/**
Copyright (C) 2012-2025 by Autodesk, Inc.
All rights reserved.
Opticut post processor configuration.
$Revision: 44166 e813d608ccd22fb0949f73fcdb773b434407b131 $
$Date: 2025-02-19 11:52:14 $
FORKID {BDD2727B-2440-4782-BA68-2B9BC978E80A}
*/
description = "Opticut";
vendor = "OptiCut";
vendorUrl = "http://www.autodesk.com";
legal = "Copyright (C) 2012-2025 by Autodesk, Inc.";
certificationLevel = 2;
minimumRevision = 45917;
longDescription = "Generic milling post for Opticut.";
extension = "nc";
setCodePage("ascii");
capabilities = CAPABILITY_MILLING | CAPABILITY_MACHINE_SIMULATION;
tolerance = spatial(0.002, MM);
minimumChordLength = spatial(0.25, MM);
minimumCircularRadius = spatial(0.01, MM);
maximumCircularRadius = spatial(1000, MM);
minimumCircularSweep = toRad(0.01);
maximumCircularSweep = toRad(180);
allowHelicalMoves = true;
allowedCircularPlanes = undefined; // allow any circular motion
highFeedrate = (unit == MM) ? 5000 : 200;
// user-defined properties
properties = {
showSequenceNumbers: {
title : "Use sequence numbers",
description: "Use sequence numbers for each block of outputted code.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
},
sequenceNumberStart: {
title : "Start sequence number",
description: "The number at which to start the sequence numbers.",
group : "formats",
type : "integer",
value : 1,
scope : "post"
},
sequenceNumberIncrement: {
title : "Sequence number increment",
description: "The amount by which the sequence number is incremented by in each block.",
group : "formats",
type : "integer",
value : 1,
scope : "post"
},
separateWordsWithSpace: {
title : "Separate words with space",
description: "Adds spaces between words if 'yes' is selected.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
},
safePositionMethod: {
title : "Safe Retracts",
description: "Select your desired retract option. 'Clearance Height' retracts to the operation clearance height.",
group : "homePositions",
type : "enum",
values : [
{title:"Clearance Height", id:"clearanceHeight"}
],
value: "clearanceHeight",
scope: "post"
}
};
var gFormat = createFormat({prefix:"G", decimals:0});
var mFormat = createFormat({prefix:"M", decimals:0});
var diameterOffsetFormat = createFormat({prefix:"D", decimals:0});
var xyzFormat = createFormat({decimals:(unit == MM ? 3 : 4)});
var feedFormat = createFormat({decimals:(unit == MM ? 1 : 2)});
var toolFormat = createFormat({decimals:0});
var rpmFormat = createFormat({decimals:0});
var secFormat = createFormat({decimals:3});
var xOutput = createOutputVariable({onchange:function() {state.retractedX = false;}, prefix:"X"}, xyzFormat);
var yOutput = createOutputVariable({onchange:function() {state.retractedY = false;}, prefix:"Y"}, xyzFormat);
var zOutput = createOutputVariable({onchange:function() {state.retractedZ = false;}, prefix:"Z"}, xyzFormat);
var feedOutput = createOutputVariable({prefix:"F"}, feedFormat);
var sOutput = createOutputVariable({prefix:"S", control:CONTROL_FORCE}, rpmFormat);
// circular output
var iOutput = createOutputVariable({prefix:"I"}, xyzFormat);
var jOutput = createOutputVariable({prefix:"J"}, xyzFormat);
var kOutput = createOutputVariable({prefix:"K"}, xyzFormat);
var gMotionModal = createOutputVariable({onchange:function() {if (skipBlocks) {forceModals(gMotionModal);}}}, gFormat); // modal group 1 // G0-G3, ...
var gPlaneModal = createOutputVariable({onchange:function() {if (skipBlocks) {forceModals(gPlaneModal);} forceModals(gMotionModal);}}, gFormat); // modal group 2 // G17-19
var gAbsIncModal = createOutputVariable({onchange:function() {if (skipBlocks) {forceModals(gAbsIncModal);}}}, gFormat); // modal group 3 // G90-91
var gUnitModal = createOutputVariable({}, gFormat); // modal group 6 // G70-71
var settings = {
coolant: {
// samples:
// {id: COOLANT_THROUGH_TOOL, on: 88, off: 89}
// {id: COOLANT_THROUGH_TOOL, on: [8, 88], off: [9, 89]}
// {id: COOLANT_THROUGH_TOOL, on: "M88 P3 (myComment)", off: "M89"}
coolants: [
{id:COOLANT_FLOOD, on:8},
{id:COOLANT_MIST},
{id:COOLANT_THROUGH_TOOL},
{id:COOLANT_AIR},
{id:COOLANT_AIR_THROUGH_TOOL},
{id:COOLANT_SUCTION},
{id:COOLANT_FLOOD_MIST},
{id:COOLANT_FLOOD_THROUGH_TOOL},
{id:COOLANT_OFF, off:9}
],
singleLineCoolant: false, // specifies to output multiple coolant codes in one line rather than in separate lines
},
retract: {
cancelRotationOnRetracting: false, // specifies that rotations (G68) need to be canceled prior to retracting
methodXY : undefined, // special condition, overwrite retract behavior per axis
methodZ : undefined, // special condition, overwrite retract behavior per axis
useZeroValues : [], // enter property value id(s) for using "0" value instead of machineConfiguration axes home position values (ie G30 Z0)
homeXY : {onIndexing:false, onToolChange:false, onProgramEnd:{axes:[X, Y]}} // Specifies when the machine should be homed in X/Y. Sample: onIndexing:{axes:[X, Y], singleLine:false}
},
comments: {
permittedCommentChars: undefined, // letters are not case sensitive, use option 'outputFormat' below. Set to 'undefined' to allow any character
prefix : "(", // specifies the prefix for the comment
suffix : ")", // specifies the suffix for the comment
outputFormat : "ignoreCase", // can be set to "upperCase", "lowerCase" and "ignoreCase". Set to "ignoreCase" to write comments without upper/lower case formatting
maximumLineLength : 80 // the maximum number of characters allowed in a line, set to 0 to disable comment output
},
maximumSequenceNumber : undefined, // the maximum sequence number (Nxxx), use 'undefined' for unlimited
outputToolLengthCompensation: false, // default: true, specifies if tool length compensation code should be output (G43)
outputToolLengthOffset : false, // default: true, specifies if tool length offset code should be output (Hxx)
outputToolDiameterOffset : false, // default: true, specifies if tool diameter offset code should be output for tool radius compensation (Dxx)
