzFormat.getResultingValue(_vector2.z));
}
/** Returns true if the spatial boxes are a pure translation. */
function areSpatialBoxesTranslated(_box1, _box2) {
return !areSpatialVectorsDifferent(Vector.diff(_box1[1], _box1[0]), Vector.diff(_box2[1], _box2[0])) &&
!areSpatialVectorsDifferent(Vector.diff(_box2[0], _box1[0]), Vector.diff(_box2[1], _box1[1]));
}
/** Returns true if the spatial boxes are same. */
function areSpatialBoxesSame(_box1, _box2) {
return !areSpatialVectorsDifferent(_box1[0], _box2[0]) && !areSpatialVectorsDifferent(_box1[1], _box2[1]);
}
/**
* Search defined pattern subprogram by the given id.
* @param {number} subprogramId Subprogram Id
* @returns {Object} Returns defined subprogram if found, otherwise returns undefined
*/
function getDefinedPatternSubprogram(subprogramId) {
for (var i = 0; i < subprogramState.definedSubprograms.length; ++i) {
if ((SUB_PATTERN == subprogramState.definedSubprograms[i].type) && (subprogramId == subprogramState.definedSubprograms[i].id)) {
return subprogramState.definedSubprograms[i];
}
}
return undefined;
}
/**
* Search defined cycle subprogram pattern by the given id, initialPosition, finalPosition.
* @param {number} subprogramId Subprogram Id
* @param {Vector} initialPosition Initial position of the cycle
* @param {Vector} finalPosition Final position of the cycle
* @returns {Object} Returns defined subprogram if found, otherwise returns undefined
*/
function getDefinedCycleSubprogram(subprogramId, initialPosition, finalPosition) {
for (var i = 0; i < subprogramState.definedSubprograms.length; ++i) {
if ((SUB_CYCLE == subprogramState.definedSubprograms[i].type) && (subprogramId == subprogramState.definedSubprograms[i].id) &&
!areSpatialVectorsDifferent(initialPosition, subprogramState.definedSubprograms[i].initialPosition) &&
!areSpatialVectorsDifferent(finalPosition, subprogramState.definedSubprograms[i].finalPosition)) {
return subprogramState.definedSubprograms[i];
}
}
return undefined;
}
/**
* Creates and returns new defined subprogram
* @param {Section} section The section to create subprogram
* @param {number} subprogramId Subprogram Id
* @param {number} subprogramType Subprogram type, can be SUB_UNKNOWN, SUB_PATTERN or SUB_CYCLE
* @param {Vector} initialPosition Initial position
* @param {Vector} finalPosition Final position
* @returns {Object} Returns new defined subprogram
*/
function defineNewSubprogram(section, subprogramId, subprogramType, initialPosition, finalPosition) {
// determine if this is valid for creating a subprogram
isValid = subprogramIsValid(section, subprogramId, subprogramType);
var subprogram = isValid ? subprogram = ++subprogramState.lastSubprogram : undefined;
subprogramState.definedSubprograms.push({
type : subprogramType,
id : subprogramId,
subProgram : subprogram,
isValid : isValid,
initialPosition: initialPosition,
finalPosition : finalPosition
});
return subprogramState.definedSubprograms[subprogramState.definedSubprograms.length - 1];
}
/** Returns true if the given section is a pattern **/
function isPatternOperation(section) {
return section.isPatterned && section.isPatterned();
}
/** Returns true if the given section is a cycle operation **/
function isCycleOperation(section, minimumCyclePoints) {
return section.doesStrictCycle &&
(section.getNumberOfCycles() == 1) && (section.getNumberOfCyclePoints() >= minimumCyclePoints);
}
/** Returns true if the subroutine bit flag is enabled **/
function isSubProgramEnabledFor(subroutine) {
return subroutineBitmasks[getProperty("useSubroutines")] & subroutine;
}
/**
* Define subprogram based on the property "useSubroutines"
* @param {Vector} _initialPosition Initial position
* @param {Vector} _abc Machine axis angles
*/
function subprogramDefine(_initialPosition, _abc) {
if (isSubProgramEnabledFor(NONE)) {
// Return early
return;
}
if (subprogramState.lastSubprogram == undefined) { // initialize first subprogram number
if (settings.subprograms.initialSubprogramNumber == undefined) {
try {
subprogramState.lastSubprogram = getAsInt(programName);
subprogramState.mainProgramNumber = subprogramState.lastSubprogram; // mainProgramNumber must be a number
} catch (e) {
error(localize("Program name must be a number when using subprograms."));
return;
}
} else {
subprogramState.lastSubprogram = settings.subprograms.initialSubprogramNumber - 1;
// if programName is a string set mainProgramNumber to undefined, if programName is a number set mainProgramNumber to programName
subprogramState.mainProgramNumber = (!isNaN(programName) && !isNaN(parseInt(programName, 10))) ? getAsInt(programName) : undefined;
}
}
// convert patterns into subprograms
subprogramState.patternIsActive = false;
if (isSubProgramEnabledFor(PATTERNS) && isPatternOperation(currentSection)) {
var subprogramId = currentSection.getPatternId();
var subprogramType = SUB_PATTERN;
var subprogramDefinition = getDefinedPatternSubprogram(subprogramId);
subprogramState.newSubprogram = !subprogramDefinition;
if (subprogramState.newSubprogram) {
subprogramDefinition = defineNewSubprogram(currentSection, subprogramId, subprogramType, _initialPosition, _initialPosition);
}
subprogramState.currentSubprogram = subprogramDefinition.subProgram;
if (subprogramDefinition.isValid) {
// make sure Z-position is output prior to subprogram call
var z = zOutput.format(_initialPosition.z);
if (!state.retractedZ && z) {
validate(!validateLengthCompensation || state.lengthCompensationActive, "Tool length compensation is not active."); // make sure that length compensation is enabled
var block = "";
if (typeof gAbsIncModal != "undefined") {
block += gAbsIncModal.format(90);
}
if (typeof gPlaneModal != "undefined") {
block += gPlaneModal.format(17);
}
writeBlock(block);
zOutput.reset();
invokeOnRapid(xOutput.getCurrent(), yOutput.getCurrent(), _initialPosition.z);
}
// call subprogram
subprogramCall();
subprogramState.patternIsActive = true;
if (subprogramState.newSubprogram) {
subprogramStart(_initialPosition, _abc, subprogramState.incrementalSubprogram);
} else {
skipRemainingSection();
setCurrentPosition(getFramePosition(currentSection.getFinalPosition()));
}
}
}
// Patterns are not used, check other cases
if (!subprogramState.patternIsActive) {
// Output cycle operation as subprogram
