/**
Copyright (C) 2012-2024 by Autodesk, Inc.
All rights reserved.
Onefinity post processor configuration.
$Revision: 44145 4f7aaa6c97df2d49db23603652fb3cf23f709aa1 $
$Date: 2024-09-19 10:09:13 $
FORKID {1467B300-821C-4276-88D6-2DAED8EC5C9E}
*/
description = "Onefinity";
vendor = "Kirbre Enterprises Inc.";
vendorUrl = "https://www.onefinitycnc.com/";
// >>>>> INCLUDED FROM ../common/buildbotics mill.cps
if (!description) {
description = "Buildbotics controller";
}
legal = "Copyright (C) 2012-2024 by Autodesk, Inc.";
certificationLevel = 2;
minimumRevision = 45917;
if (!longDescription) {
longDescription = subst("Generic post for %1", description);
}
extension = "nc";
setCodePage("ascii");
capabilities = CAPABILITY_MILLING | CAPABILITY_MACHINE_SIMULATION;
tolerance = spatial(0.002, MM);
minimumChordLength = spatial(0.25, MM);
minimumCircularRadius = spatial(0.01, MM);
maximumCircularRadius = spatial(1000, MM);
minimumCircularSweep = toRad(0.01);
maximumCircularSweep = toRad(180);
allowHelicalMoves = true;
allowedCircularPlanes = 0; // disable all circular interpolation
highFeedrate = (unit == MM) ? 5000 : 200;
// user-defined properties
properties = {
preloadTool: {
title : "Preload tool",
description: "Preloads the next tool at a tool change (if any).",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
},
showSequenceNumbers: {
title : "Use sequence numbers",
description: "'Yes' outputs sequence numbers on each block, 'Only on tool change' outputs sequence numbers on tool change blocks only, and 'No' disables the output of sequence numbers.",
group : "formats",
type : "enum",
values : [
{title:"Yes", id:"true"},
{title:"No", id:"false"},
{title:"Only on tool change", id:"toolChange"}
],
value: "true",
scope: "post"
},
sequenceNumberStart: {
title : "Start sequence number",
description: "The number at which to start the sequence numbers.",
group : "formats",
type : "integer",
value : 10,
scope : "post"
},
sequenceNumberIncrement: {
title : "Sequence number increment",
description: "The amount by which the sequence number is incremented by in each block.",
group : "formats",
type : "integer",
value : 5,
scope : "post"
},
optionalStop: {
title : "Optional stop",
description: "Outputs optional stop code during when necessary in the code.",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
},
separateWordsWithSpace: {
title : "Separate words with space",
description: "Adds spaces between words if 'yes' is selected.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
},
useM06: {
title : "Output M6",
description: "Disable to disallow the output of M6 on tool changes.",
group : "preferences",
type : "boolean",
value : true,
scope : "post"
},
safePositionMethod: {
title : "Safe Retracts",
description: "Select your desired retract option. 'Clearance Height' retracts to the operation clearance height.",
group : "homePositions",
type : "enum",
values : [
{title:"G28", id:"G28"},
{title:"G53", id:"G53"},
{title:"Clearance Height", id:"clearanceHeight"}
],
value: "G53",
scope: "post"
},
rotaryTableAxis: {
title : "Rotary table axis",
description: "Select rotary table axis. Check the table direction on the machine and use the (Reversed) selection if the table is moving in the opposite direction.",
group : "configuration",
type : "enum",
values : [
{title:"No rotary", id:"none"},
{title:"X", id:"x"},
{title:"Y", id:"y"},
{title:"Z", id:"z"},
{title:"X (Reversed)", id:"-x"},
{title:"Y (Reversed)", id:"-y"},
{title:"Z (Reversed)", id:"-z"}
],
value: "none",
scope: "post"
},
useCoolant: {
title : "Use coolant",
description: "Specifies that coolant commands should be output",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
},
useCircularInterpolation: {
title : "Circular interpolation",
description: "Output arcs as linear moves when set to No.",
group : "preferences",
type : "boolean",
value : false,
scope : "post"
}
};
// wcs definiton
wcsDefinitions = {
useZeroOffset: false,
wcs : [
{name:"Standard", format:"G", range:[54, 59]},
{name:"Extended", format:"G59.", range:[1, 3]}
]
};
var gFormat = createFormat({prefix:"G", decimals:1});
var mFormat = createFormat({prefix:"M", decimals:1});
var hFormat = createFormat({prefix:"H", decimals:1});
var dFormat = createFormat({prefix:"D", decimals:1});
var xyzFormat = createFormat({decimals:(unit == MM ? 3 : 4)});
var abcFormat = createFormat({decimals:3, type:FORMAT_REAL, scale:DEG});
var feedFormat = createFormat({decimals:(unit == MM ? 1 : 2)});
var toolFormat = createFormat({decimals:0});
var rpmFormat = createFormat({decimals:0});
var secFormat = createFormat({decimals:3, type:FORMAT_REAL}); // seconds - range 0.001-1000
var taperFormat = createFormat({decimals:1, scale:DEG});
var xOutput = createOutputVariable({onchange:function() {state.retractedX = false;}, prefix:"X"}, xyzFormat);
var yOutput = createOutputVariable({onchange:function() {state.retractedY = false;}, prefix:"Y"}, xyzFormat);
var zOutput = createOutputVariable({onchange:function() {state.retractedZ = false;}, prefix:"Z"}, xyzFormat);
var aOutput = createOutputVariable({prefix:"A"}, abcFormat);
var bOutput = createOutputVariable({prefix:"B"}, abcFormat);
var cOutput = createOutputVariable({prefix:"C"}, abcFormat);
var feedOutput = createOutputVariable({prefix:"F"}, feedFormat);
var sOutput = createOutputVariable({prefix:"S", control:CONTROL_FORCE}, rpmFormat);
var dOutput = createOutputVariable({}, dFormat);
// circular output
var iOutput = createOutputVariable({prefix:"I", control:CONTROL_FORCE}, xyzFormat);
var jOutput = createOutputVariable({prefix:"J", control:CONTROL_FORCE}, xyzFormat);
var kOutput = createOutputVariable({prefix:"K", control:CONTROL_FORCE}, xyzFormat);
var gMotionModal = createOutputVariable({}, gFormat); // modal group 1 // G0-G3, ...
var gPlaneModal = createOutputVariable({onchange:function () {gMotionModal.reset();}}, gFormat); // modal group 2 // G17-19
var gAbsIncModal = createOutputVariable({}, gFormat); // modal group 3 // G90-91
var gFeedModeModal = createOutputVariable({}, gFormat); // modal group 5 // G93-94
var gUnitModal = createOutputVariable({}, gFormat); // modal group 6 // G20-21
var gCycleModal = createOutputVariable({}, gFormat); // modal group 9 // G81, ...
var gRetractModal = createOutputVariable({}, gFormat); // modal group 10 // G98-99
var settings = {
coolant: {
// samples:
// {id: COOLANT_THROUGH_TOOL, on: 88, off: 89}
// {id: COOLANT_THROUGH_TOOL, on: [8, 88], off: [9, 89]}
// {id: COOLANT_THROUGH_TOOL, on: "M88 P3 (myComment)", off: "M89"}
coolants: [
{id:COOLANT_FLOOD, on:8},
{id:COOLANT_MIST, on:7},
{id:COOLANT_THROUGH_TOOL},
{id:COOLANT_AIR},
{id:COOLANT_AIR_THROUGH_TOOL},
{id:COOLANT_SUCTION},
{id:COOLANT_FLOOD_MIST},
{id:COOLANT_FLOOD_THROUGH_TOOL},
{id:COOLANT_OFF, off:9}
],
singleLineCoolant: false, // specifies to output multiple coolant codes in one line rather than in separate lines
},
retract: {
cancelRotationOnRetracting: false, // specifies that rotations (G68) need to be canceled prior to retracting
methodXY : undefined, // special condition, overwrite retract behavior per axis
methodZ : undefined, // special condition, overwrite retract behavior per axis
useZeroValues : ["G28", "G30"], // enter property value id(s) for using "0" value instead of machineConfiguration axes home position values (ie G30 Z0)
homeXY : {onIndexing:false, onToolChange:false, onProgramEnd:{axes:[X, Y]}} // Specifies when XY should be homed in XY (sample: onIndexing:[X,Y]). Options can be combined
},
machineAngles: { // refer to https://cam.autodesk.com/posts/reference/classMachineConfiguration.html#a14bcc7550639c482492b4ad05b1580c8
controllingAxis: ABC,
type : PREFER_PREFERENCE,
options : ENABLE_ALL
},
workPlaneMethod: {
useTiltedWorkplane : false, // specifies that tilted workplanes should be used (ie. G68.2, G254, PLANE SPATIAL, CYCLE800), can be overwritten by property
eulerConvention : EULER_ZXZ_R, // specifies the euler convention (ie EULER_XYZ_R), set to undefined to use machine angles for TWP commands ('undefined' requires machine configuration)
eulerCalculationMethod: "standard", // ('standard' / 'machine') 'machine' adjusts euler angles to match the machines ABC orientation, machine configuration required
cancelTiltFirst : true, // cancel tilted workplane prior to WCS (G54-G59) blocks
useABCPrepositioning : false, // position ABC axes prior to tilted workplane blocks
forceMultiAxisIndexing: false, // force multi-axis indexing for 3D programs
optimizeType : undefined // can be set to OPTIMIZE_NONE, OPTIMIZE_BOTH, OPTIMIZE_TABLES, OPTIMIZE_HEADS, OPTIMIZE_AXIS. 'undefined' uses legacy rotations
},
comments: {
permittedCommentChars: " abcdefghijklmnopqrstuvwxyz0123456789.,=_-:()", // letters are not case sensitive, use option 'outputFormat' below. Set to 'undefined' to allow any character
prefix : "(", // specifies the prefix for the comment
suffix : ")", // specifies the suffix for the comment