// fixed settings below, do not modify
supportsTCP : false, // this postprocessor does not support TCP
supportsInverseTimeFeed : false // this postprocessor does not support inverse time feedrates
};
function onOpen() {
if (machineConfiguration.isMultiAxisConfiguration()) {
error(localize("This postprocessor does not support multi axis machine configurations."));
}
if (!getProperty("separateWordsWithSpace")) {
setWordSeparator("");
}
gPlaneModal.disable();
writeComment(programName);
writeComment(programComment);
writeProgramHeader();
// absolute coordinates and feed per min
writeBlock(gAbsIncModal.format(90));
writeBlock(gUnitModal.format(unit == MM ? 71 : 70));
}
function writeInitialPositioning(position, isRequired) {
var motionCode = {single:0, multi:0};
switch (highFeedMapping) {
case HIGH_FEED_MAP_ANY:
motionCode = {single:1, multi:1}; // map all rapid traversals to high feed
break;
case HIGH_FEED_MAP_MULTI:
motionCode = {single:0, multi:1}; // map rapid traversal along more than one axis to high feed
break;
}
var feed = (highFeedMapping != HIGH_FEED_NO_MAPPING) ? getFeed(highFeedrate) : "";
forceXYZ();
if (isRequired) {
if (!state.retractedZ && xyzFormat.getResultingValue(getCurrentPosition().z) < xyzFormat.getResultingValue(position.z)) {
writeBlock(gMotionModal.format(motionCode.single), zOutput.format(position.z), feed);
machineSimulation({z:position.z});
}
writeBlock(gMotionModal.format(motionCode.multi), xOutput.format(position.x), yOutput.format(position.y), feed);
machineSimulation({x:position.x, y:position.y});
} else {
writeBlock(
gMotionModal.format(motionCode.multi), xOutput.format(position.x), yOutput.format(position.y), zOutput.format(position.z), feed
);
machineSimulation({x:position.x, y:position.y, z:position.z});
}
}
function onSection() {
var forceSectionRestart = optionalSection && !currentSection.isOptional();
optionalSection = currentSection.isOptional();
var insertToolCall = isToolChangeNeeded("number") || forceSectionRestart;
if (insertToolCall) {
writeRetract(Z); // retract
}
startSpindle(tool, insertToolCall);
forceXYZ();
{ // pure 3D
var remaining = currentSection.workPlane;
if (!isSameDirection(remaining.forward, new Vector(0, 0, 1))) {
error(localize("Tool orientation is not supported."));
return;
}
setRotation(remaining);
}
setCoolant(tool.coolant); // writes the required coolant codes
// prepositioning
var initialPosition = getFramePosition(currentSection.getInitialPosition());
writeInitialPositioning(initialPosition, true);
}
function onDwell(seconds) {
var maxValue = 99999.999;
if (seconds > maxValue) {
warning(subst(localize("Dwelling time of '%1' exceeds the maximum value of '%2' in operation '%3'"), seconds, maxValue, getParameter("operation-comment", "")));
}
seconds = clamp(0.001, seconds, 99999.999);
writeBlock(gFormat.format(4), "P" + secFormat.format(seconds));
}
function onSpindleSpeed(spindleSpeed) {
writeBlock(sOutput.format(spindleSpeed));
}
function onCircular(clockwise, cx, cy, cz, x, y, z, feed) {
if (isFullCircle()) {
switch (getCircularPlane()) {
case PLANE_XY:
writeBlock(gMotionModal.format(clockwise ? 2 : 3), zOutput.format(z), iOutput.format(cx), jOutput.format(cy), getFeed(feed));
break;
default:
linearize(tolerance);
}
} else {
switch (getCircularPlane()) {
case PLANE_XY:
writeBlock(gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), iOutput.format(cx), jOutput.format(cy), getFeed(feed));
break;
default:
linearize(tolerance);
}
}
}
var mapCommand = {
COMMAND_END : 2,
COMMAND_SPINDLE_CLOCKWISE : 3,
COMMAND_SPINDLE_COUNTERCLOCKWISE: 4,
COMMAND_STOP_SPINDLE : 5
};
function onCommand(command) {
switch (command) {
case COMMAND_COOLANT_OFF:
setCoolant(COOLANT_OFF);
return;
case COMMAND_COOLANT_ON:
setCoolant(tool.coolant);
return;
case COMMAND_STOP:
writeBlock(mFormat.format(0));
forceSpindleSpeed = true;
forceCoolant = true;
return;
case COMMAND_OPTIONAL_STOP:
writeBlock(mFormat.format(1));
forceSpindleSpeed = true;
forceCoolant = true;
return;
case COMMAND_START_SPINDLE:
forceSpindleSpeed = true;
writeBlock(sOutput.format(spindleSpeed), mFormat.format(tool.clockwise ? 3 : 4));
forceCoolant = true;
return;
case COMMAND_LOCK_MULTI_AXIS:
return;
case COMMAND_UNLOCK_MULTI_AXIS:
return;
case COMMAND_BREAK_CONTROL:
return;
case COMMAND_TOOL_MEASURE:
return;
}
var stringId = getCommandStringId(command);
var mcode = mapCommand[stringId];
if (mcode != undefined) {
writeBlock(mFormat.format(mcode));
} else {
onUnsupportedCommand(command);
}
}
function onSectionEnd() {
if (!isLastSection()) {
if (getNextSection().getTool().coolant != tool.coolant) {
setCoolant(COOLANT_OFF);
}
if (tool.breakControl && isToolChangeNeeded(getNextSection(), getProperty("toolAsName") ? "description" : "number")) {
onCommand(COMMAND_BREAK_CONTROL);
}
}
}
function onClose() {
onCommand(COMMAND_COOLANT_OFF);
onCommand(COMMAND_STOP_SPINDLE);
writeRetract(Z); // retract
writeBlock(mFormat.format(30)); // stop program, spindle stop, coolant off
}
// >>>>> INCLUDED FROM include_files/commonFunctions.cpi
// internal variables, do not change
var receivedMachineConfiguration;
var tcp = {isSupportedByControl:getSetting("supportsTCP", true), isSupportedByMachine:false, isSupportedByOperation:false};
var state = {
retractedX : false, // specifies that the machine has been retracted in X
retractedY : false, // specifies that the machine has been retracted in Y
retractedZ : false, // specifies that the machine has been retracted in Z
tcpIsActive : false, // specifies that TCP is currently active
twpIsActive : false, // specifies that TWP is currently active
lengthCompensationActive: !getSetting("outputToolLengthCompensation", true), // specifies that tool length compensation is active
mainState : true // specifies the current context of the state (true = main, false = optional)
};
var validateLengthCompensation = getSetting("outputToolLengthCompensation", true); // disable validation when outputToolLengthCompensation is disabled