if (isSubProgramEnabledFor(CYCLES) && isCycleOperation(currentSection, settings.subprograms.minimumCyclePoints)) {
var finalPosition = getFramePosition(currentSection.getFinalPosition());
var subprogramId = currentSection.getNumberOfCyclePoints();
var subprogramType = SUB_CYCLE;
var subprogramDefinition = getDefinedCycleSubprogram(subprogramId, _initialPosition, finalPosition);
subprogramState.newSubprogram = !subprogramDefinition;
if (subprogramState.newSubprogram) {
subprogramDefinition = defineNewSubprogram(currentSection, subprogramId, subprogramType, _initialPosition, finalPosition);
}
subprogramState.currentSubprogram = subprogramDefinition.subProgram;
subprogramState.cycleSubprogramIsActive = subprogramDefinition.isValid;
}
// Neither patterns and cycles are used, check other operations
if (!subprogramState.cycleSubprogramIsActive && isSubProgramEnabledFor(ALLOPERATIONS)) {
// Output all operations as subprograms
subprogramState.currentSubprogram = ++subprogramState.lastSubprogram;
if (subprogramState.mainProgramNumber != undefined && (subprogramState.currentSubprogram == subprogramState.mainProgramNumber)) {
subprogramState.currentSubprogram = ++subprogramState.lastSubprogram; // avoid using main program number for current subprogram
}
subprogramCall();
subprogramState.newSubprogram = true;
subprogramStart(_initialPosition, _abc, false);
}
}
}
/**
* Determine if this is valid for creating a subprogram
* @param {Section} section The section to create subprogram
* @param {number} subprogramId Subprogram Id
* @param {number} subprogramType Subprogram type, can be SUB_UNKNOWN, SUB_PATTERN or SUB_CYCLE
* @returns {boolean} If this is valid for creating a subprogram
*/
function subprogramIsValid(_section, subprogramId, subprogramType) {
var sectionId = _section.getId();
var numberOfSections = getNumberOfSections();
var validSubprogram = subprogramType != SUB_CYCLE;
var masterPosition = new Array();
masterPosition[0] = getFramePosition(_section.getInitialPosition());
masterPosition[1] = getFramePosition(_section.getFinalPosition());
var tempBox = _section.getBoundingBox();
var masterBox = new Array();
masterBox[0] = getFramePosition(tempBox[0]);
masterBox[1] = getFramePosition(tempBox[1]);
var rotation = getRotation();
var translation = getTranslation();
subprogramState.incrementalSubprogram = undefined;
for (var i = 0; i < numberOfSections; ++i) {
var section = getSection(i);
if (section.getId() != sectionId) {
defineWorkPlane(section, false);
// check for valid pattern
if (subprogramType == SUB_PATTERN) {
if (section.getPatternId() == subprogramId) {
var patternPosition = new Array();
patternPosition[0] = getFramePosition(section.getInitialPosition());
patternPosition[1] = getFramePosition(section.getFinalPosition());
tempBox = section.getBoundingBox();
var patternBox = new Array();
patternBox[0] = getFramePosition(tempBox[0]);
patternBox[1] = getFramePosition(tempBox[1]);
if (areSpatialBoxesSame(masterPosition, patternPosition) && areSpatialBoxesSame(masterBox, patternBox) && !section.isMultiAxis()) {
subprogramState.incrementalSubprogram = subprogramState.incrementalSubprogram ? subprogramState.incrementalSubprogram : false;
} else if (!areSpatialBoxesTranslated(masterPosition, patternPosition) || !areSpatialBoxesTranslated(masterBox, patternBox) || section.isMultiAxis() || isTCPSupportedByOperation(section)) {
validSubprogram = false;
break;
} else {
subprogramState.incrementalSubprogram = true;
}
}
// check for valid cycle operation
} else if (subprogramType == SUB_CYCLE) {
if ((section.getNumberOfCyclePoints() == subprogramId) && (section.getNumberOfCycles() == 1)) {
var patternInitial = getFramePosition(section.getInitialPosition());
var patternFinal = getFramePosition(section.getFinalPosition());
if (!areSpatialVectorsDifferent(patternInitial, masterPosition[0]) && !areSpatialVectorsDifferent(patternFinal, masterPosition[1])) {
validSubprogram = true;
break;
}
}
}
}
}
setRotation(rotation);
setTranslation(translation);
return (validSubprogram);
}
/**
* Sets xyz and abc output formats to incremental or absolute type
* @param {boolean} incremental true: Sets incremental mode, false: Sets absolute mode
* @param {Vector} xyz Linear axis values for formating
* @param {Vector} abc Rotary axis values for formating
*/
function setAbsIncMode(incremental, xyz, abc) {
var outputFormats = [xOutput, yOutput, zOutput, aOutput, bOutput, cOutput];
for (var i = 0; i < outputFormats.length; ++i) {
outputFormats[i].setType(incremental ? TYPE_INCREMENTAL : TYPE_ABSOLUTE);
if (typeof incPrefix != "undefined" && typeof absPrefix != "undefined") {
outputFormats[i].setPrefix(incremental ? incPrefix[i] : absPrefix[i]);
}
if (i <= 2) { // xyz
outputFormats[i].setCurrent(xyz.getCoordinate(i));
} else { // abc
outputFormats[i].setCurrent(abc.getCoordinate(i - 3));
}
}
subprogramState.incrementalMode = incremental;
if (typeof gAbsIncModal != "undefined") {
if (incremental) {
forceModals(gAbsIncModal);
}
writeBlock(gAbsIncModal.format(incremental ? 91 : 90));
}
}
function setCyclePosition(_position) {
var _spindleAxis;
if (typeof gPlaneModal != "undefined") {
_spindleAxis = gPlaneModal.getCurrent() == 17 ? Z : (gPlaneModal.getCurrent() == 18 ? Y : X);
} else {
var _spindleDirection = machineConfiguration.getSpindleAxis().getAbsolute();
_spindleAxis = isSameDirection(_spindleDirection, new Vector(0, 0, 1)) ? Z : isSameDirection(_spindleDirection, new Vector(0, 1, 0)) ? Y : X;
}
switch (_spindleAxis) {
case Z:
zOutput.format(_position);
break;
case Y:
yOutput.format(_position);
break;
case X:
xOutput.format(_position);
break;
}
}
/**
* Place cycle operation in subprogram
* @param {Vector} initialPosition Initial position
* @param {Vector} abc Machine axis angles
* @param {boolean} incremental If the subprogram needs to go incremental mode
*/
function handleCycleSubprogram(initialPosition, abc, incremental) {
subprogramState.cycleSubprogramIsActive &= !(cycleExpanded || isProbeOperation());
if (subprogramState.cycleSubprogramIsActive) {
// call subprogram
subprogramCall();
subprogramStart(initialPosition, abc, incremental);
}
}
function writeSubprograms() {
if (subprogramState.subprograms.length > 0) {
writeln("");
write(subprogramState.subprograms);
}
}
// <<<<< INCLUDED FROM include_files/subprograms.cpi
// >>>>> INCLUDED FROM include_files/onRapid_fanuc.cpi