outputFormat : "upperCase", // can be set to "upperCase", "lowerCase" and "ignoreCase". Set to "ignoreCase" to write comments without upper/lower case formatting
maximumLineLength : 80 // the maximum number of characters allowed in a line, set to 0 to disable comment output
},
maximumSequenceNumber : undefined, // the maximum sequence number (Nxxx), use 'undefined' for unlimited
supportsOptionalBlocks : false, // specifies if optional block output is supported
// fixed settings below, do not modify
supportsTCP : false, // this postprocessor does not support TCP
supportsInverseTimeFeed : false, // this postprocessor does not support inverse time feedrates
supportsRadiusCompensation: false // this postprocessor does not support tool radius compensation
};
var compensateToolLength = false; // add the tool length to the pivot distance for nonTCP rotary heads
function defineMachine() {
var useTCP = false;
if (getProperty("rotaryTableAxis") != "none") {
if (receivedMachineConfiguration) {
error(localize("You can only select either a machine in the CAM setup or use the properties to define your kinematics."));
return;
}
// Define rotary attributes from properties
var rotary = parseChoice(getProperty("rotaryTableAxis"), "-Z", "-Y", "-X", "NONE", "X", "Y", "Z");
if (rotary < 0) {
error(localize("Valid rotaryTableAxis values are: None, X, Y, Z, -X, -Y, -Z"));
return;
}
rotary -= 3;
// Define Master (carrier) axis
var masterAxis = Math.abs(rotary) - 1;
if (masterAxis >= 0) {
var rotaryVector = [0, 0, 0];
rotaryVector[masterAxis] = rotary / Math.abs(rotary);
var aAxis;
if (getProperty("useTableDirectionCodes")) {
aAxis = createAxis({coordinate:0, table:true, axis:rotaryVector, cyclic:true, range:[0, 360], preference:0, tcp:useTCP});
} else {
aAxis = createAxis({coordinate:0, table:true, axis:rotaryVector, cyclic:true, preference:0, tcp:useTCP});
}
machineConfiguration = new MachineConfiguration(aAxis);
setMachineConfiguration(machineConfiguration);
}
}
if (!receivedMachineConfiguration) {
// multiaxis settings
if (machineConfiguration.isHeadConfiguration()) {
machineConfiguration.setVirtualTooltip(false); // translate the pivot point to the virtual tool tip for nonTCP rotary heads
}
// retract / reconfigure
var performRewinds = false; // set to true to enable the rewind/reconfigure logic
if (performRewinds) {
machineConfiguration.enableMachineRewinds(); // enables the retract/reconfigure logic
safeRetractDistance = (unit == IN) ? 1 : 25; // additional distance to retract out of stock, can be overridden with a property
safeRetractFeed = (unit == IN) ? 20 : 500; // retract feed rate
safePlungeFeed = (unit == IN) ? 10 : 250; // plunge feed rate
machineConfiguration.setSafeRetractDistance(safeRetractDistance);
machineConfiguration.setSafeRetractFeedrate(safeRetractFeed);
machineConfiguration.setSafePlungeFeedrate(safePlungeFeed);
var stockExpansion = new Vector(toPreciseUnit(0.1, IN), toPreciseUnit(0.1, IN), toPreciseUnit(0.1, IN)); // expand stock XYZ values
machineConfiguration.setRewindStockExpansion(stockExpansion);
}
// multi-axis feedrates
if (machineConfiguration.isMultiAxisConfiguration()) {
machineConfiguration.setMultiAxisFeedrate(
useTCP ? FEED_FPM : FEED_DPM,
99999.9999, // maximum output value for inverse time feed rates
INVERSE_MINUTES, // INVERSE_MINUTES/INVERSE_SECONDS or DPM_COMBINATION/DPM_STANDARD
0.5, // tolerance to determine when the DPM feed has changed
unit == MM ? 1.0 : 0.1 // ratio of rotary accuracy to linear accuracy for DPM calculations
);
setMachineConfiguration(machineConfiguration);
}
/* home positions */
// machineConfiguration.setHomePositionX(toPreciseUnit(0, IN));
// machineConfiguration.setHomePositionY(toPreciseUnit(0, IN));
// machineConfiguration.setRetractPlane(toPreciseUnit(0, IN));
}
}
/**
Compare a text string to acceptable choices.
Returns -1 if there is no match.
*/
function parseChoice() {
for (var i = 1; i < arguments.length; ++i) {
if (String(arguments[0]).toUpperCase() == String(arguments[i]).toUpperCase()) {
return i - 1;
}
}
return -1;
}
function onOpen() {
// define and enable machine configuration
receivedMachineConfiguration = machineConfiguration.isReceived();
if (typeof defineMachine == "function") {
defineMachine(); // hardcoded machine configuration
}
activateMachine(); // enable the machine optimizations and settings
if (getProperty("useCircularInterpolation")) {
allowedCircularPlanes = undefined; // Allow circular interpolation in all three planes
}
if (!getProperty("separateWordsWithSpace")) {
setWordSeparator("");
}
writeln("%");
writeComment(programName);
writeComment(programComment);
writeProgramHeader();
// absolute coordinates, feed per min, and incremental arc center mode
writeBlock(gAbsIncModal.format(90), gFeedModeModal.format(94), gPlaneModal.format(17), gFormat.format(91.1));
writeBlock(gUnitModal.format(unit == MM ? 21 : 20));
validateCommonParameters();
}
function onSection() {
var forceSectionRestart = optionalSection && !currentSection.isOptional();
optionalSection = currentSection.isOptional();
var insertToolCall = isToolChangeNeeded("number") || forceSectionRestart;
var newWorkOffset = isNewWorkOffset() || forceSectionRestart;
var newWorkPlane = isNewWorkPlane() || forceSectionRestart;
if (insertToolCall || newWorkOffset || newWorkPlane) {
// stop spindle before retract during tool change
if (insertToolCall && !isFirstSection()) {
onCommand(COMMAND_STOP_SPINDLE);
}
writeRetract(Z); // retract to safe plane
}
writeln("");
writeComment(getParameter("operation-comment", ""));
// tool change
writeToolCall(tool, insertToolCall);
startSpindle(tool, insertToolCall);
// Output modal commands here
writeBlock(gPlaneModal.format(17), gAbsIncModal.format(90), gFeedModeModal.format(94));
// set wcs
var wcsIsRequired = true;
if (insertToolCall) {
currentWorkOffset = undefined; // force work offset when changing tool
wcsIsRequired = newWorkOffset || insertToolCall;
}
writeWCS(currentSection, wcsIsRequired);
forceXYZ();
var abc = defineWorkPlane(currentSection, true);
setCoolant(tool.coolant); // writes the required coolant codes
forceAny();
// prepositioning
var initialPosition = getFramePosition(currentSection.getInitialPosition());
var isRequired = insertToolCall || state.retractedZ || !state.lengthCompensationActive || (!isFirstSection() && getPreviousSection().isMultiAxis());
writeInitialPositioning(initialPosition, isRequired);
}
function onDwell(seconds) {
var maxValue = 99999.999;
if (seconds > maxValue) {
warning(subst(localize("Dwelling time of '%1' exceeds the maximum value of '%2' in operation '%3'"), seconds, maxValue, getParameter("operation-comment", "")));
}
seconds = clamp(0.001, seconds, 99999.999);
writeBlock(gFormat.format(4), "P" + secFormat.format(seconds));
}
function onSpindleSpeed(spindleSpeed) {
writeBlock(sOutput.format(spindleSpeed));
}
function onCycle() {
writeBlock(gPlaneModal.format(17));
}
function getCommonCycle(x, y, z, r) {
forceXYZ(); // force xyz on first drill hole of any cycle
return [xOutput.format(x), yOutput.format(y),
zOutput.format(z),
"R" + xyzFormat.format(r)];
}
function onCyclePoint(x, y, z) {
if (!isSameDirection(machineConfiguration.getSpindleAxis(), getForwardDirection(currentSection))) {
expandCyclePoint(x, y, z);
return;
}
if (isFirstCyclePoint() || isProbeOperation()) {
var value;
var offset;
if (!isProbeOperation()) {
// return to initial Z which is clearance plane and set absolute mode
repositionToCycleClearance(cycle, x, y, z);
} else {
if (isProbeOperation()) {
value = (cycle.approach1 == "positive") ? 1 : -1;
offset = cycle.probeClearance + tool.diameter / 2;
}
}
// return to initial Z which is clearance plane and set absolute mode
var F = cycle.feedrate;
var P = !cycle.dwell ? 0 : clamp(0.001, cycle.dwell, 99999999); // in seconds
switch (cycleType) {
case "drilling":
writeBlock(
gRetractModal.format(98), gAbsIncModal.format(90), gCycleModal.format(81),
getCommonCycle(x, y, z, cycle.retract),
feedOutput.format(F)
);
break;
case "counter-boring":
if (P > 0) {
writeBlock(
gRetractModal.format(98), gAbsIncModal.format(90), gCycleModal.format(82),
getCommonCycle(x, y, z, cycle.retract),
"P" + secFormat.format(P),
feedOutput.format(F)
);
} else {
writeBlock(
gRetractModal.format(98), gAbsIncModal.format(90), gCycleModal.format(81),
getCommonCycle(x, y, z, cycle.retract),
feedOutput.format(F)
);
}
break;
case "reaming":
if (feedFormat.getResultingValue(cycle.feedrate) != feedFormat.getResultingValue(cycle.retractFeedrate)) {
expandCyclePoint(x, y, z);
break;
}
if (P > 0) {
writeBlock(
gRetractModal.format(98), gAbsIncModal.format(90), gCycleModal.format(89),
getCommonCycle(x, y, z, cycle.retract),
"P" + secFormat.format(P),
feedOutput.format(F)
);
} else {
writeBlock(
gRetractModal.format(98), gAbsIncModal.format(90), gCycleModal.format(85),
getCommonCycle(x, y, z, cycle.retract),
feedOutput.format(F)
);
}
break;
case "stop-boring":
writeBlock(