var multiAxisFeedrate;
var sequenceNumber;
var optionalSection = false;
var currentWorkOffset;
var forceSpindleSpeed = false;
var operationNeedsSafeStart = false; // used to convert blocks to optional for safeStartAllOperations
function activateMachine() {
// disable unsupported rotary axes output
if (!machineConfiguration.isMachineCoordinate(0) && (typeof aOutput != "undefined")) {
aOutput.disable();
}
if (!machineConfiguration.isMachineCoordinate(1) && (typeof bOutput != "undefined")) {
bOutput.disable();
}
if (!machineConfiguration.isMachineCoordinate(2) && (typeof cOutput != "undefined")) {
cOutput.disable();
}
// setup usage of useTiltedWorkplane
settings.workPlaneMethod.useTiltedWorkplane = getProperty("useTiltedWorkplane") != undefined ? getProperty("useTiltedWorkplane") :
getSetting("workPlaneMethod.useTiltedWorkplane", false);
settings.workPlaneMethod.useABCPrepositioning = getSetting("workPlaneMethod.useABCPrepositioning", true);
if (!machineConfiguration.isMultiAxisConfiguration()) {
return; // don't need to modify any settings for 3-axis machines
}
// identify if any of the rotary axes has TCP enabled
var axes = [machineConfiguration.getAxisU(), machineConfiguration.getAxisV(), machineConfiguration.getAxisW()];
tcp.isSupportedByMachine = axes.some(function(axis) {return axis.isEnabled() && axis.isTCPEnabled();}); // true if TCP is enabled on any rotary axis
// save multi-axis feedrate settings from machine configuration
var mode = machineConfiguration.getMultiAxisFeedrateMode();
var type = mode == FEED_INVERSE_TIME ? machineConfiguration.getMultiAxisFeedrateInverseTimeUnits() :
(mode == FEED_DPM ? machineConfiguration.getMultiAxisFeedrateDPMType() : DPM_STANDARD);
multiAxisFeedrate = {
mode : mode,
maximum : machineConfiguration.getMultiAxisFeedrateMaximum(),
type : type,
tolerance: mode == FEED_DPM ? machineConfiguration.getMultiAxisFeedrateOutputTolerance() : 0,
bpwRatio : mode == FEED_DPM ? machineConfiguration.getMultiAxisFeedrateBpwRatio() : 1
};
// setup of retract/reconfigure TAG: Only needed until post kernel supports these machine config settings
if (receivedMachineConfiguration && machineConfiguration.performRewinds()) {
safeRetractDistance = machineConfiguration.getSafeRetractDistance();
safePlungeFeed = machineConfiguration.getSafePlungeFeedrate();
safeRetractFeed = machineConfiguration.getSafeRetractFeedrate();
}
if (typeof safeRetractDistance == "number" && getProperty("safeRetractDistance") != undefined && getProperty("safeRetractDistance") != 0) {
safeRetractDistance = getProperty("safeRetractDistance");
}
if (machineConfiguration.isHeadConfiguration() && getSetting("workPlaneMethod.compensateToolLength", false)) {
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (section.isMultiAxis()) {
machineConfiguration.setToolLength(getBodyLength(section.getTool())); // define the tool length for head adjustments
section.optimizeMachineAnglesByMachine(machineConfiguration, OPTIMIZE_AXIS);
}
}
} else {
optimizeMachineAngles2(OPTIMIZE_AXIS);
}
}
function getBodyLength(tool) {
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (tool.number == section.getTool().number) {
if (section.hasParameter("operation:tool_assemblyGaugeLength")) { // For Fusion
return tool.bodyLength + tool.holderLength;
} else { // Legacy products
return section.getParameter("operation:tool_overallLength", tool.bodyLength + tool.holderLength);
}
}
}
return tool.bodyLength + tool.holderLength;
}
function getFeed(f) {
if (getProperty("useG95")) {
return feedOutput.format(f / spindleSpeed); // use feed value
}
if (typeof activeMovements != "undefined" && activeMovements) {
var feedContext = activeMovements[movement];
if (feedContext != undefined) {
if (!feedFormat.areDifferent(feedContext.feed, f)) {
if (feedContext.id == currentFeedId) {
return ""; // nothing has changed
}
forceFeed();
currentFeedId = feedContext.id;
return settings.parametricFeeds.feedOutputVariable + (settings.parametricFeeds.firstFeedParameter + feedContext.id);
}
}
currentFeedId = undefined; // force parametric feed next time
}
return feedOutput.format(f); // use feed value
}
function validateCommonParameters() {
validateToolData();
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (getSection(0).workOffset == 0 && section.workOffset > 0) {
if (!(typeof wcsDefinitions != "undefined" && wcsDefinitions.useZeroOffset)) {
error(localize("Using multiple work offsets is not possible if the initial work offset is 0."));
}
}
if (section.isMultiAxis()) {
if (!section.isOptimizedForMachine() &&
(!getSetting("workPlaneMethod.useTiltedWorkplane", false) || !getSetting("supportsToolVectorOutput", false))) {
error(localize("This postprocessor requires a machine configuration for 5-axis simultaneous toolpath."));
}
if (machineConfiguration.getMultiAxisFeedrateMode() == FEED_INVERSE_TIME && !getSetting("supportsInverseTimeFeed", true)) {
error(localize("This postprocessor does not support inverse time feedrates."));
}
if (getSetting("supportsToolVectorOutput", false) && !tcp.isSupportedByControl) {
error(localize("Incompatible postprocessor settings detected." + EOL +
"Setting 'supportsToolVectorOutput' requires setting 'supportsTCP' to be enabled as well."));
}
}
}
if (!tcp.isSupportedByControl && tcp.isSupportedByMachine) {
error(localize("The machine configuration has TCP enabled which is not supported by this postprocessor."));
}
if (getProperty("safePositionMethod") == "clearanceHeight") {
var msg = "-Attention- Property 'Safe Retracts' is set to 'Clearance Height'." + EOL +
"Ensure the clearance height will clear the part and or fixtures." + EOL +
"Raise the Z-axis to a safe height before starting the program.";
warning(msg);
writeComment(msg);
}
}
function validateToolData() {
var _default = 99999;
var _maximumSpindleRPM = machineConfiguration.getMaximumSpindleSpeed() > 0 ? machineConfiguration.getMaximumSpindleSpeed() :