function onRapid(_x, _y, _z) {
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
if (x || y || z) {
if (pendingRadiusCompensation >= 0) {
error(localize("Radius compensation mode cannot be changed at rapid traversal."));
return;
}
writeBlock(gMotionModal.format(0), x, y, z);
forceFeed();
}
}
// <<<<< INCLUDED FROM include_files/onRapid_fanuc.cpi
// >>>>> INCLUDED FROM include_files/onLinear_siemens.cpi
function onLinear(_x, _y, _z, feed) {
if (pendingRadiusCompensation >= 0) {
xOutput.reset();
yOutput.reset();
}
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
var f = getFeed(feed);
if (x || y || z) {
if (pendingRadiusCompensation >= 0) {
pendingRadiusCompensation = -1;
if (getProperty("useTOFFR")) {
if (getParameter("operation:compensationType") == "wear") {
writeBlock("TOFFR = -" + tool.diameter / 2);
} else if (getParameter("operation:compensationType") == "inverseWear") {
writeBlock("TOFFR = " + tool.diameter / 2);
}
}
writeBlock(gPlaneModal.format(17));
switch (radiusCompensation) {
case RADIUS_COMPENSATION_LEFT:
writeBlock(gMotionModal.format(1), gFormat.format(41), x, y, z, f);
break;
case RADIUS_COMPENSATION_RIGHT:
writeBlock(gMotionModal.format(1), gFormat.format(42), x, y, z, f);
break;
default:
writeBlock(gMotionModal.format(1), gFormat.format(40), x, y, z, f);
}
} else {
writeBlock(gMotionModal.format(1), x, y, z, f);
}
} else if (f) {
if (getNextRecord().isMotion()) { // try not to output feed without motion
forceFeed(); // force feed on next line
} else {
writeBlock(gMotionModal.format(1), f);
}
}
}
// <<<<< INCLUDED FROM include_files/onLinear_siemens.cpi
// >>>>> INCLUDED FROM include_files/onRapid5D_fanuc.cpi
function onRapid5D(_x, _y, _z, _a, _b, _c) {
if (pendingRadiusCompensation >= 0) {
error(localize("Radius compensation mode cannot be changed at rapid traversal."));
return;
}
if (!currentSection.isOptimizedForMachine()) {
forceXYZ();
}
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
var a = currentSection.isOptimizedForMachine() ? aOutput.format(_a) : toolVectorOutputI.format(_a);
var b = currentSection.isOptimizedForMachine() ? bOutput.format(_b) : toolVectorOutputJ.format(_b);
var c = currentSection.isOptimizedForMachine() ? cOutput.format(_c) : toolVectorOutputK.format(_c);
if (x || y || z || a || b || c) {
writeBlock(gMotionModal.format(0), x, y, z, a, b, c);
forceFeed();
}
}
// <<<<< INCLUDED FROM include_files/onRapid5D_fanuc.cpi
// >>>>> INCLUDED FROM include_files/onCircular_siemens.cpi
function onCircular(clockwise, cx, cy, cz, x, y, z, feed) {
if (pendingRadiusCompensation >= 0) {
error(localize("Radius compensation cannot be activated/deactivated for a circular move."));
return;
}
if (getProperty("useSmoothing", -1) != -1) {
linearize(tolerance);
return;
}
writeBlock(gPlaneModal.format(17));
var start = getCurrentPosition();
var revolutions = xyzFormat.getResultingValue(Math.abs(getCircularSweep()) / (2 * Math.PI));
var turns = useArcTurn ? (revolutions % 1) == 0 ? revolutions - 1 : Math.floor(revolutions) : 0; // full turns
if (isFullCircle()) {
if (isHelical()) {
linearize(tolerance);
return;
}
if (turns > 1) {
error(localize("Multiple turns are not supported."));
return;
}
// G90/G91 are dont care when we do not used XYZ
switch (getCircularPlane()) {
case PLANE_XY:
writeBlock(gMotionModal.format(clockwise ? 2 : 3), iOutput.format(cx - start.x), jOutput.format(cy - start.y), getFeed(feed));
break;
case PLANE_ZX:
writeBlock(gMotionModal.format(clockwise ? 2 : 3), iOutput.format(cx - start.x), kOutput.format(cz - start.z), getFeed(feed));
break;
case PLANE_YZ:
writeBlock(gMotionModal.format(clockwise ? 2 : 3), jOutput.format(cy - start.y), kOutput.format(cz - start.z), getFeed(feed));
break;
default:
linearize(tolerance);
}
} else if (useArcTurn && !getProperty("useRadius")) { // IJK mode
switch (getCircularPlane()) {
case PLANE_XY:
if (isHelical()) {
xOutput.reset();
yOutput.reset();
}
writeBlock(gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), iOutput.format(cx - start.x), jOutput.format(cy - start.y), getFeed(feed), turns > 0 ? "TURN=" + turns : "");
break;
case PLANE_ZX:
if (isHelical()) {
xOutput.reset();
zOutput.reset();
}
writeBlock(gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), iOutput.format(cx - start.x), kOutput.format(cz - start.z), getFeed(feed), turns > 0 ? "TURN=" + turns : "");
break;
case PLANE_YZ:
if (isHelical()) {
yOutput.reset();
zOutput.reset();
}
writeBlock(gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), jOutput.format(cy - start.y), kOutput.format(cz - start.z), getFeed(feed), turns > 0 ? "TURN=" + turns : "");
break;
default:
if (turns > 1) {
error(localize("Multiple turns are not supported."));
return;
}
if (getProperty("useCIP")) { // allow CIP
var ip = getPositionU(0.5);
writeBlock(
"CIP",
xOutput.format(x),
yOutput.format(y),
zOutput.format(z),
"I1=" + xyzFormat.format(ip.x),
"J1=" + xyzFormat.format(ip.y),
"K1=" + xyzFormat.format(ip.z),
getFeed(feed)
);
forceModals(gMotionModal, gPlaneModal);
} else {
linearize(tolerance);
}
}
} else { // use radius mode
if (isHelical()) {
linearize(tolerance);
return;
}
var r = getCircularRadius();
if (toDeg(getCircularSweep()) > (180 + 1e-9)) {
r = -r; // allow up to <360 deg arcs
}
forceXYZ();
// radius mode is only supported on PLANE_XY
switch (getCircularPlane()) {
case PLANE_XY:
writeBlock(gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), "CR=" + xyzFormat.format(r), getFeed(feed));
break;
case PLANE_ZX:
writeBlock(gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), zOutput.format(z), iOutput.format(cx - start.x), kOutput.format(cz - start.z), getFeed(feed));
break;
case PLANE_YZ:
writeBlock(gMotionModal.format(clockwise ? 2 : 3), yOutput.format(y), zOutput.format(z), jOutput.format(cy - start.y), kOutput.format(cz - start.z), getFeed(feed));
break;
default:
linearize(tolerance);
}
}
}
// <<<<< INCLUDED FROM include_files/onCircular_siemens.cpi
// >>>>> INCLUDED FROM include_files/rotaryRadii.cpi
var rotaryRadiiTol = toPreciseUnit(2, MM);
var previousRotaryRadii = new Vector(0, 0, 0);
function setRotaryRadii(startTool, endTool, startABC, endABC) {
var radii = getRotaryRadii(startTool, endTool, startABC, endABC);
var axis = new Array(machineConfiguration.getAxisU(), machineConfiguration.getAxisV(), machineConfiguration.getAxisW());