gRetractModal.format(98), gAbsIncModal.format(90), gCycleModal.format(86),
getCommonCycle(x, y, z, cycle.retract),
conditional(P > 0, "P" + secFormat.format(P)),
feedOutput.format(F)
);
break;
case "boring":
if (feedFormat.getResultingValue(cycle.feedrate) != feedFormat.getResultingValue(cycle.retractFeedrate)) {
expandCyclePoint(x, y, z);
break;
}
if (P > 0) {
writeBlock(
gRetractModal.format(98), gAbsIncModal.format(90), gCycleModal.format(89),
getCommonCycle(x, y, z, cycle.retract),
"P" + secFormat.format(P), // not optional
feedOutput.format(F)
);
} else {
writeBlock(
gRetractModal.format(98), gAbsIncModal.format(90), gCycleModal.format(85),
getCommonCycle(x, y, z, cycle.retract),
feedOutput.format(F)
);
}
break;
case "probing-x":
writeComment(cycleType);
writeBlock(gMotionModal.format(0), "Z" + xyzFormat.format(-tool.diameter / 2));
writeBlock(gAbsIncModal.format(91));
writeBlock(gFormat.format(38.2), "X" + xyzFormat.format(value * (cycle.retract + cycle.probeOvertravel)), feedOutput.format(F));
writeBlock(gFormat.format(92), "X" + xyzFormat.format(x + value * (offset - tool.diameter / 2)));
writeBlock(gAbsIncModal.format(90));
writeBlock(gMotionModal.format(0), "Z" + xyzFormat.format(cycle.retract));
writeBlock(gMotionModal.format(0), "X" + xyzFormat.format(0), "Y" + xyzFormat.format(0));
break;
case "probing-y":
writeComment(cycleType);
writeBlock(gMotionModal.format(0), "Z" + xyzFormat.format(-tool.diameter / 2));
writeBlock(gAbsIncModal.format(91));
writeBlock(gFormat.format(38.2), "Y" + xyzFormat.format(value * (cycle.retract + cycle.probeOvertravel)), feedOutput.format(F));
writeBlock(gFormat.format(92), "Y" + xyzFormat.format(y + value * (offset - tool.diameter / 2)));
writeBlock(gAbsIncModal.format(90));
writeBlock(gMotionModal.format(0), "Z" + xyzFormat.format(cycle.retract));
writeBlock(gMotionModal.format(0), "X" + xyzFormat.format(0), "Y" + xyzFormat.format(0));
break;
case "probing-z":
writeComment(cycleType);
writeBlock(gMotionModal.format(0), "Z" + xyzFormat.format(cycle.retract));
writeBlock(gAbsIncModal.format(91));
writeBlock(gFormat.format(38.2), "Z" + xyzFormat.format(-cycle.retract - cycle.probeOvertravel), feedOutput.format(F));
writeBlock(gFormat.format(92), "Z" + xyzFormat.format(0));
writeBlock(gAbsIncModal.format(90));
writeBlock(gMotionModal.format(0), "Z" + xyzFormat.format(cycle.retract));
writeBlock(gMotionModal.format(0), "X" + xyzFormat.format(0), "Y" + xyzFormat.format(0));
break;
case "probing-xy-outer-corner":
writeComment(cycleType);
var value2 = (cycle.approach2 == "positive") ? 1 : -1;
writeComment("probing x");
writeBlock(gMotionModal.format(0), "Z" + xyzFormat.format(cycle.retract));
writeBlock(gMotionModal.format(0), "Y" + xyzFormat.format(y + value2 * (2 * offset)));
writeBlock(gMotionModal.format(1), "Z" + xyzFormat.format(-tool.diameter / 2));
writeBlock(gAbsIncModal.format(91));
writeBlock(gCycleModal.format(38.2), "X" + xyzFormat.format(value * (offset + cycle.probeOvertravel)), feedOutput.format(F));
writeBlock(gFormat.format(92), "X" + xyzFormat.format((x + value * (offset - tool.diameter / 2))));
writeBlock(gAbsIncModal.format(90));
writeBlock(gMotionModal.format(0), "Z" + xyzFormat.format(cycle.retract));
writeBlock(gMotionModal.format(0), "Y" + xyzFormat.format(y));
writeComment("probing y");
writeBlock(gMotionModal.format(0), "X" + xyzFormat.format(x + value * (2 * offset)));
writeBlock(gMotionModal.format(1), "Z" + xyzFormat.format(-tool.diameter / 2));
writeBlock(gAbsIncModal.format(91));
writeBlock(gCycleModal.format(38.2), "Y" + xyzFormat.format(value2 * (offset + cycle.probeOvertravel)), feedOutput.format(F));
writeBlock(gFormat.format(92), "Y" + xyzFormat.format(y + value2 * (offset - tool.diameter / 2)));
writeBlock(gAbsIncModal.format(90));
writeBlock(gMotionModal.format(0), "Z" + xyzFormat.format(cycle.retract));
writeBlock(gMotionModal.format(0), "X" + xyzFormat.format(x + value * offset), "Y" + xyzFormat.format(y + value2 * offset));
break;
default:
expandCyclePoint(x, y, z);
}
} else {
if (cycleExpanded) {
expandCyclePoint(x, y, z);
} else {
var _x = xOutput.format(x);
var _y = yOutput.format(y);
var _z = zOutput.format(z);
if (!_x && !_y && !_z) {
switch (gPlaneModal.getCurrent()) {
case 17: // XY
xOutput.reset(); // at least one axis is required
_x = xOutput.format(x);
break;
case 18: // ZX
zOutput.reset(); // at least one axis is required
_z = zOutput.format(z);
break;
case 19: // YZ
yOutput.reset(); // at least one axis is required
_y = yOutput.format(y);
break;
}
}
writeBlock(_x, _y, _z);
}
}
}
function onCycleEnd() {
if (!cycleExpanded && !isProbeOperation()) {
writeBlock(gCycleModal.format(80));
zOutput.reset();
}
}
var mapCommand = {
COMMAND_END : 2,
COMMAND_STOP_SPINDLE : 5,
COMMAND_ORIENTATE_SPINDLE: 19
};
function onCommand(command) {
switch (command) {
case COMMAND_COOLANT_OFF:
setCoolant(COOLANT_OFF);
return;
case COMMAND_COOLANT_ON:
setCoolant(tool.coolant);
return;
case COMMAND_STOP:
writeBlock(mFormat.format(0));
forceSpindleSpeed = true;
forceCoolant = true;
return;
case COMMAND_OPTIONAL_STOP:
writeBlock(mFormat.format(1));
forceSpindleSpeed = true;
forceCoolant = true;
return;
case COMMAND_START_SPINDLE:
forceSpindleSpeed = false;
writeBlock(sOutput.format(spindleSpeed), mFormat.format(tool.clockwise ? 3 : 4));
return;
case COMMAND_LOAD_TOOL:
if (!isFirstSection()) {
writeToolBlock("T" + toolFormat.format(tool.number), conditional(getProperty("useM06"), mFormat.format(6)));
} else {
writeToolBlock(formatComment("T" + toolFormat.format(tool.number)));
}
writeComment(tool.comment);
var preloadTool = getNextTool(tool.number != getFirstTool().number);
if (getProperty("preloadTool") && getProperty("useM06") && preloadTool) {
writeBlock("T" + toolFormat.format(preloadTool.number)); // preload next/first tool
}
return;
case COMMAND_LOCK_MULTI_AXIS:
return;
case COMMAND_UNLOCK_MULTI_AXIS:
return;
case COMMAND_BREAK_CONTROL:
return;
case COMMAND_TOOL_MEASURE:
return;
case COMMAND_PROBE_ON:
return;
case COMMAND_PROBE_OFF:
return;
}
var stringId = getCommandStringId(command);
var mcode = mapCommand[stringId];
if (mcode != undefined) {
writeBlock(mFormat.format(mcode));
} else {
onUnsupportedCommand(command);
}
}
function onSectionEnd() {
writeBlock(gPlaneModal.format(17));
if (!isLastSection()) {
if (getNextSection().getTool().coolant != tool.coolant) {
setCoolant(COOLANT_OFF);
}
if (tool.breakControl && isToolChangeNeeded(getNextSection(), getProperty("toolAsName") ? "description" : "number")) {
onCommand(COMMAND_BREAK_CONTROL);
}
}
forceAny();
}
function onClose() {
optionalSection = false;
onCommand(COMMAND_STOP_SPINDLE);
onCommand(COMMAND_COOLANT_OFF);
writeRetract(Z);
setWorkPlane(new Vector(0, 0, 0)); // reset working plane
if (getSetting("retract.homeXY.onProgramEnd", false)) {
writeRetract(settings.retract.homeXY.onProgramEnd);
}
writeBlock(mFormat.format(30)); // stop program, spindle stop, coolant off
writeln("%");
}
// >>>>> INCLUDED FROM include_files/commonFunctions.cpi
// internal variables, do not change
var receivedMachineConfiguration;
var tcp = {isSupportedByControl:getSetting("supportsTCP", true), isSupportedByMachine:false, isSupportedByOperation:false};
var state = {
retractedX : false, // specifies that the machine has been retracted in X
retractedY : false, // specifies that the machine has been retracted in Y
retractedZ : false, // specifies that the machine has been retracted in Z
tcpIsActive : false, // specifies that TCP is currently active
twpIsActive : false, // specifies that TWP is currently active
lengthCompensationActive: !getSetting("outputToolLengthCompensation", true), // specifies that tool length compensation is active
mainState : true // specifies the current context of the state (true = main, false = optional)
};
var validateLengthCompensation = getSetting("outputToolLengthCompensation", true); // disable validation when outputToolLengthCompensation is disabled
var multiAxisFeedrate;
var sequenceNumber;
var optionalSection = false;
var currentWorkOffset;
var forceSpindleSpeed = false;
var operationNeedsSafeStart = false; // used to convert blocks to optional for safeStartAllOperations
function activateMachine() {
// disable unsupported rotary axes output
if (!machineConfiguration.isMachineCoordinate(0) && (typeof aOutput != "undefined")) {
aOutput.disable();
}
if (!machineConfiguration.isMachineCoordinate(1) && (typeof bOutput != "undefined")) {
bOutput.disable();
}
if (!machineConfiguration.isMachineCoordinate(2) && (typeof cOutput != "undefined")) {
cOutput.disable();
}
// setup usage of useTiltedWorkplane
settings.workPlaneMethod.useTiltedWorkplane = getProperty("useTiltedWorkplane") != undefined ? getProperty("useTiltedWorkplane") :
getSetting("workPlaneMethod.useTiltedWorkplane", false);
settings.workPlaneMethod.useABCPrepositioning = getProperty("useABCPrepositioning") != undefined ? getProperty("useABCPrepositioning") :