settings.maximumSpindleRPM == undefined ? _default : settings.maximumSpindleRPM;
var _maximumToolNumber = machineConfiguration.isReceived() && machineConfiguration.getNumberOfTools() > 0 ? machineConfiguration.getNumberOfTools() :
settings.maximumToolNumber == undefined ? _default : settings.maximumToolNumber;
var _maximumToolLengthOffset = settings.maximumToolLengthOffset == undefined ? _default : settings.maximumToolLengthOffset;
var _maximumToolDiameterOffset = settings.maximumToolDiameterOffset == undefined ? _default : settings.maximumToolDiameterOffset;
var header = ["Detected maximum values are out of range.", "Maximum values:"];
var warnings = {
toolNumber : {msg:"Tool number value exceeds the maximum value for tool: " + EOL, max:" Tool number: " + _maximumToolNumber, values:[]},
lengthOffset : {msg:"Tool length offset value exceeds the maximum value for tool: " + EOL, max:" Tool length offset: " + _maximumToolLengthOffset, values:[]},
diameterOffset: {msg:"Tool diameter offset value exceeds the maximum value for tool: " + EOL, max:" Tool diameter offset: " + _maximumToolDiameterOffset, values:[]},
spindleSpeed : {msg:"Spindle speed exceeds the maximum value for operation: " + EOL, max:" Spindle speed: " + _maximumSpindleRPM, values:[]}
};
var toolIds = [];
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (toolIds.indexOf(section.getTool().getToolId()) === -1) { // loops only through sections which have a different tool ID
var toolNumber = section.getTool().number;
var lengthOffset = section.getTool().lengthOffset;
var diameterOffset = section.getTool().diameterOffset;
var comment = section.getParameter("operation-comment", "");
if (toolNumber > _maximumToolNumber && !getProperty("toolAsName")) {
warnings.toolNumber.values.push(SP + toolNumber + EOL);
}
if (lengthOffset > _maximumToolLengthOffset) {
warnings.lengthOffset.values.push(SP + "Tool " + toolNumber + " (" + comment + "," + " Length offset: " + lengthOffset + ")" + EOL);
}
if (diameterOffset > _maximumToolDiameterOffset) {
warnings.diameterOffset.values.push(SP + "Tool " + toolNumber + " (" + comment + "," + " Diameter offset: " + diameterOffset + ")" + EOL);
}
toolIds.push(section.getTool().getToolId());
}
// loop through all sections regardless of tool id for idenitfying spindle speeds
// identify if movement ramp is used in current toolpath, use ramp spindle speed for comparisons
var ramp = section.getMovements() & ((1 << MOVEMENT_RAMP) | (1 << MOVEMENT_RAMP_ZIG_ZAG) | (1 << MOVEMENT_RAMP_PROFILE) | (1 << MOVEMENT_RAMP_HELIX));
var _sectionSpindleSpeed = Math.max(section.getTool().spindleRPM, ramp ? section.getTool().rampingSpindleRPM : 0, 0);
if (_sectionSpindleSpeed > _maximumSpindleRPM) {
warnings.spindleSpeed.values.push(SP + section.getParameter("operation-comment", "") + " (" + _sectionSpindleSpeed + " RPM" + ")" + EOL);
}
}
// sort lists by tool number
warnings.toolNumber.values.sort(function(a, b) {return a - b;});
warnings.lengthOffset.values.sort(function(a, b) {return a.localeCompare(b);});
warnings.diameterOffset.values.sort(function(a, b) {return a.localeCompare(b);});
var warningMessages = [];
for (var key in warnings) {
if (warnings[key].values != "") {
header.push(warnings[key].max); // add affected max values to the header
warningMessages.push(warnings[key].msg + warnings[key].values.join(""));
}
}
if (warningMessages.length != 0) {
warningMessages.unshift(header.join(EOL) + EOL);
warning(warningMessages.join(EOL));
}
}
function forceFeed() {
currentFeedId = undefined;
feedOutput.reset();
}
/** Force output of X, Y, and Z. */
function forceXYZ() {
xOutput.reset();
yOutput.reset();
zOutput.reset();
}
/** Force output of A, B, and C. */
function forceABC() {
aOutput.reset();
bOutput.reset();
cOutput.reset();
}
/** Force output of X, Y, Z, A, B, C, and F on next output. */
function forceAny() {
forceXYZ();
forceABC();
forceFeed();
}
/**
Writes the specified block.
*/
function writeBlock() {
var text = formatWords(arguments);
if (!text) {
return;
}
var prefix = getSetting("sequenceNumberPrefix", "N");
var suffix = getSetting("writeBlockSuffix", "");
if ((optionalSection || skipBlocks) && !getSetting("supportsOptionalBlocks", true)) {
error(localize("Optional blocks are not supported by this post."));
}
if (getProperty("showSequenceNumbers") == "true") {
if (sequenceNumber == undefined || sequenceNumber >= settings.maximumSequenceNumber) {
sequenceNumber = getProperty("sequenceNumberStart");
}
if (optionalSection || skipBlocks) {
writeWords2("/", prefix + sequenceNumber, text + suffix);
} else {
writeWords2(prefix + sequenceNumber, text + suffix);
}
sequenceNumber += getProperty("sequenceNumberIncrement");
} else {
if (optionalSection || skipBlocks) {
writeWords2("/", text + suffix);
} else {
writeWords(text + suffix);
}
}
}
validate(settings.comments, "Setting 'comments' is required but not defined.");
function formatComment(text) {
var prefix = settings.comments.prefix;
var suffix = settings.comments.suffix;
var _permittedCommentChars = settings.comments.permittedCommentChars == undefined ? "" : settings.comments.permittedCommentChars;
switch (settings.comments.outputFormat) {
case "upperCase":
text = text.toUpperCase();
_permittedCommentChars = _permittedCommentChars.toUpperCase();
break;
case "lowerCase":
text = text.toLowerCase();
_permittedCommentChars = _permittedCommentChars.toLowerCase();
break;
case "ignoreCase":
_permittedCommentChars = _permittedCommentChars.toUpperCase() + _permittedCommentChars.toLowerCase();
break;
default:
error(localize("Unsupported option specified for setting 'comments.outputFormat'."));
}
if (_permittedCommentChars != "") {
text = filterText(String(text), _permittedCommentChars);
}
text = String(text).substring(0, settings.comments.maximumLineLength - prefix.length - suffix.length);
return text != "" ? prefix + text + suffix : "";
}
/**
Output a comment.