for (var i = 0; i < 3; ++i) {
if (axis[i].isEnabled()) {
var ix = axis[i].getCoordinate();
if (Math.abs(radii.getCoordinate(ix) - previousRotaryRadii.getCoordinate(ix)) > rotaryRadiiTol) {
writeBlock("FGREF[" + axisDesignators[ix] + "] = " + xyzFormat.format(radii.getCoordinate(ix)));
previousRotaryRadii.setCoordinate(ix, radii.getCoordinate(ix));
}
}
}
}
/** Calculate radius for each rotary axis. */
function getRotaryRadii(startTool, endTool, startABC, endABC) {
var radii = new Vector(0, 0, 0);
var axis = new Array(machineConfiguration.getAxisU(), machineConfiguration.getAxisV(), machineConfiguration.getAxisW());
for (var i = 0; i < 3; ++i) {
if (axis[i].isEnabled()) {
var startRadius = getRotaryRadius(axis[i], startTool, startABC);
var endRadius = getRotaryRadius(axis[i], endTool, endABC);
radii.setCoordinate(axis[i].getCoordinate(), Math.max(startRadius, endRadius));
}
}
return radii;
}
/** Calculate the distance of the tool position to the center of a rotary axis. */
function getRotaryRadius(axis, toolPosition, abc) {
if (!axis.isEnabled()) {
return 0;
}
var direction = axis.getEffectiveAxis();
var normal = direction.getNormalized();
// calculate the rotary center based on head/table
var center;
var radius;
if (axis.isHead()) {
var pivot;
if (typeof headOffset === "number") {
pivot = headOffset;
} else {
pivot = getBodyLength(currentSection.getTool());
}
if (axis.getCoordinate() == machineConfiguration.getAxisU().getCoordinate()) { // rider
center = Vector.sum(toolPosition, Vector.product(machineConfiguration.getDirection(abc), pivot));
center = Vector.sum(center, axis.getOffset());
radius = Vector.diff(toolPosition, center).length;
} else { // carrier
var angle = abc.getCoordinate(machineConfiguration.getAxisU().getCoordinate());
radius = Math.abs(pivot * Math.sin(angle));
radius += axis.getOffset().length;
}
} else {
center = axis.getOffset();
var d1 = toolPosition.x - center.x;
var d2 = toolPosition.y - center.y;
var d3 = toolPosition.z - center.z;
var radius = Math.sqrt(
Math.pow((d1 * normal.y) - (d2 * normal.x), 2.0) +
Math.pow((d2 * normal.z) - (d3 * normal.y), 2.0) +
Math.pow((d3 * normal.x) - (d1 * normal.z), 2.0)
);
}
return radius;
}
// <<<<< INCLUDED FROM include_files/rotaryRadii.cpi
// >>>>> INCLUDED FROM include_files/writeRetract_siemens.cpi
function writeRetract() {
var retract = getRetractParameters.apply(this, arguments);
if (retract && retract.words.length > 0) {
for (var i in retract.words) {
var words = retract.singleLine ? retract.words : retract.words[i];
switch (retract.method) {
case "G28":
forceModals(gMotionModal, gAbsIncModal);
writeBlock(gFormat.format(28), gAbsIncModal.format(91), words);
writeBlock(gAbsIncModal.format(90));
break;
case "G30":
forceModals(gMotionModal, gAbsIncModal);
writeBlock(gFormat.format(30), gAbsIncModal.format(91), words);
writeBlock(gAbsIncModal.format(90));
break;
case "G53":
forceModals(gMotionModal);
writeBlock(gAbsIncModal.format(90), gFormat.format(53), gMotionModal.format(0), words, dOutput.format(0));
writeBlock(dOutput.format(toolLengthOffset));
break;
case "SUPA":
case "SUPAVariables":
if (retract.method == "SUPAVariables") {
words = []; // clear words array and add axes variables
words.push(retract.retractAxes[0] ? "X = _XHOME" : "");
words.push(retract.retractAxes[1] ? "Y = _YHOME" : "");
words.push(retract.retractAxes[2] ? "Z = _ZHOME" : "");
}
gMotionModal.reset();
writeBlock(gMotionModal.format(0), "SUPA", words, dOutput.format(0)); // retract
writeBlock(dOutput.format(toolLengthOffset));
break;
default:
if (typeof writeRetractCustom == "function") {
writeRetractCustom(retract);
return;
} else {
error(subst(localize("Unsupported safe position method '%1'"), retract.method));
}
}
machineSimulation({
x : retract.singleLine || words.indexOf("X") != -1 ? retract.positions.x : undefined,
y : retract.singleLine || words.indexOf("Y") != -1 ? retract.positions.y : undefined,
z : retract.singleLine || words.indexOf("Z") != -1 ? retract.positions.z : undefined,
coordinates: MACHINE
});
if (retract.singleLine) {
break;
}
}
}
}
// <<<<< INCLUDED FROM include_files/writeRetract_siemens.cpi
// >>>>> INCLUDED FROM include_files/drillCycles_siemens.cpi
function writeDrillCycle(cycle, x, y, z) {
if (!isSameDirection(machineConfiguration.getSpindleAxis(), getForwardDirection(currentSection))) {
expandCyclePoint(x, y, z);
return;
}
writeBlock(gFeedModeModal.format(94));
if (isFirstCyclePoint()) {
if (!isTappingCycle()) {
writeBlock(feedOutput.format(cycle.feedrate));
}
var RTP;
var RFP;
var SDIS;
var DP;
var DPR;
var DTB;
var SDIR;
if (tool.type != TOOL_PROBE) {
RTP = xyzFormat.format(cycle.clearance); // return plane (absolute)
RFP = xyzFormat.format(cycle.stock); // reference plane (absolute)
SDIS = xyzFormat.format(cycle.retract - cycle.stock); // safety distance
DP = xyzFormat.format(cycle.bottom); // depth (absolute)
DPR = ""; // depth (relative to reference plane)
DTB = secFormat.format(cycle.dwell);
SDIR = integerFormat.format(tool.clockwise ? 3 : 4); // direction of rotation: M3:3 and M4:4
}
if (cycleType == "chip-breaking" && (cycle.accumulatedDepth < cycle.depth)) {
expandCyclePoint(x, y, z);
return;
}
if (xyzFormat.getResultingValue(cycle.clearance) > xyzFormat.getResultingValue(getCurrentPosition().z)) {
writeBlock(gMotionModal.format(0), zOutput.format(cycle.clearance));
}
switch (cycleType) {
case "drilling":
var _GMODE = integerFormat.format(0);
var _DMODE = integerFormat.format(0); // keep the programmed plane active
var _AMODE = integerFormat.format(10); // dwell is programmed in seconds and depth is taken from DP DPR settings
writeBlock(
"MCALL CYCLE81(" + [RTP, RFP, SDIS, DP, DPR +
(getProperty("useExtendedCycles") ? (cycleSeparator + [_GMODE, _DMODE, _AMODE].join(cycleSeparator)) : "")].join(cycleSeparator) + ")"
);
break;
case "counter-boring":
var _GMODE = integerFormat.format(0);
var _DMODE = integerFormat.format(0); // keep the programmed plane active
var _AMODE = integerFormat.format(10); // dwell is programmed in seconds and depth is taken from DP DPR settings
writeBlock(
"MCALL CYCLE82(" + [RTP, RFP, SDIS, DP, DPR, DTB +
(getProperty("useExtendedCycles") ? (cycleSeparator + [_GMODE, _DMODE, _AMODE].join(", ")) : "")].join(cycleSeparator) + ")"
);
break;
case "chip-breaking":