getSetting("workPlaneMethod.useABCPrepositioning", false);
if (!machineConfiguration.isMultiAxisConfiguration()) {
return; // don't need to modify any settings for 3-axis machines
}
// identify if any of the rotary axes has TCP enabled
var axes = [machineConfiguration.getAxisU(), machineConfiguration.getAxisV(), machineConfiguration.getAxisW()];
tcp.isSupportedByMachine = axes.some(function(axis) {return axis.isEnabled() && axis.isTCPEnabled();}); // true if TCP is enabled on any rotary axis
// save multi-axis feedrate settings from machine configuration
var mode = machineConfiguration.getMultiAxisFeedrateMode();
var type = mode == FEED_INVERSE_TIME ? machineConfiguration.getMultiAxisFeedrateInverseTimeUnits() :
(mode == FEED_DPM ? machineConfiguration.getMultiAxisFeedrateDPMType() : DPM_STANDARD);
multiAxisFeedrate = {
mode : mode,
maximum : machineConfiguration.getMultiAxisFeedrateMaximum(),
type : type,
tolerance: mode == FEED_DPM ? machineConfiguration.getMultiAxisFeedrateOutputTolerance() : 0,
bpwRatio : mode == FEED_DPM ? machineConfiguration.getMultiAxisFeedrateBpwRatio() : 1
};
// setup of retract/reconfigure TAG: Only needed until post kernel supports these machine config settings
if (receivedMachineConfiguration && machineConfiguration.performRewinds()) {
safeRetractDistance = machineConfiguration.getSafeRetractDistance();
safePlungeFeed = machineConfiguration.getSafePlungeFeedrate();
safeRetractFeed = machineConfiguration.getSafeRetractFeedrate();
}
if (typeof safeRetractDistance == "number" && getProperty("safeRetractDistance") != undefined && getProperty("safeRetractDistance") != 0) {
safeRetractDistance = getProperty("safeRetractDistance");
}
if (machineConfiguration.isHeadConfiguration()) {
compensateToolLength = typeof compensateToolLength == "undefined" ? false : compensateToolLength;
}
if (machineConfiguration.isHeadConfiguration() && compensateToolLength) {
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (section.isMultiAxis()) {
machineConfiguration.setToolLength(getBodyLength(section.getTool())); // define the tool length for head adjustments
section.optimizeMachineAnglesByMachine(machineConfiguration, OPTIMIZE_AXIS);
}
}
} else {
optimizeMachineAngles2(OPTIMIZE_AXIS);
}
}
function getBodyLength(tool) {
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (tool.number == section.getTool().number) {
return section.getParameter("operation:tool_overallLength", tool.bodyLength + tool.holderLength);
}
}
return tool.bodyLength + tool.holderLength;
}
function getFeed(f) {
if (getProperty("useG95")) {
return feedOutput.format(f / spindleSpeed); // use feed value
}
if (typeof activeMovements != "undefined" && activeMovements) {
var feedContext = activeMovements[movement];
if (feedContext != undefined) {
if (!feedFormat.areDifferent(feedContext.feed, f)) {
if (feedContext.id == currentFeedId) {
return ""; // nothing has changed
}
forceFeed();
currentFeedId = feedContext.id;
return settings.parametricFeeds.feedOutputVariable + (settings.parametricFeeds.firstFeedParameter + feedContext.id);
}
}
currentFeedId = undefined; // force parametric feed next time
}
return feedOutput.format(f); // use feed value
}
function validateCommonParameters() {
validateToolData();
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (getSection(0).workOffset == 0 && section.workOffset > 0) {
if (!(typeof wcsDefinitions != "undefined" && wcsDefinitions.useZeroOffset)) {
error(localize("Using multiple work offsets is not possible if the initial work offset is 0."));
}
}
if (section.isMultiAxis()) {
if (!section.isOptimizedForMachine() &&
(!getSetting("workPlaneMethod.useTiltedWorkplane", false) || !getSetting("supportsToolVectorOutput", false))) {
error(localize("This postprocessor requires a machine configuration for 5-axis simultaneous toolpath."));
}
if (machineConfiguration.getMultiAxisFeedrateMode() == FEED_INVERSE_TIME && !getSetting("supportsInverseTimeFeed", true)) {
error(localize("This postprocessor does not support inverse time feedrates."));
}
if (getSetting("supportsToolVectorOutput", false) && !tcp.isSupportedByControl) {
error(localize("Incompatible postprocessor settings detected." + EOL +
"Setting 'supportsToolVectorOutput' requires setting 'supportsTCP' to be enabled as well."));
}
}
}
if (!tcp.isSupportedByControl && tcp.isSupportedByMachine) {
error(localize("The machine configuration has TCP enabled which is not supported by this postprocessor."));
}
if (getProperty("safePositionMethod") == "clearanceHeight") {
var msg = "-Attention- Property 'Safe Retracts' is set to 'Clearance Height'." + EOL +
"Ensure the clearance height will clear the part and or fixtures." + EOL +
"Raise the Z-axis to a safe height before starting the program.";
warning(msg);
writeComment(msg);
}
}
function validateToolData() {
var _default = 99999;
var _maximumSpindleRPM = machineConfiguration.getMaximumSpindleSpeed() > 0 ? machineConfiguration.getMaximumSpindleSpeed() :
settings.maximumSpindleRPM == undefined ? _default : settings.maximumSpindleRPM;
var _maximumToolNumber = machineConfiguration.isReceived() && machineConfiguration.getNumberOfTools() > 0 ? machineConfiguration.getNumberOfTools() :
settings.maximumToolNumber == undefined ? _default : settings.maximumToolNumber;
var _maximumToolLengthOffset = settings.maximumToolLengthOffset == undefined ? _default : settings.maximumToolLengthOffset;
var _maximumToolDiameterOffset = settings.maximumToolDiameterOffset == undefined ? _default : settings.maximumToolDiameterOffset;
var header = ["Detected maximum values are out of range.", "Maximum values:"];
var warnings = {
toolNumber : {msg:"Tool number value exceeds the maximum value for tool: " + EOL, max:" Tool number: " + _maximumToolNumber, values:[]},
lengthOffset : {msg:"Tool length offset value exceeds the maximum value for tool: " + EOL, max:" Tool length offset: " + _maximumToolLengthOffset, values:[]},
diameterOffset: {msg:"Tool diameter offset value exceeds the maximum value for tool: " + EOL, max:" Tool diameter offset: " + _maximumToolDiameterOffset, values:[]},
spindleSpeed : {msg:"Spindle speed exceeds the maximum value for operation: " + EOL, max:" Spindle speed: " + _maximumSpindleRPM, values:[]}
};
var toolIds = [];
for (var i = 0; i < getNumberOfSections(); ++i) {
var section = getSection(i);
if (toolIds.indexOf(section.getTool().getToolId()) === -1) { // loops only through sections which have a different tool ID
var toolNumber = section.getTool().number;
var lengthOffset = section.getTool().lengthOffset;
var diameterOffset = section.getTool().diameterOffset;
var comment = section.getParameter("operation-comment", "");
if (toolNumber > _maximumToolNumber && !getProperty("toolAsName")) {
warnings.toolNumber.values.push(SP + toolNumber + EOL);
}
if (lengthOffset > _maximumToolLengthOffset) {
warnings.lengthOffset.values.push(SP + "Tool " + toolNumber + " (" + comment + "," + " Length offset: " + lengthOffset + ")" + EOL);
}
if (diameterOffset > _maximumToolDiameterOffset) {
warnings.diameterOffset.values.push(SP + "Tool " + toolNumber + " (" + comment + "," + " Diameter offset: " + diameterOffset + ")" + EOL);
}
toolIds.push(section.getTool().getToolId());
}
// loop through all sections regardless of tool id for idenitfying spindle speeds
// identify if movement ramp is used in current toolpath, use ramp spindle speed for comparisons
var ramp = section.getMovements() & ((1 << MOVEMENT_RAMP) | (1 << MOVEMENT_RAMP_ZIG_ZAG) | (1 << MOVEMENT_RAMP_PROFILE) | (1 << MOVEMENT_RAMP_HELIX));
var _sectionSpindleSpeed = Math.max(section.getTool().spindleRPM, ramp ? section.getTool().rampingSpindleRPM : 0, 0);
if (_sectionSpindleSpeed > _maximumSpindleRPM) {
warnings.spindleSpeed.values.push(SP + section.getParameter("operation-comment", "") + " (" + _sectionSpindleSpeed + " RPM" + ")" + EOL);
}
}
// sort lists by tool number
warnings.toolNumber.values.sort(function(a, b) {return a - b;});
warnings.lengthOffset.values.sort(function(a, b) {return a.localeCompare(b);});
warnings.diameterOffset.values.sort(function(a, b) {return a.localeCompare(b);});
var warningMessages = [];
for (var key in warnings) {
if (warnings[key].values != "") {
header.push(warnings[key].max); // add affected max values to the header
warningMessages.push(warnings[key].msg + warnings[key].values.join(""));
}
}
if (warningMessages.length != 0) {
warningMessages.unshift(header.join(EOL) + EOL);
warning(warningMessages.join(EOL));
}
}
function forceFeed() {
currentFeedId = undefined;
feedOutput.reset();
}
/** Force output of X, Y, and Z. */
function forceXYZ() {
xOutput.reset();
yOutput.reset();
zOutput.reset();
}
/** Force output of A, B, and C. */
function forceABC() {
aOutput.reset();
bOutput.reset();
cOutput.reset();
}
/** Force output of X, Y, Z, A, B, C, and F on next output. */
function forceAny() {
forceXYZ();
forceABC();
forceFeed();
}
/**
Writes the specified block.