*/
function writeComment(text) {
if (!text) {
return;
}
var comments = String(text).split(EOL);
for (comment in comments) {
var _comment = formatComment(comments[comment]);
if (_comment) {
if (getSetting("comments.showSequenceNumbers", false)) {
writeBlock(_comment);
} else {
writeln(_comment);
}
}
}
}
function onComment(text) {
writeComment(text);
}
/**
Writes the specified block - used for tool changes only.
*/
function writeToolBlock() {
var show = getProperty("showSequenceNumbers");
setProperty("showSequenceNumbers", (show == "true" || show == "toolChange") ? "true" : "false");
writeBlock(arguments);
setProperty("showSequenceNumbers", show);
machineSimulation({/*x:toPreciseUnit(200, MM), y:toPreciseUnit(200, MM), coordinates:MACHINE,*/ mode:TOOLCHANGE}); // move machineSimulation to a tool change position
}
var skipBlocks = false;
var initialState = JSON.parse(JSON.stringify(state)); // save initial state
var optionalState = JSON.parse(JSON.stringify(state));
var saveCurrentSectionId = undefined;
function writeStartBlocks(isRequired, code) {
var saveSkipBlocks = skipBlocks;
var saveMainState = state; // save main state
if (!isRequired) {
if (!getProperty("safeStartAllOperations", false)) {
return; // when safeStartAllOperations is disabled, dont output code and return
}
if (saveCurrentSectionId != getCurrentSectionId()) {
saveCurrentSectionId = getCurrentSectionId();
forceModals(); // force all modal variables when entering a new section
optionalState = Object.create(initialState); // reset optionalState to initialState when entering a new section
}
skipBlocks = true; // if values are not required, but safeStartAllOperations is enabled - write following blocks as optional
state = optionalState; // set state to optionalState if skipBlocks is true
state.mainState = false;
}
code(); // writes out the code which is passed to this function as an argument
state = saveMainState; // restore main state
skipBlocks = saveSkipBlocks; // restore skipBlocks value
}
var pendingRadiusCompensation = -1;
function onRadiusCompensation() {
pendingRadiusCompensation = radiusCompensation;
if (pendingRadiusCompensation >= 0 && !getSetting("supportsRadiusCompensation", true)) {
error(localize("Radius compensation mode is not supported."));
return;
}
}
function onPassThrough(text) {
var commands = String(text).split(",");
for (text in commands) {
writeBlock(commands[text]);
}
}
function forceModals() {
if (arguments.length == 0) { // reset all modal variables listed below
if (typeof gMotionModal != "undefined") {
gMotionModal.reset();
}
if (typeof gPlaneModal != "undefined") {
gPlaneModal.reset();
}
if (typeof gAbsIncModal != "undefined") {
gAbsIncModal.reset();
}
if (typeof gFeedModeModal != "undefined") {
gFeedModeModal.reset();
}
} else {
for (var i in arguments) {
arguments[i].reset(); // only reset the modal variable passed to this function
}
}
}
/** Helper function to be able to use a default value for settings which do not exist. */
function getSetting(setting, defaultValue) {
var result = defaultValue;
var keys = setting.split(".");
var obj = settings;
for (var i in keys) {
if (obj[keys[i]] != undefined) { // setting does exist
result = obj[keys[i]];
if (typeof [keys[i]] === "object") {
obj = obj[keys[i]];
continue;
}
} else { // setting does not exist, use default value
if (defaultValue != undefined) {
result = defaultValue;
} else {
error("Setting '" + keys[i] + "' has no default value and/or does not exist.");
return undefined;
}
}
}
return result;
}
function getForwardDirection(_section) {
var forward = undefined;
var _optimizeType = settings.workPlaneMethod && settings.workPlaneMethod.optimizeType;
if (_section.isMultiAxis()) {
forward = _section.workPlane.forward;
} else if (!getSetting("workPlaneMethod.useTiltedWorkplane", false) && machineConfiguration.isMultiAxisConfiguration()) {
if (_optimizeType == undefined) {
var saveRotation = getRotation();
getWorkPlaneMachineABC(_section, true);
forward = getRotation().forward;
setRotation(saveRotation); // reset rotation
} else {
var abc = getWorkPlaneMachineABC(_section, false);
var forceAdjustment = settings.workPlaneMethod.optimizeType == OPTIMIZE_TABLES || settings.workPlaneMethod.optimizeType == OPTIMIZE_BOTH;
forward = machineConfiguration.getOptimizedDirection(_section.workPlane.forward, abc, false, forceAdjustment);
}
} else {
forward = getRotation().forward;
}
return forward;
}
function getRetractParameters() {
var _arguments = typeof arguments[0] === "object" ? arguments[0].axes : arguments;
var singleLine = arguments[0].singleLine == undefined ? true : arguments[0].singleLine;
var words = []; // store all retracted axes in an array
var retractAxes = new Array(false, false, false);
var method = getProperty("safePositionMethod", "undefined");
if (method == "clearanceHeight") {
if (!is3D()) {
error(localize("Safe retract option 'Clearance Height' is only supported when all operations are along the setup Z-axis."));
}
return undefined;
}
validate(settings.retract, "Setting 'retract' is required but not defined.");
validate(_arguments.length != 0, "No axis specified for getRetractParameters().");
for (i in _arguments) {
retractAxes[_arguments[i]] = true;
}
if ((retractAxes[0] || retractAxes[1]) && !state.retractedZ) { // retract Z first before moving to X/Y home
error(localize("Retracting in X/Y is not possible without being retracted in Z."));
return undefined;
}
// special conditions
if (retractAxes[0] || retractAxes[1]) {
method = getSetting("retract.methodXY", method);
}
if (retractAxes[2]) {
method = getSetting("retract.methodZ", method);