// add support for accumulated depth
var FDEP = xyzFormat.format(cycle.stock - cycle.incrementalDepth);
var FDPR = ""; // relative to reference plane (unsigned)
var _DAM = xyzFormat.format(cycle.incrementalDepthReduction); // degression (unsigned)
DTB = "";
var DTS = secFormat.format(0); // dwell time at start
var FRF = xyzFormat.format(1); // feedrate factor (unsigned)
var VARI = integerFormat.format(0); // chip breaking
var _AXN = ""; // tool axis
var _MDEP = xyzFormat.format((cycle.incrementalDepthReduction > 0) ? cycle.minimumIncrementalDepth : cycle.incrementalDepth); // minimum drilling depth
var _VRT = xyzFormat.format(cycle.chipBreakDistance); // retraction distance
var _DTD = secFormat.format((cycle.dwell != undefined) ? cycle.dwell : 0);
var _DIS1 = integerFormat.format(0); // limit distance
var _GMODE = integerFormat.format(0); // drilling with respect to the tip
var _DMODE = integerFormat.format(0); // keep the programmed plane active
var _AMODE = integerFormat.format(1001110);
writeBlock(
"MCALL CYCLE83(" + [RTP, RFP, SDIS, DP, DPR, FDEP, FDPR, _DAM, DTB, DTS, FRF, VARI, _AXN, _MDEP, _VRT, _DTD, _DIS1 +
(getProperty("useExtendedCycles") ? (cycleSeparator + [_GMODE, _DMODE, _AMODE].join(cycleSeparator)) : "")].join(cycleSeparator) + ")"
);
break;
case "deep-drilling":
var FDEP = xyzFormat.format(cycle.stock - cycle.incrementalDepth);
var FDPR = ""; // relative to reference plane (unsigned)
var _DAM = xyzFormat.format(cycle.incrementalDepthReduction); // degression (unsigned)
var DTS = secFormat.format(0); // dwell time at start
var FRF = xyzFormat.format(1); // feedrate factor (unsigned)
var VARI = integerFormat.format(1); // full retract
var _AXN = ""; // tool axis
var _MDEP = xyzFormat.format((cycle.incrementalDepthReduction > 0) ? cycle.minimumIncrementalDepth : cycle.incrementalDepth); // minimum drilling depth
var _VRT = xyzFormat.format(cycle.chipBreakDistance ? cycle.chipBreakDistance : 0); // retraction distance
var _DTD = secFormat.format((cycle.dwell != undefined) ? cycle.dwell : 0);
var _DIS1 = integerFormat.format(0); // limit distance
var _GMODE = integerFormat.format(0); // drilling with respect to the tip
var _DMODE = integerFormat.format(0); // keep the programmed plane active
var _AMODE = integerFormat.format(1001110);
writeBlock(
"MCALL CYCLE83(" + [RTP, RFP, SDIS, DP, DPR, FDEP, FDPR, _DAM, DTB, DTS, FRF, VARI, _AXN, _MDEP, _VRT, _DTD, _DIS1 +
(getProperty("useExtendedCycles") ? (cycleSeparator + [_GMODE, _DMODE, _AMODE].join(cycleSeparator)) : "")].join(cycleSeparator) + ")"
);
break;
case "tapping":
case "left-tapping":
case "right-tapping":
var SDAC = SDIR; // direction of rotation after end of cycle
var MPIT = ""; // thread pitch as thread size
var PIT = xyzFormat.format(tool.threadPitch); // thread pitch
var POSS = xyzFormat.format(0); // spindle position for oriented spindle stop in cycle (in degrees)
var SST = rpmFormat.format(spindleSpeed); // speed for tapping
var SST1 = rpmFormat.format(spindleSpeed); // speed for return
var _AXN = integerFormat.format(0); // tool axis
var _PITA = integerFormat.format((unit == MM) ? 1 : 3);
var _TECHNO = ""; // technology settings
var _VARI = integerFormat.format(0); // machining type: 0 = tapping full depth, 1 = tapping partial retract, 2 = tapping full retract
var _DAM = ""; // incremental depth
var _VRT = ""; // retract distance for chip breaking
var _PITM = ""; // string for pitch input (not used)
var _PTAB = ""; // string for thread table (not used)
var _PTABA = ""; // string for selection from thread table (not used)
var _GMODE = integerFormat.format(0); // reserved (geometrical mode)
var _DMODE = integerFormat.format(0); // units and active spindle (0 for tool spindle, 100 for turning spindle)
var _AMODE = integerFormat.format((tool.type == TOOL_TAP_LEFT_HAND) ? 1002002 : 1001002); // alternate mode
writeBlock(
"MCALL CYCLE84(" + [RTP, RFP, SDIS, DP, DPR, DTB, SDAC, MPIT, PIT, POSS, SST, SST1, _AXN, _PITA, _TECHNO, _VARI, _DAM, _VRT, _PITM, _PTAB, _PTABA +
(getProperty("useExtendedCycles") ? (cycleSeparator + [_GMODE, _DMODE, _AMODE].join(cycleSeparator)) : "")].join(cycleSeparator) + ")"
);
break;
case "tapping-with-chip-breaking":
if (cycle.accumulatedDepth < cycle.depth) {
error(localize("Accumulated pecking depth is not supported for canned tapping cycles with chip breaking."));
return;
}
var SDAC = SDIR; // direction of rotation after end of cycle
var MPIT = ""; // thread pitch as thread size
var PIT = xyzFormat.format(tool.threadPitch); // thread pitch
var POSS = xyzFormat.format(0); // spindle position for oriented spindle stop in cycle (in degrees)
var SST = rpmFormat.format(spindleSpeed); // speed for tapping
var SST1 = rpmFormat.format(spindleSpeed); // speed for return
var _AXN = integerFormat.format(0); // tool axis
var _PITA = integerFormat.format((unit == MM) ? 1 : 3);
var _TECHNO = ""; // technology settings
var _VARI = integerFormat.format(1); // machining type: 0 = tapping full depth, 1 = tapping partial retract, 2 = tapping full retract
var _DAM = xyzFormat.format(cycle.incrementalDepth); // incremental depth
var _VRT = xyzFormat.format(cycle.chipBreakDistance); // retract distance for chip breaking
var _PITM = ""; // string for pitch input (not used)
var _PTAB = ""; // string for thread table (not used)
var _PTABA = ""; // string for selection from thread table (not used)
var _GMODE = integerFormat.format(0); // reserved (geometrical mode)
var _DMODE = integerFormat.format(0); // units and active spindle (0 for tool spindle, 100 for turning spindle)
var _AMODE = integerFormat.format((tool.type == TOOL_TAP_LEFT_HAND) ? 1002002 : 1001002); // alternate mode
writeBlock(
"MCALL CYCLE84(" + [RTP, RFP, SDIS, DP, DPR, DTB, SDAC, MPIT, PIT, POSS, SST, SST1, _AXN, _PITA, _TECHNO, _VARI, _DAM, _VRT, _PITM, _PTAB, _PTABA +
(getProperty("useExtendedCycles") ? (cycleSeparator + [_GMODE, _DMODE, _AMODE].join(cycleSeparator)) : "")].join(cycleSeparator) + ")"
);
break;
case "reaming":
var FFR = feedFormat.format(cycle.feedrate);
var RFF = feedFormat.format(cycle.retractFeedrate);
var _GMODE = integerFormat.format(0); // reserved
var _DMODE = integerFormat.format(0); // keep current plane active
var _AMODE = integerFormat.format(0); // compatibility from DP and DT programming
writeBlock(