*/
function writeBlock() {
var text = formatWords(arguments);
if (!text) {
return;
}
var prefix = getSetting("sequenceNumberPrefix", "N");
var suffix = getSetting("writeBlockSuffix", "");
if ((optionalSection || skipBlocks) && !getSetting("supportsOptionalBlocks", true)) {
error(localize("Optional blocks are not supported by this post."));
}
if (getProperty("showSequenceNumbers") == "true") {
if (sequenceNumber == undefined || sequenceNumber >= settings.maximumSequenceNumber) {
sequenceNumber = getProperty("sequenceNumberStart");
}
if (optionalSection || skipBlocks) {
writeWords2("/", prefix + sequenceNumber, text + suffix);
} else {
writeWords2(prefix + sequenceNumber, text + suffix);
}
sequenceNumber += getProperty("sequenceNumberIncrement");
} else {
if (optionalSection || skipBlocks) {
writeWords2("/", text + suffix);
} else {
writeWords(text + suffix);
}
}
}
validate(settings.comments, "Setting 'comments' is required but not defined.");
function formatComment(text) {
var prefix = settings.comments.prefix;
var suffix = settings.comments.suffix;
var _permittedCommentChars = settings.comments.permittedCommentChars == undefined ? "" : settings.comments.permittedCommentChars;
switch (settings.comments.outputFormat) {
case "upperCase":
text = text.toUpperCase();
_permittedCommentChars = _permittedCommentChars.toUpperCase();
break;
case "lowerCase":
text = text.toLowerCase();
_permittedCommentChars = _permittedCommentChars.toLowerCase();
break;
case "ignoreCase":
_permittedCommentChars = _permittedCommentChars.toUpperCase() + _permittedCommentChars.toLowerCase();
break;
default:
error(localize("Unsupported option specified for setting 'comments.outputFormat'."));
}
if (_permittedCommentChars != "") {
text = filterText(String(text), _permittedCommentChars);
}
text = String(text).substring(0, settings.comments.maximumLineLength - prefix.length - suffix.length);
return text != "" ? prefix + text + suffix : "";
}
/**
Output a comment.
*/
function writeComment(text) {
if (!text) {
return;
}
var comments = String(text).split(EOL);
for (comment in comments) {
var _comment = formatComment(comments[comment]);
if (_comment) {
if (getSetting("comments.showSequenceNumbers", false)) {
writeBlock(_comment);
} else {
writeln(_comment);
}
}
}
}
function onComment(text) {
writeComment(text);
}
/**
Writes the specified block - used for tool changes only.
*/
function writeToolBlock() {
var show = getProperty("showSequenceNumbers");
setProperty("showSequenceNumbers", (show == "true" || show == "toolChange") ? "true" : "false");
writeBlock(arguments);
setProperty("showSequenceNumbers", show);
machineSimulation({/*x:toPreciseUnit(200, MM), y:toPreciseUnit(200, MM), coordinates:MACHINE,*/ mode:TOOLCHANGE}); // move machineSimulation to a tool change position
}
var skipBlocks = false;
var initialState = JSON.parse(JSON.stringify(state)); // save initial state
var optionalState = JSON.parse(JSON.stringify(state));
var saveCurrentSectionId = undefined;
function writeStartBlocks(isRequired, code) {
var saveSkipBlocks = skipBlocks;
var saveMainState = state; // save main state
if (!isRequired) {
if (!getProperty("safeStartAllOperations", false)) {
return; // when safeStartAllOperations is disabled, dont output code and return
}
if (saveCurrentSectionId != getCurrentSectionId()) {
saveCurrentSectionId = getCurrentSectionId();
forceModals(); // force all modal variables when entering a new section
optionalState = Object.create(initialState); // reset optionalState to initialState when entering a new section
}
skipBlocks = true; // if values are not required, but safeStartAllOperations is enabled - write following blocks as optional
state = optionalState; // set state to optionalState if skipBlocks is true
state.mainState = false;
}
code(); // writes out the code which is passed to this function as an argument
state = saveMainState; // restore main state
skipBlocks = saveSkipBlocks; // restore skipBlocks value
}
var pendingRadiusCompensation = -1;
function onRadiusCompensation() {
pendingRadiusCompensation = radiusCompensation;
if (pendingRadiusCompensation >= 0 && !getSetting("supportsRadiusCompensation", true)) {
error(localize("Radius compensation mode is not supported."));
return;
}
}
function onPassThrough(text) {
var commands = String(text).split(",");
for (text in commands) {
writeBlock(commands[text]);
}
}
function forceModals() {
if (arguments.length == 0) { // reset all modal variables listed below
if (typeof gMotionModal != "undefined") {
gMotionModal.reset();
}
if (typeof gPlaneModal != "undefined") {
gPlaneModal.reset();
}
if (typeof gAbsIncModal != "undefined") {
gAbsIncModal.reset();
}
if (typeof gFeedModeModal != "undefined") {
gFeedModeModal.reset();
}
} else {
for (var i in arguments) {
arguments[i].reset(); // only reset the modal variable passed to this function
}
}
}
/** Helper function to be able to use a default value for settings which do not exist. */
function getSetting(setting, defaultValue) {
var result = defaultValue;
var keys = setting.split(".");
var obj = settings;
for (var i in keys) {
if (obj[keys[i]] != undefined) { // setting does exist
result = obj[keys[i]];
if (typeof [keys[i]] === "object") {
obj = obj[keys[i]];
continue;
}
} else { // setting does not exist, use default value
if (defaultValue != undefined) {
result = defaultValue;
} else {
error("Setting '" + keys[i] + "' has no default value and/or does not exist.");
return undefined;
}
}
}
return result;
}
function getForwardDirection(_section) {
var forward = undefined;
var _optimizeType = settings.workPlaneMethod && settings.workPlaneMethod.optimizeType;
if (_section.isMultiAxis()) {
forward = _section.workPlane.forward;
} else if (!getSetting("workPlaneMethod.useTiltedWorkplane", false) && machineConfiguration.isMultiAxisConfiguration()) {
if (_optimizeType == undefined) {
var saveRotation = getRotation();
getWorkPlaneMachineABC(_section, true);
forward = getRotation().forward;
setRotation(saveRotation); // reset rotation
} else {
var abc = getWorkPlaneMachineABC(_section, false);
var forceAdjustment = settings.workPlaneMethod.optimizeType == OPTIMIZE_TABLES || settings.workPlaneMethod.optimizeType == OPTIMIZE_BOTH;
forward = machineConfiguration.getOptimizedDirection(_section.workPlane.forward, abc, false, forceAdjustment);
}
} else {
forward = getRotation().forward;
}
return forward;
}
function getRetractParameters() {
var _arguments = typeof arguments[0] === "object" ? arguments[0].axes : arguments;
var singleLine = arguments[0].singleLine == undefined ? true : arguments[0].singleLine;
var words = []; // store all retracted axes in an array
var retractAxes = new Array(false, false, false);
var method = getProperty("safePositionMethod", "undefined");
if (method == "clearanceHeight") {
if (!is3D()) {
error(localize("Safe retract option 'Clearance Height' is only supported when all operations are along the setup Z-axis."));
}
return undefined;
}
validate(settings.retract, "Setting 'retract' is required but not defined.");
validate(_arguments.length != 0, "No axis specified for getRetractParameters().");
for (i in _arguments) {
retractAxes[_arguments[i]] = true;
}
if ((retractAxes[0] || retractAxes[1]) && !state.retractedZ) { // retract Z first before moving to X/Y home
error(localize("Retracting in X/Y is not possible without being retracted in Z."));
return undefined;
}
// special conditions
if (retractAxes[0] || retractAxes[1]) {
method = getSetting("retract.methodXY", method);
}
if (retractAxes[2]) {
method = getSetting("retract.methodZ", method);
}
// define home positions
var useZeroValues = (settings.retract.useZeroValues && settings.retract.useZeroValues.indexOf(method) != -1);
var _xHome = machineConfiguration.hasHomePositionX() && !useZeroValues ? machineConfiguration.getHomePositionX() : toPreciseUnit(0, MM);
var _yHome = machineConfiguration.hasHomePositionY() && !useZeroValues ? machineConfiguration.getHomePositionY() : toPreciseUnit(0, MM);
var _zHome = machineConfiguration.getRetractPlane() != 0 && !useZeroValues ? machineConfiguration.getRetractPlane() : toPreciseUnit(0, MM);
for (var i = 0; i < _arguments.length; ++i) {
switch (_arguments[i]) {
case X:
if (!state.retractedX) {
words.push("X" + xyzFormat.format(_xHome));
xOutput.reset();
state.retractedX = true;
}
break;
case Y:
if (!state.retractedY) {
words.push("Y" + xyzFormat.format(_yHome));
yOutput.reset();
state.retractedY = true;
}
break;
case Z:
if (!state.retractedZ) {
words.push("Z" + xyzFormat.format(_zHome));
zOutput.reset();
state.retractedZ = true;
}
break;
default:
error(localize("Unsupported axis specified for getRetractParameters()."));
return undefined;
}
}
return {
method : method,
retractAxes: retractAxes,
words : words,
positions : {
x: retractAxes[0] ? _xHome : undefined,
y: retractAxes[1] ? _yHome : undefined,
z: retractAxes[2] ? _zHome : undefined},
singleLine: singleLine};
}
/** Returns true when subprogram logic does exist into the post. */
function subprogramsAreSupported() {
return typeof subprogramState != "undefined";
}
// Start of machine simulation connection move support
var TCPON = "TCP ON";
var TCPOFF = "TCP OFF";
var TWPON = "TWP ON";
var TWPOFF = "TWP OFF";
var TOOLCHANGE = "TOOL CHANGE";
var WORK = "WORK CS";
var MACHINE = "MACHINE CS";
var isTwpOn; // only used for debugging
var isTcpOn; // only used for debugging
if (typeof groupDefinitions != "object") {
groupDefinitions = {};
}
groupDefinitions.machineSimulation = {title:"Machine Simulation", collapsed:true, order:99};
properties.simulateConnectionMoves = {
title : "Simulate Connection Moves (Preview feature)",
description: "Specifies that connection moves like prepositioning, tool changes, retracts and other non-cutting moves should be shown in the machine simulation." + EOL +
"Note, this property does not affect the NC output, it only affects the machine simulation.",
group: "machineSimulation",
type : "boolean",
value: false,
scope: "machine"
};
/**
* Helper function for connection moves in machine simulation.