}
// define home positions
var useZeroValues = (settings.retract.useZeroValues && settings.retract.useZeroValues.indexOf(method) != -1);
var _xHome = machineConfiguration.hasHomePositionX() && !useZeroValues ? machineConfiguration.getHomePositionX() : toPreciseUnit(0, MM);
var _yHome = machineConfiguration.hasHomePositionY() && !useZeroValues ? machineConfiguration.getHomePositionY() : toPreciseUnit(0, MM);
var _zHome = machineConfiguration.getRetractPlane() != 0 && !useZeroValues ? machineConfiguration.getRetractPlane() : toPreciseUnit(0, MM);
for (var i = 0; i < _arguments.length; ++i) {
switch (_arguments[i]) {
case X:
if (!state.retractedX) {
words.push("X" + xyzFormat.format(_xHome));
xOutput.reset();
state.retractedX = true;
}
break;
case Y:
if (!state.retractedY) {
words.push("Y" + xyzFormat.format(_yHome));
yOutput.reset();
state.retractedY = true;
}
break;
case Z:
if (!state.retractedZ) {
words.push("Z" + xyzFormat.format(_zHome));
zOutput.reset();
state.retractedZ = true;
}
break;
default:
error(localize("Unsupported axis specified for getRetractParameters()."));
return undefined;
}
}
return {
method : method,
retractAxes: retractAxes,
words : words,
positions : {
x: retractAxes[0] ? _xHome : undefined,
y: retractAxes[1] ? _yHome : undefined,
z: retractAxes[2] ? _zHome : undefined},
singleLine: singleLine};
}
/** Returns true when subprogram logic does exist into the post. */
function subprogramsAreSupported() {
return typeof subprogramState != "undefined";
}
// Start of machine simulation connection move support
var debugSimulation = false; // enable to output debug information for connection move support in the NC program
var TCPON = "TCP ON";
var TCPOFF = "TCP OFF";
var TWPON = "TWP ON";
var TWPOFF = "TWP OFF";
var TOOLCHANGE = "TOOL CHANGE";
var RETRACTTOOLAXIS = "RETRACT TOOLAXIS";
var WORK = "WORK CS";
var MACHINE = "MACHINE CS";
var MIN = "MIN";
var MAX = "MAX";
var WARNING_NON_RANGE = [0, 1, 2];
var isTwpOn; // only used for debugging
var isTcpOn; // only used for debugging
/**
* Helper function for connection moves in machine simulation.
* @param {Object} parameters An object containing the desired options for machine simulation.
* @note Available properties are:
* @param {Number} x X axis position, alternatively use MIN or MAX to move to the axis limit
* @param {Number} y Y axis position, alternatively use MIN or MAX to move to the axis limit
* @param {Number} z Z axis position, alternatively use MIN or MAX to move to the axis limit
* @param {Number} a A axis position (in radians)
* @param {Number} b B axis position (in radians)
* @param {Number} c C axis position (in radians)
* @param {Number} feed desired feedrate, automatically set to high/current feedrate if not specified
* @param {String} mode mode TCPON | TCPOFF | TWPON | TWPOFF | TOOLCHANGE | RETRACTTOOLAXIS
* @param {String} coordinates WORK | MACHINE - if undefined, work coordinates will be used by default
* @param {Number} eulerAngles the calculated Euler angles for the workplane
* @example
machineSimulation({a:abc.x, b:abc.y, c:abc.z, coordinates:MACHINE});
machineSimulation({x:toPreciseUnit(200, MM), y:toPreciseUnit(200, MM), coordinates:MACHINE, mode:TOOLCHANGE});
*/
function machineSimulation(parameters) {
if (revision < 50075 || skipBlocks) {
return; // return when post kernel revision is lower than 50075 or when skipBlocks is enabled
}
getAxisLimit = function(axis, limit) {
validate(limit == MIN || limit == MAX, subst(localize("Invalid argument \"%1\" passed to the machineSimulation function."), limit));
var range = axis.getRange();
if (range.isNonRange()) {
var axisLetters = ["X", "Y", "Z"];
var warningMessage = subst(localize("An attempt was made to move the \"%1\" axis to its MIN/MAX limits during machine simulation, but its range is set to \"unlimited\"." + EOL +
"A limited range must be set for the \"%1\" axis in the machine definition, or these motions will not be shown in machine simulation."), axisLetters[axis.getCoordinate()]);
warningOnce(warningMessage, WARNING_NON_RANGE[axis.getCoordinate()]);
return undefined;
}
return limit == MIN ? range.minimum : range.maximum;
};
var x = (isNaN(parameters.x) && parameters.x) ? getAxisLimit(machineConfiguration.getAxisX(), parameters.x) : parameters.x;
var y = (isNaN(parameters.y) && parameters.y) ? getAxisLimit(machineConfiguration.getAxisY(), parameters.y) : parameters.y;
var z = (isNaN(parameters.z) && parameters.z) ? getAxisLimit(machineConfiguration.getAxisZ(), parameters.z) : parameters.z;
var rotaryAxesErrorMessage = localize("Invalid argument for rotary axes passed to the machineSimulation function. Only numerical values are supported.");
var a = (isNaN(parameters.a) && parameters.a) ? error(rotaryAxesErrorMessage) : parameters.a;
var b = (isNaN(parameters.b) && parameters.b) ? error(rotaryAxesErrorMessage) : parameters.b;
var c = (isNaN(parameters.c) && parameters.c) ? error(rotaryAxesErrorMessage) : parameters.c;
var coordinates = parameters.coordinates;
var eulerAngles = parameters.eulerAngles;
var feed = parameters.feed;
if (feed === undefined && typeof gMotionModal !== "undefined") {
feed = gMotionModal.getCurrent() !== 0;
}
var mode = parameters.mode;
var performToolChange = mode == TOOLCHANGE;
if (mode !== undefined && ![TCPON, TCPOFF, TWPON, TWPOFF, TOOLCHANGE, RETRACTTOOLAXIS].includes(mode)) {
error(subst("Mode '%1' is not supported.", mode));
}
// mode takes precedence over TCP/TWP states
var enableTCP = false;
var enableTWP = false;
if (mode === TCPON) {
enableTCP = true;
} else if (mode === TCPOFF) {
enableTWP = typeof state !== "undefined" && state.twpIsActive;