"MCALL CYCLE85(" + [RTP, RFP, SDIS, DP, DPR, DTB, FFR, RFF +
(getProperty("useExtendedCycles") ? (cycleSeparator + [_GMODE, _DMODE, _AMODE].join(cycleSeparator)) : "")].join(cycleSeparator) + ")"
);
break;
case "stop-boring":
if (cycle.dwell > 0) {
writeBlock(
"MCALL CYCLE88(" + [RTP, RFP, SDIS, DP, DPR, DTB, SDIR].join(cycleSeparator) + ")"
);
} else {
writeBlock(
"MCALL CYCLE87(" + [RTP, RFP, SDIS, DP, DPR, SDIR].join(cycleSeparator) + ")"
);
}
break;
case "fine-boring":
var RPA = xyzFormat.format(-Math.cos(cycle.shiftOrientation) * cycle.shift); // return path in abscissa of the active plane (enter incrementally with)
var RPO = xyzFormat.format(-Math.sin(cycle.shiftOrientation) * cycle.shift); // return path in the ordinate of the active plane (enter incrementally sign)
var RPAP = xyzFormat.format(0); // return plane in the applicate (enter incrementally with sign)
var POSS = xyzFormat.format(toDeg(cycle.shiftOrientation)); // spindle position for oriented spindle stop in cycle (in degrees)
var _GMODE = integerFormat.format(0); // lift off
var _DMODE = integerFormat.format(0); // keep current plane active
var _AMODE = integerFormat.format(10); // dwell in seconds and keep units abs/inc setting from DP/DPR
writeBlock(
"MCALL CYCLE86(" + [RTP, RFP, SDIS, DP, DPR, DTB, SDIR, RPA, RPO, RPAP, POSS +
(getProperty("useExtendedCycles") ? (cycleSeparator + [_GMODE, _DMODE, _AMODE].join(cycleSeparator)) : "")].join(cycleSeparator) + ")"
);
break;
case "boring":
// retract feed is ignored
writeBlock(
"MCALL CYCLE89(" + [RTP, RFP, SDIS, DP, DPR, DTB].join(cycleSeparator) + ")"
);
break;
default:
expandCyclePoint(x, y, z);
}
if (!cycleExpanded) {
if (subprogramsAreSupported()) { // place cycle operation in subprogram
handleCycleSubprogram(new Vector(x, y, z), new Vector(0, 0, 0), false);
if (subprogramState.incrementalMode) { // set current position to clearance height
setCyclePosition(cycle.clearance);
}
}
forceXYZ();
if ((currentSection.getPolarMode && currentSection.getPolarMode() != POLAR_MODE_OFF) && currentSection.isMultiAxis()) {
var polarPosition = getPolarPosition(x, y, z);
setCurrentPositionAndDirection(polarPosition);
writeBlock(xOutput.format(polarPosition.first.x), yOutput.format(polarPosition.first.y), aOutput.format(polarPosition.second.x),
bOutput.format(polarPosition.second.y), cOutput.format(polarPosition.second.z));
} else {
writeBlock(xOutput.format(x), yOutput.format(y));
}
}
} else {
if (!cycleExpanded) {
if (subprogramsAreSupported() && subprogramState.incrementalMode) { // set current position to clearance height
setCyclePosition(cycle.clearance);
}
if ((currentSection.getPolarMode && currentSection.getPolarMode() != POLAR_MODE_OFF) && currentSection.isMultiAxis()) {
var polarPosition = getPolarPosition(x, y, z);
setCurrentPositionAndDirection(polarPosition);
writeBlock(xOutput.format(polarPosition.first.x), yOutput.format(polarPosition.first.y),
aOutput.format(polarPosition.second.x), bOutput.format(polarPosition.second.y), cOutput.format(polarPosition.second.z));
} else {
writeBlock(xOutput.format(x), yOutput.format(y));
}
if (subprogramsAreSupported() && subprogramState.incrementalMode) { // set current position to clearance height
setCyclePosition(cycle.clearance);
}
} else {
expandCyclePoint(x, y, z);
}
}
}
// <<<<< INCLUDED FROM include_files/drillCycles_siemens.cpi
// >>>>> INCLUDED FROM include_files/rewind.cpi
function onMoveToSafeRetractPosition() {
if (!getSetting("allowCancelTCPBeforeRetracting", false)) {
writeRetract(Z);
}
if (state.tcpIsActive) { // cancel TCP so that tool doesn't follow rotaries
if (typeof setTCP == "function") {
setTCP(false);
} else {
disableLengthCompensation(false);
}
}
writeRetract(Z);
if (getSetting("retract.homeXY.onIndexing", false)) {
writeRetract(settings.retract.homeXY.onIndexing);
}
}
/** Rotate axes to new position above reentry position */
function onRotateAxes(_x, _y, _z, _a, _b, _c) {
// position rotary axes
xOutput.disable();
yOutput.disable();
zOutput.disable();
if (typeof unwindABC == "function") {
unwindABC(new Vector(_a, _b, _c), false);
}
onRapid5D(_x, _y, _z, _a, _b, _c);
setCurrentABC(new Vector(_a, _b, _c));
machineSimulation({a:_a, b:_b, c:_c, coordinates:MACHINE});
xOutput.enable();
yOutput.enable();
zOutput.enable();
forceXYZ();
}
/** Return from safe position after indexing rotaries. */
function onReturnFromSafeRetractPosition(_x, _y, _z) {
if (!machineConfiguration.isHeadConfiguration()) {
writeInitialPositioning(new Vector(_x, _y, _z), true);
if (highFeedMapping != HIGH_FEED_NO_MAPPING) {
onLinear5D(_x, _y, _z, getCurrentDirection().x, getCurrentDirection().y, getCurrentDirection().z, highFeedrate);
} else {
onRapid5D(_x, _y, _z, getCurrentDirection().x, getCurrentDirection().y, getCurrentDirection().z);
}
machineSimulation({x:_x, y:_y, z:_z, a:getCurrentDirection().x, b:getCurrentDirection().y, c:getCurrentDirection().z});
} else {
if (tcp.isSupportedByOperation) {
if (typeof setTCP == "function") {
setTCP(true);
} else {
writeBlock(getOffsetCode(), hFormat.format(tool.lengthOffset));
}
}
forceXYZ();
xOutput.reset();
yOutput.reset();
zOutput.disable();
if (highFeedMapping != HIGH_FEED_NO_MAPPING) {
onLinear(_x, _y, _z, highFeedrate);
} else {
onRapid(_x, _y, _z);
}
machineSimulation({x:_x, y:_y});
zOutput.enable();
invokeOnRapid(_x, _y, _z);
}
}
// <<<<< INCLUDED FROM include_files/rewind.cpi
// >>>>> INCLUDED FROM include_files/probeCycles_siemens.cpi
function writeProbeCycle(cycle, x, y, z, P, F) {
if (isProbeOperation()) {
var _x = xOutput.format(x);
var _y = yOutput.format(y);
var _z = zOutput.format(z);
if (!settings.workPlaneMethod.useTiltedWorkplane && !isSameDirection(currentSection.workPlane.forward, new Vector(0, 0, 1))) {
if (!settings.probing.allowIndexingWCSProbing && currentSection.strategy == "probe") {
error(localize("Updating WCS / work offset using probing is only supported by the CNC in the WCS frame."));
return;
}
}
var isMirrored = currentSection.getInternalPatternId && currentSection.getInternalPatternId() != currentSection.getPatternId();
validate(!isMirrored, "Mirror pattern is not supported for Probing toolpaths.");
if (currentSection.isPatterned && currentSection.isPatterned()) {
// probe cycles that cannot be used with patterns