* @param {Object} parameters An object containing the desired options for machine simulation.
* @note Available properties are:
* @param {Number} x X axis position
* @param {Number} y Y axis position
* @param {Number} z Z axis position
* @param {Number} a A axis position (in radians)
* @param {Number} b B axis position (in radians)
* @param {Number} c C axis position (in radians)
* @param {Number} feed desired feedrate, automatically set to high/current feedrate if not specified
* @param {String} mode mode TCPON | TCPOFF | TWPON | TWPOFF | TOOLCHANGE
* @param {String} coordinates WORK | MACHINE - if undefined, work coordinates will be used by default
* @param {Number} eulerAngles the calculated Euler angles for the workplane
* @example
machineSimulation({a:abc.x, b:abc.y, c:abc.z, coordinates:MACHINE});
machineSimulation({x:toPreciseUnit(200, MM), y:toPreciseUnit(200, MM), coordinates:MACHINE, toolChange:true});
*/
var debugSimulation = false; // enable to output debug information for connection move support in the NC program
function machineSimulation(parameters) {
if (revision < 50075 || skipBlocks || !getProperty("simulateConnectionMoves")) {
return; // return when post kernel revision is lower than 50075 or when skipBlocks is enabled
}
var x = parameters.x;
var y = parameters.y;
var z = parameters.z;
var a = parameters.a;
var b = parameters.b;
var c = parameters.c;
var coordinates = parameters.coordinates;
var eulerAngles = parameters.eulerAngles;
var feed = parameters.feed;
if (feed === undefined && typeof gMotionModal !== "undefined") {
feed = gMotionModal.getCurrent() !== 0;
}
var mode = parameters.mode;
var performToolChange = mode == TOOLCHANGE;
if (mode !== undefined && ![TCPON, TCPOFF, TWPON, TWPOFF, TOOLCHANGE].includes(mode)) {
error(subst("Mode '%1' is not supported.", mode));
}
// mode takes precedence over active state
var enableTCP = mode != undefined ? mode == TCPON : typeof state !== "undefined" && state.tcpIsActive;
var enableTWP = mode != undefined ? mode == TWPON : typeof state !== "undefined" && state.twpIsActive;
var disableTCP = mode != undefined ? mode == TCPOFF : typeof state !== "undefined" && !state.tcpIsActive;
var disableTWP = mode != undefined ? mode == TWPOFF : typeof state !== "undefined" && !state.twpIsActive;
if (enableTCP) { // update TCP mode
simulation.setTWPModeOff();
simulation.setTCPModeOn();
isTcpOn = true;
} else if (disableTCP) {
simulation.setTCPModeOff();
isTcpOn = false;
}
if (enableTWP) { // update TWP mode
simulation.setTCPModeOff();
if (settings.workPlaneMethod.eulerConvention == undefined) {
simulation.setTWPModeAlignToCurrentPose();
} else if (eulerAngles) {
simulation.setTWPModeByEulerAngles(settings.workPlaneMethod.eulerConvention, eulerAngles.x, eulerAngles.y, eulerAngles.z);
}
isTwpOn = true;
} else if (disableTWP) {
simulation.setTWPModeOff();
isTwpOn = false;
}
if (debugSimulation) {
writeln(" DEBUG" + JSON.stringify(parameters));
writeln(" DEBUG" + JSON.stringify({isTwpOn:isTwpOn, isTcpOn:isTcpOn, feed:feed}));
}
if (x !== undefined || y !== undefined || z !== undefined || a !== undefined || b !== undefined || c !== undefined) {
if (x !== undefined) {simulation.setTargetX(x);}
if (y !== undefined) {simulation.setTargetY(y);}
if (z !== undefined) {simulation.setTargetZ(z);}
if (a !== undefined) {simulation.setTargetA(a);}
if (b !== undefined) {simulation.setTargetB(b);}
if (c !== undefined) {simulation.setTargetC(c);}
if (feed != undefined && feed) {
simulation.setMotionToLinear();
simulation.setFeedrate(typeof feed == "number" ? feed : feedOutput.getCurrent() == 0 ? highFeedrate : feedOutput.getCurrent());
} else {
simulation.setMotionToRapid();
}
if (coordinates != undefined && coordinates == MACHINE) {
simulation.moveToTargetInMachineCoords();
} else {
simulation.moveToTargetInWorkCoords();
}
}
if (performToolChange) {
simulation.performToolChangeCycle();
}
}
// <<<<< INCLUDED FROM include_files/commonFunctions.cpi
// >>>>> INCLUDED FROM include_files/defineWorkPlane.cpi
validate(settings.workPlaneMethod, "Setting 'workPlaneMethod' is required but not defined.");
function defineWorkPlane(_section, _setWorkPlane) {
var abc = new Vector(0, 0, 0);
if (settings.workPlaneMethod.forceMultiAxisIndexing || !is3D() || machineConfiguration.isMultiAxisConfiguration()) {
if (isPolarModeActive()) {
abc = getCurrentDirection();
} else if (_section.isMultiAxis()) {
forceWorkPlane();
cancelTransformation();
abc = _section.isOptimizedForMachine() ? _section.getInitialToolAxisABC() : _section.getGlobalInitialToolAxis();
} else if (settings.workPlaneMethod.useTiltedWorkplane && settings.workPlaneMethod.eulerConvention != undefined) {
if (settings.workPlaneMethod.eulerCalculationMethod == "machine" && machineConfiguration.isMultiAxisConfiguration()) {
abc = machineConfiguration.getOrientation(getWorkPlaneMachineABC(_section, true)).getEuler2(settings.workPlaneMethod.eulerConvention);
} else {
abc = _section.workPlane.getEuler2(settings.workPlaneMethod.eulerConvention);
}
} else {
abc = getWorkPlaneMachineABC(_section, true);
}
if (_setWorkPlane) {
if (_section.isMultiAxis() || isPolarModeActive()) { // 4-5x simultaneous operations
cancelWorkPlane();
if (_section.isOptimizedForMachine()) {
positionABC(abc, true);
} else {
setCurrentDirection(abc);
}
} else { // 3x and/or 3+2x operations
setWorkPlane(abc);
}
}
} else {
var remaining = _section.workPlane;
if (!isSameDirection(remaining.forward, new Vector(0, 0, 1))) {
error(localize("Tool orientation is not supported."));
return abc;
}
setRotation(remaining);
}
tcp.isSupportedByOperation = isTCPSupportedByOperation(_section);
return abc;
}
function isTCPSupportedByOperation(_section) {
var _tcp = _section.getOptimizedTCPMode() == OPTIMIZE_NONE;
if (!_section.isMultiAxis() && (settings.workPlaneMethod.useTiltedWorkplane ||
isSameDirection(machineConfiguration.getSpindleAxis(), getForwardDirection(_section)) ||
settings.workPlaneMethod.optimizeType == OPTIMIZE_HEADS ||
settings.workPlaneMethod.optimizeType == OPTIMIZE_TABLES ||
settings.workPlaneMethod.optimizeType == OPTIMIZE_BOTH)) {
_tcp = false;
}
return _tcp;
}
// <<<<< INCLUDED FROM include_files/defineWorkPlane.cpi
// >>>>> INCLUDED FROM include_files/getWorkPlaneMachineABC.cpi
validate(settings.machineAngles, "Setting 'machineAngles' is required but not defined.");
function getWorkPlaneMachineABC(_section, rotate) {
var currentABC = isFirstSection() ? new Vector(0, 0, 0) : getCurrentABC();
var abc = _section.getABCByPreference(machineConfiguration, _section.workPlane, currentABC, settings.machineAngles.controllingAxis, settings.machineAngles.type, settings.machineAngles.options);
if (!isSameDirection(machineConfiguration.getDirection(abc), _section.workPlane.forward)) {
error(localize("Orientation not supported."));
}
if (rotate) {
if (settings.workPlaneMethod.optimizeType == undefined || settings.workPlaneMethod.useTiltedWorkplane) { // legacy
var useTCP = false;
var R = machineConfiguration.getRemainingOrientation(abc, _section.workPlane);
setRotation(useTCP ? _section.workPlane : R);
} else {
if (!_section.isOptimizedForMachine()) {
machineConfiguration.setToolLength(compensateToolLength ? _section.getTool().overallLength : 0); // define the tool length for head adjustments
_section.optimize3DPositionsByMachine(machineConfiguration, abc, settings.workPlaneMethod.optimizeType);
}
}
}
return abc;
}
// <<<<< INCLUDED FROM include_files/getWorkPlaneMachineABC.cpi
// >>>>> INCLUDED FROM include_files/positionABC.cpi
function positionABC(abc, force) {
if (!machineConfiguration.isMultiAxisConfiguration()) {
error("Function 'positionABC' can only be used with multi-axis machine configurations.");
}
if (typeof unwindABC == "function") {
unwindABC(abc);
}
if (force) {
forceABC();
}
var a = aOutput.format(abc.x);
var b = bOutput.format(abc.y);
var c = cOutput.format(abc.z);