} else if (mode === TWPON) {
enableTWP = true;
} else if (mode === TWPOFF) {
enableTCP = typeof state !== "undefined" && state.tcpIsActive;
} else {
enableTCP = typeof state !== "undefined" && state.tcpIsActive;
enableTWP = typeof state !== "undefined" && state.twpIsActive;
}
var disableTCP = !enableTCP;
var disableTWP = !enableTWP;
// update TCP mode
if (enableTCP) {
simulation.setTWPModeOff();
simulation.setTCPModeOn();
isTwpOn = false;
isTcpOn = true;
}
if (disableTCP) {
simulation.setTCPModeOff();
isTcpOn = false;
}
// update TWP mode
if (enableTWP) {
simulation.setTCPModeOff();
if (settings.workPlaneMethod.eulerConvention == undefined) {
simulation.setTWPModeAlignToCurrentPose();
} else if (eulerAngles) {
simulation.setTWPModeByEulerAngles(settings.workPlaneMethod.eulerConvention, eulerAngles.x, eulerAngles.y, eulerAngles.z);
}
isTwpOn = true;
isTcpOn = false;
}
if (disableTWP) {
simulation.setTWPModeOff();
isTwpOn = false;
}
if (mode == RETRACTTOOLAXIS) {
simulation.retractAlongToolAxisToLimit();
}
if (debugSimulation) {
writeln(" DEBUG" + JSON.stringify(parameters));
writeln(" DEBUG" + JSON.stringify({isTwpOn:isTwpOn, isTcpOn:isTcpOn, feed:feed}));
}
if (x !== undefined || y !== undefined || z !== undefined || a !== undefined || b !== undefined || c !== undefined) {
if (x !== undefined) {simulation.setTargetX(x);}
if (y !== undefined) {simulation.setTargetY(y);}
if (z !== undefined) {simulation.setTargetZ(z);}
if (a !== undefined) {simulation.setTargetA(a);}
if (b !== undefined) {simulation.setTargetB(b);}
if (c !== undefined) {simulation.setTargetC(c);}
if (feed != undefined && feed) {
simulation.setMotionToLinear();
simulation.setFeedrate(typeof feed == "number" ? feed : feedOutput.getCurrent() == 0 ? highFeedrate : feedOutput.getCurrent());
} else {
simulation.setMotionToRapid();
}
if (coordinates != undefined && coordinates == MACHINE) {
simulation.moveToTargetInMachineCoords();
} else {
simulation.moveToTargetInWorkCoords();
}
}
if (performToolChange) {
simulation.performToolChangeCycle();
simulation.moveToTargetInMachineCoords();
}
}
// <<<<< INCLUDED FROM include_files/commonFunctions.cpi
// >>>>> INCLUDED FROM include_files/startSpindle.cpi
function startSpindle(tool, insertToolCall) {
if (tool.type != TOOL_PROBE) {
var spindleSpeedIsRequired = insertToolCall || forceSpindleSpeed || isFirstSection() ||
rpmFormat.areDifferent(spindleSpeed, sOutput.getCurrent()) ||
(tool.clockwise != getPreviousSection().getTool().clockwise);
writeStartBlocks(spindleSpeedIsRequired, function () {
if (spindleSpeedIsRequired || operationNeedsSafeStart) {
onCommand(COMMAND_START_SPINDLE);
}
});
}
}
// <<<<< INCLUDED FROM include_files/startSpindle.cpi
// >>>>> INCLUDED FROM include_files/coolant.cpi
var currentCoolantMode = COOLANT_OFF;
var coolantOff = undefined;
var isOptionalCoolant = false;
var forceCoolant = false;
function setCoolant(coolant) {
var coolantCodes = getCoolantCodes(coolant);
if (Array.isArray(coolantCodes)) {
writeStartBlocks(!isOptionalCoolant, function () {
if (settings.coolant.singleLineCoolant) {
writeBlock(coolantCodes.join(getWordSeparator()));
} else {
for (var c in coolantCodes) {
writeBlock(coolantCodes[c]);
}
}
});
return undefined;
}
return coolantCodes;
}
function getCoolantCodes(coolant, format) {
if (!getProperty("useCoolant", true)) {
return undefined; // coolant output is disabled by property if it exists
}
isOptionalCoolant = false;
if (typeof operationNeedsSafeStart == "undefined") {
operationNeedsSafeStart = false;
}
var multipleCoolantBlocks = new Array(); // create a formatted array to be passed into the outputted line
var coolants = settings.coolant.coolants;
if (!coolants) {
error(localize("Coolants have not been defined."));
}
if (tool.type && tool.type == TOOL_PROBE) { // avoid coolant output for probing
coolant = COOLANT_OFF;
}
if (coolant == currentCoolantMode) {
if (operationNeedsSafeStart && coolant != COOLANT_OFF) {
isOptionalCoolant = true;
} else if (!forceCoolant || coolant == COOLANT_OFF) {
return undefined; // coolant is already active
}
}
if ((coolant != COOLANT_OFF) && (currentCoolantMode != COOLANT_OFF) && (coolantOff != undefined) && !forceCoolant && !isOptionalCoolant) {
if (Array.isArray(coolantOff)) {
for (var i in coolantOff) {
multipleCoolantBlocks.push(coolantOff[i]);
}
} else {
multipleCoolantBlocks.push(coolantOff);
}
}
forceCoolant = false;
var m;
var coolantCodes = {};
for (var c in coolants) { // find required coolant codes into the coolants array
if (coolants[c].id == coolant) {
coolantCodes.on = coolants[c].on;
if (coolants[c].off != undefined) {
coolantCodes.off = coolants[c].off;
break;
} else {
for (var i in coolants) {
if (coolants[i].id == COOLANT_OFF) {
coolantCodes.off = coolants[i].off;
break;
}
}
}
}
}
if (coolant == COOLANT_OFF) {
m = !coolantOff ? coolantCodes.off : coolantOff; // use the default coolant off command when an 'off' value is not specified
} else {
coolantOff = coolantCodes.off;
m = coolantCodes.on;
}
if (!m) {
onUnsupportedCoolant(coolant);
m = 9;
} else {
if (Array.isArray(m)) {
for (var i in m) {
multipleCoolantBlocks.push(m[i]);
}
} else {
multipleCoolantBlocks.push(m);
}
currentCoolantMode = coolant;
for (var i in multipleCoolantBlocks) {
if (typeof multipleCoolantBlocks[i] == "number") {
multipleCoolantBlocks[i] = mFormat.format(multipleCoolantBlocks[i]);
}
}
if (format == undefined || format) {
return multipleCoolantBlocks; // return the single formatted coolant value
} else {
return m; // return unformatted coolant value
}
}
return undefined;
}