var unsupportedCycleTypes = ["probing-x", "probing-y", "probing-xy-inner-corner", "probing-xy-outer-corner", "probing-x-plane-angle", "probing-y-plane-angle"];
if (unsupportedCycleTypes.indexOf(cycleType) > -1 && (!Matrix.diff(new Matrix(), currentSection.workPlane).isZero())) {
error(subst("Rotary type patterns are not supported for the Probing cycle type '%1'.", cycleType));
}
}
if (_z && (z >= getCurrentPosition().z)) {
writeBlock(gMotionModal.format(1), _z, feedOutput.format(cycle.feedrate));
}
if (_x || _y) {
writeBlock(gMotionModal.format(1), _x, _y, feedOutput.format(cycle.feedrate));
}
if (_z && (z < getCurrentPosition().z)) {
writeBlock(gMotionModal.format(1), _z, feedOutput.format(cycle.feedrate));
}
currentWorkOffset = undefined;
var singleLine = getProperty("singleLineProbing");
var probingArguments = getProbingArguments(cycle, singleLine);
var _PRNUM = (!singleLine ? "_PRNUM=" : "") + toolProbeFormat.format(1); // Probingtyp, Probingnumber. 3 digits. 1st = (0=Multiprobe, 1=Monoprobe), 2nd/3rd = 2digit Probing-Tool-Number
var _VMS = (!singleLine ? "_VMS=" : "") + xyzFormat.format(0); // Feed of probing. 0=150mm/min, >1=300m/min
var _TSA = (!singleLine ? "_TSA=" : "") + (cycleType.indexOf("angle") != -1 ? xyzFormat.format(0.1) : xyzFormat.format(1)); // tolerance (trust area) //angle tolerance (in the simulation he move to the second point with this angle)
var _NMSP = (!singleLine ? "_NMSP=" : "") + xyzFormat.format(1); // number of measurements at same spot
var _ID = probingArguments.isIncrementalDepth ? (!singleLine ? "_ID=" : "") + xyzFormat.format(cycle.depth * -1) : undefined; // incremental depth infeed in Z, direction over sign (only by circular boss, wall resp. rectangle and by hole/channel/circular boss/wall with guard zone)
var _SETVAL = (!probingArguments.isRectangularFeature ? (!singleLine ? "_SETVAL=" : "") : undefined);
_SETVAL = (cycle.width1 && !probingArguments.isRectangularFeature ? _SETVAL + xyzFormat.format(cycle.width1) : _SETVAL);
var _SETV0 = (probingArguments.isRectangularFeature ? (!singleLine ? "_SETV[0]=" : "") + (cycle.width1 ? xyzFormat.format(cycle.width1) : (singleLine ? xyzFormat.format(0) : "")) : undefined); // nominal value in X
var _SETV1 = (probingArguments.isRectangularFeature ? (!singleLine ? "_SETV[1]=" : "") + (cycle.width2 ? xyzFormat.format(cycle.width2) : "") : undefined); // nominal value in Y
var _DMODE = 0;
var _FA = (!singleLine ? "_FA=" : "") + // measuring range (distance to surface), total measuring range=2*_FA in mm
xyzFormat.format(cycle.probeClearance ? cycle.probeClearance : cycle.probeOvertravel);
var _RA = (probingArguments.isAngleProbing ? (!singleLine ? "_RA=" : "") + xyzFormat.format(0) : undefined); // correction of angle, 0 dont rotate the table;
var _STA1 = (probingArguments.isAngleProbing ? (!singleLine ? "_STA1=" : "") + xyzFormat.format(0) : undefined); // angle of the plane
var _TDIF = probingArguments._TDIF;
var _TNUM = probingArguments._TNUM;
var _TMV = probingArguments._TMV;
var _TUL = probingArguments._TUL;
var _TLL = probingArguments._TLL;
var _K = (!singleLine ? "_K=" : "");
var _KNUM = probingArguments._KNUM;
if (_KNUM == undefined) {
_KNUM = (!singleLine ? "_KNUM=" + xyzFormat.format(currentSection.probeWorkOffset) : xyzFormat.format(10000 + currentSection.probeWorkOffset)); // automatically input in active workOffset. e.g. _KNUM=1 (G54)
}
if (!getProperty("toolAsName") && tool.number >= 100) {
error(localize("Tool number is out of range for probing. Tool number must be below 100."));
return;
}
if (cycle.updateToolWear) {
if (getProperty("toolAsName") && !cycle.toolDescription) {
if (hasParameter("operation-comment")) {
error(subst(localize("Tool description is empty in operation \"%1\"."), getParameter("operation-comment").toUpperCase()));
} else {
error(localize("Tool description is empty."));
}
return;
}
if (!probingArguments.isAngleProbing) {
var array = [100, 51, 34, 26, 21, 17, 15, 13, 12, 9, 0];
var factor = cycle.toolWearErrorCorrection;
for (var i = 1; i < array.length; ++i) {
var range = new Range(array[i - 1], array[i]);
if (range.isWithin(factor)) {
_K += (factor <= range.getMaximum()) ? i : i + 1;
break;
}
}
} else {
_K = undefined;
}
} else {
_K = undefined;
}
writeBlock(
conditional(probingArguments.isWrongSizeAction, "_CBIT[2]=1 "),
conditional(cycle.updateToolWear, "_CHBIT[3]=1 "), //0 tool data are written in geometry, wear is deleted; 1 difference is written in tool wear data geometry remain unchanged
conditional(cycle.printResults, "_CHBIT[10]=1 _CHBIT[11]=1")
);
var cycleParameters;
switch (cycleType) {
case "probing-x":
case "probing-y":
cycleParameters = {cycleNumber:978, _MA:cycleType == "probing-x" ? 1 : 2, _MVAR:0};
_SETVAL += xyzFormat.format((cycleType == "probing-x" ? x : y) + approach(cycle.approach1) * (cycle.probeClearance + tool.diameter / 2));
writeBlock(gMotionModal.format(1), zOutput.format(z - cycle.depth), feedOutput.format(cycle.feedrate));
break;
case "probing-z":
cycleParameters = {cycleNumber:978, _MA:3, _MVAR:0};
_SETVAL += xyzFormat.format(z - cycle.depth);
writeBlock(gMotionModal.format(1), zOutput.format(z - cycle.depth + cycle.probeClearance));
break;
case "probing-x-channel":
cycleParameters = {cycleNumber:977, _MA:1, _MVAR:3};
writeBlock(gMotionModal.format(1) + " " + zOutput.format(z - cycle.depth));
break;
case "probing-x-channel-with-island":
cycleParameters = {cycleNumber:977, _MA:1, _MVAR:3};
break;
case "probing-y-channel":
cycleParameters = {cycleNumber:977, _MA:2, _MVAR:3};
writeBlock(gMotionModal.format(1) + " " + zOutput.format(z - cycle.depth));
break;
case "probing-y-channel-with-island":
cycleParameters = {cycleNumber:977, _MA:2, _MVAR:3};
break;
/* not supported currently, need min. 3 points to call this cycle (same as heindenhain)
case "probing-xy-inner-corner":
cycleParameters = {cycleNumber: 961, _MVAR: 105};
break;
case "probing-xy-outer-corner":
cycleParameters = {cycleNumber: 961, _MVAR: 106};
_ID = (!singleLine ? "_ID=" : "") + xyzFormat.format(0);
break;
*/
case "probing-x-wall":
case "probing-y-wall":
cycleParameters = {cycleNumber:977, _MA:cycleType == "probing-x-wall" ? 1 : 2, _MVAR:4};
break;
case "probing-xy-circular-hole":
cycleParameters = {cycleNumber:977, _MVAR:1};
writeBlock(gMotionModal.format(1) + " " + zOutput.format(cycle.bottom));
break;
case "probing-xy-circular-hole-with-island":