if (a || b || c) {
writeRetract(Z);
if (getSetting("retract.homeXY.onIndexing", false)) {
writeRetract(settings.retract.homeXY.onIndexing);
}
onCommand(COMMAND_UNLOCK_MULTI_AXIS);
gMotionModal.reset();
writeBlock(gMotionModal.format(0), a, b, c);
if (getCurrentSectionId() != -1) {
setCurrentABC(abc); // required for machine simulation
}
machineSimulation({a:abc.x, b:abc.y, c:abc.z, coordinates:MACHINE});
}
}
// <<<<< INCLUDED FROM include_files/positionABC.cpi
// >>>>> INCLUDED FROM include_files/writeWCS.cpi
function writeWCS(section, wcsIsRequired) {
if (section.workOffset != currentWorkOffset) {
if (getSetting("workPlaneMethod.cancelTiltFirst", false) && wcsIsRequired) {
cancelWorkPlane();
}
if (typeof forceWorkPlane == "function" && wcsIsRequired) {
forceWorkPlane();
}
writeStartBlocks(wcsIsRequired, function () {
writeBlock(section.wcs);
});
currentWorkOffset = section.workOffset;
}
}
// <<<<< INCLUDED FROM include_files/writeWCS.cpi
// >>>>> INCLUDED FROM include_files/writeToolCall.cpi
function writeToolCall(tool, insertToolCall) {
if (!isFirstSection()) {
writeStartBlocks(!getProperty("safeStartAllOperations") && insertToolCall, function () {
writeRetract(Z); // write optional Z retract before tool change if safeStartAllOperations is enabled
});
}
writeStartBlocks(insertToolCall, function () {
writeRetract(Z);
if (getSetting("retract.homeXY.onToolChange", false)) {
writeRetract(settings.retract.homeXY.onToolChange);
}
if (!isFirstSection() && insertToolCall) {
if (typeof forceWorkPlane == "function") {
forceWorkPlane();
}
onCommand(COMMAND_COOLANT_OFF); // turn off coolant on tool change
if (typeof disableLengthCompensation == "function") {
disableLengthCompensation(false);
}
}
if (tool.manualToolChange) {
onCommand(COMMAND_STOP);
writeComment("MANUAL TOOL CHANGE TO T" + toolFormat.format(tool.number));
} else {
if (!isFirstSection() && getProperty("optionalStop") && insertToolCall) {
onCommand(COMMAND_OPTIONAL_STOP);
}
onCommand(COMMAND_LOAD_TOOL);
}
});
if (typeof forceModals == "function" && (insertToolCall || getProperty("safeStartAllOperations"))) {
forceModals();
}
}
// <<<<< INCLUDED FROM include_files/writeToolCall.cpi
// >>>>> INCLUDED FROM include_files/startSpindle.cpi
function startSpindle(tool, insertToolCall) {
if (tool.type != TOOL_PROBE) {
var spindleSpeedIsRequired = insertToolCall || forceSpindleSpeed || isFirstSection() ||
rpmFormat.areDifferent(spindleSpeed, sOutput.getCurrent()) ||
(tool.clockwise != getPreviousSection().getTool().clockwise);
writeStartBlocks(spindleSpeedIsRequired, function () {
if (spindleSpeedIsRequired || operationNeedsSafeStart) {
onCommand(COMMAND_START_SPINDLE);
}
});
}
}
// <<<<< INCLUDED FROM include_files/startSpindle.cpi
// >>>>> INCLUDED FROM include_files/coolant.cpi
var currentCoolantMode = COOLANT_OFF;
var coolantOff = undefined;
var isOptionalCoolant = false;
var forceCoolant = false;
function setCoolant(coolant) {
var coolantCodes = getCoolantCodes(coolant);
if (Array.isArray(coolantCodes)) {
writeStartBlocks(!isOptionalCoolant, function () {
if (settings.coolant.singleLineCoolant) {
writeBlock(coolantCodes.join(getWordSeparator()));
} else {
for (var c in coolantCodes) {
writeBlock(coolantCodes[c]);
}
}
});
return undefined;
}
return coolantCodes;
}
function getCoolantCodes(coolant, format) {
if (!getProperty("useCoolant", true)) {
return undefined; // coolant output is disabled by property if it exists
}
isOptionalCoolant = false;
if (typeof operationNeedsSafeStart == "undefined") {
operationNeedsSafeStart = false;
}
var multipleCoolantBlocks = new Array(); // create a formatted array to be passed into the outputted line
var coolants = settings.coolant.coolants;
if (!coolants) {
error(localize("Coolants have not been defined."));
}
if (tool.type && tool.type == TOOL_PROBE) { // avoid coolant output for probing
coolant = COOLANT_OFF;
}
if (coolant == currentCoolantMode) {
if (operationNeedsSafeStart && coolant != COOLANT_OFF) {
isOptionalCoolant = true;
} else if (!forceCoolant || coolant == COOLANT_OFF) {
return undefined; // coolant is already active
}
}
if ((coolant != COOLANT_OFF) && (currentCoolantMode != COOLANT_OFF) && (coolantOff != undefined) && !forceCoolant && !isOptionalCoolant) {
if (Array.isArray(coolantOff)) {
for (var i in coolantOff) {
multipleCoolantBlocks.push(coolantOff[i]);
}
} else {
multipleCoolantBlocks.push(coolantOff);
}
}
forceCoolant = false;
var m;
var coolantCodes = {};
for (var c in coolants) { // find required coolant codes into the coolants array
if (coolants[c].id == coolant) {
coolantCodes.on = coolants[c].on;
if (coolants[c].off != undefined) {
coolantCodes.off = coolants[c].off;
break;
} else {
for (var i in coolants) {
if (coolants[i].id == COOLANT_OFF) {
coolantCodes.off = coolants[i].off;
break;
}
}
}
}
}
if (coolant == COOLANT_OFF) {
m = !coolantOff ? coolantCodes.off : coolantOff; // use the default coolant off command when an 'off' value is not specified
} else {
coolantOff = coolantCodes.off;
m = coolantCodes.on;
}
if (!m) {
onUnsupportedCoolant(coolant);
m = 9;
} else {
if (Array.isArray(m)) {
for (var i in m) {
multipleCoolantBlocks.push(m[i]);
}
} else {
multipleCoolantBlocks.push(m);
}
currentCoolantMode = coolant;
for (var i in multipleCoolantBlocks) {
if (typeof multipleCoolantBlocks[i] == "number") {
multipleCoolantBlocks[i] = mFormat.format(multipleCoolantBlocks[i]);
}
}
if (format == undefined || format) {
return multipleCoolantBlocks; // return the single formatted coolant value
} else {
return m; // return unformatted coolant value
}
}
return undefined;
}
// <<<<< INCLUDED FROM include_files/coolant.cpi
// >>>>> INCLUDED FROM include_files/writeProgramHeader.cpi
properties.writeMachine = {
title : "Write machine",
description: "Output the machine settings in the header of the program.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
};
properties.writeTools = {
title : "Write tool list",
description: "Output a tool list in the header of the program.",
group : "formats",
type : "boolean",
value : true,
scope : "post"
};
function writeProgramHeader() {
// dump machine configuration
var vendor = machineConfiguration.getVendor();
var model = machineConfiguration.getModel();
var mDescription = machineConfiguration.getDescription();
if (getProperty("writeMachine") && (vendor || model || mDescription)) {
writeComment(localize("Machine"));
if (vendor) {
writeComment(" " + localize("vendor") + ": " + vendor);
}
if (model) {
writeComment(" " + localize("model") + ": " + model);
}
if (mDescription) {
writeComment(" " + localize("description") + ": " + mDescription);
}
}
// dump tool information
if (getProperty("writeTools")) {
if (false) { // set to true to use the post kernel version of the tool list
writeToolTable(TOOL_NUMBER_COL);
} else {
var zRanges = {};
if (is3D()) {
var numberOfSections = getNumberOfSections();
for (var i = 0; i < numberOfSections; ++i) {
var section = getSection(i);
var zRange = section.getGlobalZRange();
var tool = section.getTool();
if (zRanges[tool.number]) {
zRanges[tool.number].expandToRange(zRange);
} else {
zRanges[tool.number] = zRange;
}
}
}
var tools = getToolTable();
if (tools.getNumberOfTools() > 0) {
for (var i = 0; i < tools.getNumberOfTools(); ++i) {
var tool = tools.getTool(i);
var comment = (getProperty("toolAsName") ? "\"" + tool.description.toUpperCase() + "\"" : "T" + toolFormat.format(tool.number)) + " " +
"D=" + xyzFormat.format(tool.diameter) + " " +
localize("CR") + "=" + xyzFormat.format(tool.cornerRadius);
if ((tool.taperAngle > 0) && (tool.taperAngle < Math.PI)) {
comment += " " + localize("TAPER") + "=" + taperFormat.format(tool.taperAngle) + localize("deg");
}
if (zRanges[tool.number]) {
comment += " - " + localize("ZMIN") + "=" + xyzFormat.format(zRanges[tool.number].getMinimum());
}
comment += " - " + getToolTypeName(tool.type);
writeComment(comment);