// <<<<< INCLUDED FROM include_files/coolant.cpi
// >>>>> INCLUDED FROM include_files/writeProgramHeader.cpi
properties.writeMachine = {
title : "Write machine",
description: "Output the machine settings in the header of the program.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
};
properties.writeTools = {
title : "Write tool list",
description: "Output a tool list in the header of the program.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
};
function writeProgramHeader() {
// dump machine configuration
var vendor = machineConfiguration.getVendor();
var model = machineConfiguration.getModel();
var mDescription = machineConfiguration.getDescription();
if (getProperty("writeMachine") && (vendor || model || mDescription)) {
writeComment(localize("Machine"));
if (vendor) {
writeComment(" " + localize("vendor") + ": " + vendor);
}
if (model) {
writeComment(" " + localize("model") + ": " + model);
}
if (mDescription) {
writeComment(" " + localize("description") + ": " + mDescription);
}
}
// dump tool information
if (getProperty("writeTools")) {
if (false) { // set to true to use the post kernel version of the tool list
writeToolTable(TOOL_NUMBER_COL);
} else {
var zRanges = {};
if (is3D()) {
var numberOfSections = getNumberOfSections();
for (var i = 0; i < numberOfSections; ++i) {
var section = getSection(i);
var zRange = section.getGlobalZRange();
var tool = section.getTool();
if (zRanges[tool.number]) {
zRanges[tool.number].expandToRange(zRange);
} else {
zRanges[tool.number] = zRange;
}
}
}
var tools = getToolTable();
if (tools.getNumberOfTools() > 0) {
for (var i = 0; i < tools.getNumberOfTools(); ++i) {
var tool = tools.getTool(i);
var comment = (getProperty("toolAsName") ? "\"" + tool.description.toUpperCase() + "\"" : "T" + toolFormat.format(tool.number)) + " " +
"D=" + xyzFormat.format(tool.diameter) + " " +
localize("CR") + "=" + xyzFormat.format(tool.cornerRadius);
if ((tool.taperAngle > 0) && (tool.taperAngle < Math.PI)) {
comment += " " + localize("TAPER") + "=" + taperFormat.format(tool.taperAngle) + localize("deg");
}
if (zRanges[tool.number]) {
comment += " - " + localize("ZMIN") + "=" + xyzFormat.format(zRanges[tool.number].getMinimum());
}
comment += " - " + getToolTypeName(tool.type);
writeComment(comment);
}
}
}
}
}
// <<<<< INCLUDED FROM include_files/writeProgramHeader.cpi
// >>>>> INCLUDED FROM include_files/onRapid_fanuc.cpi
function onRapid(_x, _y, _z) {
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
if (x || y || z) {
if (pendingRadiusCompensation >= 0) {
error(localize("Radius compensation mode cannot be changed at rapid traversal."));
return;
}
writeBlock(gMotionModal.format(0), x, y, z);
forceFeed();
}
}
// <<<<< INCLUDED FROM include_files/onRapid_fanuc.cpi
// >>>>> INCLUDED FROM include_files/onLinear_fanuc.cpi
function onLinear(_x, _y, _z, feed) {
if (pendingRadiusCompensation >= 0) {
xOutput.reset();
yOutput.reset();
}
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
var f = getFeed(feed);
if (x || y || z) {
if (pendingRadiusCompensation >= 0) {
pendingRadiusCompensation = -1;
var d = getSetting("outputToolDiameterOffset", true) ? diameterOffsetFormat.format(tool.diameterOffset) : "";
writeBlock(gPlaneModal.format(17));
switch (radiusCompensation) {
case RADIUS_COMPENSATION_LEFT:
writeBlock(gMotionModal.format(1), gFormat.format(41), x, y, z, d, f);
break;
case RADIUS_COMPENSATION_RIGHT:
writeBlock(gMotionModal.format(1), gFormat.format(42), x, y, z, d, f);
break;
default:
writeBlock(gMotionModal.format(1), gFormat.format(40), x, y, z, f);
}
} else {
writeBlock(gMotionModal.format(1), x, y, z, f);
}
} else if (f) {
if (getNextRecord().isMotion()) { // try not to output feed without motion
forceFeed(); // force feed on next line
} else {
writeBlock(gMotionModal.format(1), f);
}
}
}
// <<<<< INCLUDED FROM include_files/onLinear_fanuc.cpi
// >>>>> INCLUDED FROM include_files/writeRetract_fanuc.cpi
function writeRetract() {
var retract = getRetractParameters.apply(this, arguments);
if (retract && retract.words.length > 0) {
if (typeof cancelWCSRotation == "function" && getSetting("retract.cancelRotationOnRetracting", false)) { // cancel rotation before retracting
cancelWCSRotation();
}
if (typeof disableLengthCompensation == "function" && getSetting("allowCancelTCPBeforeRetracting", false) && state.tcpIsActive) {
disableLengthCompensation(); // cancel TCP before retracting
}
for (var i in retract.words) {
var words = retract.singleLine ? retract.words : retract.words[i];
switch (retract.method) {
case "G28":
forceModals(gMotionModal, gAbsIncModal);
writeBlock(gFormat.format(28), gAbsIncModal.format(91), words);
writeBlock(gAbsIncModal.format(90));
break;
case "G30":
forceModals(gMotionModal, gAbsIncModal);
writeBlock(gFormat.format(30), gAbsIncModal.format(91), words);
writeBlock(gAbsIncModal.format(90));
break;
case "G53":
forceModals(gMotionModal);
writeBlock(gAbsIncModal.format(90), gFormat.format(53), gMotionModal.format(0), words);
break;
default:
if (typeof writeRetractCustom == "function") {
writeRetractCustom(retract);
return;
} else {
error(subst(localize("Unsupported safe position method '%1'"), retract.method));
}
}
machineSimulation({
x : retract.singleLine || words.indexOf("X") != -1 ? retract.positions.x : undefined,
y : retract.singleLine || words.indexOf("Y") != -1 ? retract.positions.y : undefined,
z : retract.singleLine || words.indexOf("Z") != -1 ? retract.positions.z : undefined,
coordinates: MACHINE
});
if (retract.singleLine) {
break;
}
}
}
}
// <<<<< INCLUDED FROM include_files/writeRetract_fanuc.cpi
properties.writeTools.value = false;