cycleParameters = {cycleNumber:977, _MVAR:1};
// writeBlock(conditional(cycleType == "probing-xy-circular-hole", gMotionModal.format(1) + " " + zOutput.format(z - cycle.depth)));
break;
case "probing-xy-circular-boss":
cycleParameters = {cycleNumber:977, _MVAR:2};
break;
case "probing-xy-rectangular-hole":
cycleParameters = {cycleNumber:977, _MVAR:5};
writeBlock(gMotionModal.format(1) + " " + zOutput.format(z - cycle.depth));
break;
case "probing-xy-rectangular-boss":
cycleParameters = {cycleNumber:977, _MVAR:6};
break;
case "probing-xy-rectangular-hole-with-island":
cycleParameters = {cycleNumber:977, _MVAR:5};
break;
case "probing-x-plane-angle":
case "probing-y-plane-angle":
cycleParameters = {cycleNumber:998, _MA:cycleType == "probing-x-plane-angle" ? 201 : 102, _MVAR:5};
_ID = (!singleLine ? "_ID=" : "") + xyzFormat.format(cycle.probeSpacing); // distance between points
_SETVAL += xyzFormat.format((cycleType == "probing-x-plane-angle" ? x : y) + approach(cycle.approach1) * (cycle.probeClearance + tool.diameter / 2));
writeBlock(gMotionModal.format(1), zOutput.format(z - cycle.depth));
writeBlock(gMotionModal.format(1), cycleType == "probing-x-plane-angle" ? yOutput.format(y - cycle.probeSpacing / 2) : xOutput.format(x - cycle.probeSpacing / 2));
break;
default:
cycleNotSupported();
}
var multiplier = (probingArguments.probeWCS || probingArguments.isAngleProbing) ? 100 : 0; // 1xx for datum shift correction
multiplier = (cycleType.indexOf("island") != -1) ? 1000 + multiplier : multiplier; // 1xxx for guardian zone
var _MVAR = cycleParameters._MVAR != undefined ? (!singleLine ? "_MVAR=" : "") + xyzFormat.format(multiplier + cycleParameters._MVAR) : undefined; // CYCLE TYPE
var _MA = cycleParameters._MA != undefined ? (!singleLine ? "_MA=" : "") + xyzFormat.format(cycleParameters._MA) : undefined;
var procParam = [];
if (!singleLine) {
writeBlock(_TSA, _PRNUM, _VMS, _NMSP, _FA, _TDIF, _TUL, _TLL, _K, _TMV);
writeBlock(_MVAR, _SETV0, _SETV1, _SETVAL, _MA, _ID, _RA, _STA1, _TNUM, _KNUM);
writeBlock("CYCLE" + xyzFormat.format(cycleParameters.cycleNumber));
} else {
switch (cycleParameters.cycleNumber) {
case 977:
procParam = [_MVAR, _KNUM, "", _PRNUM, _SETVAL, _SETV0, _SETV1,
_FA, _TSA, _STA1, _ID, "", "", _MA, _NMSP, _TNUM,
"", "", _TDIF, _TUL, _TLL, _TMV, _K, "", "", _DMODE].join(cycleSeparator);
break;
case 998:
procParam = [_MVAR, _KNUM, _RA, _PRNUM, _SETVAL, _STA1,
"", _FA, _TSA, _MA, "", _ID, _SETV0, _SETV1,
"", "", _NMSP, "", _DMODE].join(cycleSeparator);
break;
case 978:
procParam = [_MVAR, _KNUM, "", _PRNUM, _SETVAL,
_FA, _TSA, _MA, "", _NMSP, _TNUM, "", "", _TDIF,
_TUL, _TLL, _TMV, _K, "", "", _DMODE].join(cycleSeparator);
break;
default:
cycleNotSupported();
}
writeBlock(
("CYCLE" + xyzFormat.format(cycleParameters.cycleNumber)) + "(" + (procParam) + cycleSeparator + ")"
);
}
if (probingArguments.isOutOfPositionAction) {
if (cycleParameters.cycleNumber != 977) {
writeComment("Out of position action is only supported with CYCLE977.");
} else {
var positionUpperTolerance = xyzFormat.format(cycle.tolerancePosition);
var positionLowerTolerance = xyzFormat.format(cycle.tolerancePosition * -1);
writeBlock(
"IF((_OVR[5]>" + positionUpperTolerance + ")" +
" OR (_OVR[6]>" + positionUpperTolerance + ")" +
" OR (_OVR[5]<" + positionLowerTolerance + ")" +
" OR (_OVR[6]<" + positionLowerTolerance + ")" +
")"
);
writeBlock("SETAL(62990,\"OUT OF POSITION TOLERANCE\")");
onCommand(COMMAND_STOP);
writeBlock("ENDIF");
}
}
if (probingArguments.isAngleAskewAction) {
var angleUpperTolerance = xyzFormat.format(cycle.toleranceAngle);
var angleLowerTolerance = xyzFormat.format(cycle.toleranceAngle * -1);
writeBlock(
"IF((_OVR[16]>" + angleUpperTolerance + ")" +
" OR (_OVR[16]<" + angleLowerTolerance + ")" +
")"
);
writeBlock("SETAL(62991,\"OUT OF ANGLE TOLERANCE\")");
onCommand(COMMAND_STOP);
writeBlock("ENDIF");
}
}
}
/** Convert approach to sign. */
function approach(value) {
validate((value == "positive") || (value == "negative"), "Invalid approach.");
return (value == "positive") ? 1 : -1;
}
// <<<<< INCLUDED FROM include_files/probeCycles_siemens.cpi
// >>>>> INCLUDED FROM include_files/getProbingArguments_siemens.cpi
function getProbingArguments(cycle, singleLine) {
var probeWCS = hasParameter("operation-strategy") && (getParameter("operation-strategy") == "probe");
var isAngleProbing = cycleType.indexOf("angle") != -1;
return {
probeWCS : probeWCS,
isAngleProbing : isAngleProbing,
isRectangularFeature : cycleType.indexOf("rectangular") != -1,
isIncrementalDepth : cycleType.indexOf("island") != -1 || cycleType.indexOf("wall") != -1 || cycleType.indexOf("boss") != -1,
isAngleAskewAction : (cycle.angleAskewAction == "stop-message"),
isWrongSizeAction : (cycle.wrongSizeAction == "stop-message"),
isOutOfPositionAction: (cycle.outOfPositionAction == "stop-message"),
_TUL : !isAngleProbing ? (cycle.tolerancePosition ? ((!singleLine ? "_TUL=" : "") + xyzFormat.format(cycle.tolerancePosition)) : undefined) : undefined,
_TLL : !isAngleProbing ? (cycle.tolerancePosition ? ((!singleLine ? "_TLL=" : "") + xyzFormat.format(cycle.tolerancePosition * -1)) : undefined) : undefined,
_TNUM : (!isAngleProbing && cycle.updateToolWear) ? (!singleLine ? (getProperty("toolAsName") ? "_TNAME=" : "_TNUM=") : "") + (getProperty("toolAsName") ? "\"" + (cycle.toolDescription.toUpperCase()) + "\"" : toolFormat.format(cycle.toolWearNumber)) : undefined,
_TDIF : (!isAngleProbing && cycle.updateToolWear) ? (!singleLine ? "_TDIF=" : "") + xyzFormat.format(cycle.toolWearUpdateThreshold) : undefined,
_TMV : cycle.hasSizeTolerance ? ((!isAngleProbing && cycle.updateToolWear) ? (!singleLine ? "_TMV=" : "") + xyzFormat.format(cycle.toleranceSize) : undefined) : undefined,
_KNUM : (!isAngleProbing && cycle.updateToolWear) ? (!singleLine ? "_KNUM=" : "") + xyzFormat.format(cycleType == "probing-z" ? (1000 + (cycle.toolLengthOffset)) : (2000 + (cycle.toolDiameterOffset))) : (isAngleProbing && !probeWCS) ? (!singleLine ? "_KNUM=" : "") + 0 : undefined // 2001 for D1
};
}
// <<<<< INCLUDED FROM include_files/getProbingArguments_siemens.cpi
// <<<<< INCLUDED FROM ../common/siemens-840d common.cps
settings.supportsToolVectorOutput = true; // specifies if the control does support tool axis vector output for multi axis toolpath