}
}
}
}
}
// <<<<< INCLUDED FROM include_files/writeProgramHeader.cpi
// >>>>> INCLUDED FROM include_files/onRapid_fanuc.cpi
function onRapid(_x, _y, _z) {
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
if (x || y || z) {
if (pendingRadiusCompensation >= 0) {
error(localize("Radius compensation mode cannot be changed at rapid traversal."));
return;
}
writeBlock(gMotionModal.format(0), x, y, z);
forceFeed();
}
}
// <<<<< INCLUDED FROM include_files/onRapid_fanuc.cpi
// >>>>> INCLUDED FROM include_files/onLinear_fanuc.cpi
function onLinear(_x, _y, _z, feed) {
if (pendingRadiusCompensation >= 0) {
xOutput.reset();
yOutput.reset();
}
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
var f = getFeed(feed);
if (x || y || z) {
if (pendingRadiusCompensation >= 0) {
pendingRadiusCompensation = -1;
var d = getSetting("outputToolDiameterOffset", true) ? diameterOffsetFormat.format(tool.diameterOffset) : "";
writeBlock(gPlaneModal.format(17));
switch (radiusCompensation) {
case RADIUS_COMPENSATION_LEFT:
writeBlock(gMotionModal.format(1), gFormat.format(41), x, y, z, d, f);
break;
case RADIUS_COMPENSATION_RIGHT:
writeBlock(gMotionModal.format(1), gFormat.format(42), x, y, z, d, f);
break;
default:
writeBlock(gMotionModal.format(1), gFormat.format(40), x, y, z, f);
}
} else {
writeBlock(gMotionModal.format(1), x, y, z, f);
}
} else if (f) {
if (getNextRecord().isMotion()) { // try not to output feed without motion
forceFeed(); // force feed on next line
} else {
writeBlock(gMotionModal.format(1), f);
}
}
}
// <<<<< INCLUDED FROM include_files/onLinear_fanuc.cpi
// >>>>> INCLUDED FROM include_files/onRapid5D_fanuc.cpi
function onRapid5D(_x, _y, _z, _a, _b, _c) {
if (pendingRadiusCompensation >= 0) {
error(localize("Radius compensation mode cannot be changed at rapid traversal."));
return;
}
if (!currentSection.isOptimizedForMachine()) {
forceXYZ();
}
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
var a = currentSection.isOptimizedForMachine() ? aOutput.format(_a) : toolVectorOutputI.format(_a);
var b = currentSection.isOptimizedForMachine() ? bOutput.format(_b) : toolVectorOutputJ.format(_b);
var c = currentSection.isOptimizedForMachine() ? cOutput.format(_c) : toolVectorOutputK.format(_c);
if (x || y || z || a || b || c) {
writeBlock(gMotionModal.format(0), x, y, z, a, b, c);
forceFeed();
}
}
// <<<<< INCLUDED FROM include_files/onRapid5D_fanuc.cpi
// >>>>> INCLUDED FROM include_files/onLinear5D_fanuc.cpi
function onLinear5D(_x, _y, _z, _a, _b, _c, feed, feedMode) {
if (pendingRadiusCompensation >= 0) {
error(localize("Radius compensation cannot be activated/deactivated for 5-axis move."));
return;
}
if (!currentSection.isOptimizedForMachine()) {
forceXYZ();
}
var x = xOutput.format(_x);
var y = yOutput.format(_y);
var z = zOutput.format(_z);
var a = currentSection.isOptimizedForMachine() ? aOutput.format(_a) : toolVectorOutputI.format(_a);
var b = currentSection.isOptimizedForMachine() ? bOutput.format(_b) : toolVectorOutputJ.format(_b);
var c = currentSection.isOptimizedForMachine() ? cOutput.format(_c) : toolVectorOutputK.format(_c);
if (feedMode == FEED_INVERSE_TIME) {
forceFeed();
}
var f = feedMode == FEED_INVERSE_TIME ? inverseTimeOutput.format(feed) : getFeed(feed);
var fMode = feedMode == FEED_INVERSE_TIME ? 93 : getProperty("useG95") ? 95 : 94;
if (x || y || z || a || b || c) {
writeBlock(gFeedModeModal.format(fMode), gMotionModal.format(1), x, y, z, a, b, c, f);
} else if (f) {
if (getNextRecord().isMotion()) { // try not to output feed without motion
forceFeed(); // force feed on next line
} else {
writeBlock(gFeedModeModal.format(fMode), gMotionModal.format(1), f);
}
}
}
// <<<<< INCLUDED FROM include_files/onLinear5D_fanuc.cpi
// >>>>> INCLUDED FROM include_files/onCircular_fanuc.cpi
function onCircular(clockwise, cx, cy, cz, x, y, z, feed) {
if (pendingRadiusCompensation >= 0) {
error(localize("Radius compensation cannot be activated/deactivated for a circular move."));
return;
}
var start = getCurrentPosition();
if (isFullCircle()) {
if (getProperty("useRadius") || isHelical()) { // radius mode does not support full arcs
linearize(tolerance);
return;
}
switch (getCircularPlane()) {
case PLANE_XY:
writeBlock(gPlaneModal.format(17), gMotionModal.format(clockwise ? 2 : 3), iOutput.format(cx - start.x), jOutput.format(cy - start.y), getFeed(feed));
break;
case PLANE_ZX:
writeBlock(gPlaneModal.format(18), gMotionModal.format(clockwise ? 2 : 3), iOutput.format(cx - start.x), kOutput.format(cz - start.z), getFeed(feed));
break;
case PLANE_YZ:
writeBlock(gPlaneModal.format(19), gMotionModal.format(clockwise ? 2 : 3), jOutput.format(cy - start.y), kOutput.format(cz - start.z), getFeed(feed));
break;
default:
linearize(tolerance);
}
} else if (!getProperty("useRadius")) {
switch (getCircularPlane()) {
case PLANE_XY:
writeBlock(gPlaneModal.format(17), gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), iOutput.format(cx - start.x), jOutput.format(cy - start.y), getFeed(feed));
break;
case PLANE_ZX:
writeBlock(gPlaneModal.format(18), gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), iOutput.format(cx - start.x), kOutput.format(cz - start.z), getFeed(feed));
break;
case PLANE_YZ:
writeBlock(gPlaneModal.format(19), gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), jOutput.format(cy - start.y), kOutput.format(cz - start.z), getFeed(feed));
break;
default:
if (getProperty("allow3DArcs")) {
// make sure maximumCircularSweep is well below 360deg
// we could use G02.4 or G03.4 - direction is calculated
var ip = getPositionU(0.5);
writeBlock(gMotionModal.format(clockwise ? 2.4 : 3.4), xOutput.format(ip.x), yOutput.format(ip.y), zOutput.format(ip.z), getFeed(feed));
writeBlock(xOutput.format(x), yOutput.format(y), zOutput.format(z));
} else {
linearize(tolerance);
}
}
} else { // use radius mode
var r = getCircularRadius();
if (toDeg(getCircularSweep()) > (180 + 1e-9)) {
r = -r; // allow up to <360 deg arcs
}
switch (getCircularPlane()) {
case PLANE_XY:
writeBlock(gPlaneModal.format(17), gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), "R" + rFormat.format(r), getFeed(feed));
break;
case PLANE_ZX:
writeBlock(gPlaneModal.format(18), gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), "R" + rFormat.format(r), getFeed(feed));
break;
case PLANE_YZ:
writeBlock(gPlaneModal.format(19), gMotionModal.format(clockwise ? 2 : 3), xOutput.format(x), yOutput.format(y), zOutput.format(z), "R" + rFormat.format(r), getFeed(feed));
break;
default:
if (getProperty("allow3DArcs")) {
// make sure maximumCircularSweep is well below 360deg
// we could use G02.4 or G03.4 - direction is calculated
var ip = getPositionU(0.5);
writeBlock(gMotionModal.format(clockwise ? 2.4 : 3.4), xOutput.format(ip.x), yOutput.format(ip.y), zOutput.format(ip.z), getFeed(feed));
writeBlock(xOutput.format(x), yOutput.format(y), zOutput.format(z));
} else {
linearize(tolerance);
}
}
}
}
// <<<<< INCLUDED FROM include_files/onCircular_fanuc.cpi
// >>>>> INCLUDED FROM include_files/workPlaneFunctions_fanuc.cpi
var gRotationModal = createOutputVariable({current : 69,
onchange: function () {
state.twpIsActive = gRotationModal.getCurrent() != 69;
if (typeof probeVariables != "undefined") {
probeVariables.outputRotationCodes = probeVariables.probeAngleMethod == "G68";
}
}}, gFormat);
var currentWorkPlaneABC = undefined;
function forceWorkPlane() {
currentWorkPlaneABC = undefined;
}
function cancelWCSRotation() {
if (typeof gRotationModal != "undefined" && gRotationModal.getCurrent() == 68) {
cancelWorkPlane(true);
}
}
function cancelWorkPlane(force) {
if (typeof gRotationModal != "undefined") {
if (force) {
gRotationModal.reset();
}
var command = gRotationModal.format(69);
if (command) {
writeBlock(command); // cancel frame
forceWorkPlane();
}
}
}
function setWorkPlane(abc) {
if (!settings.workPlaneMethod.forceMultiAxisIndexing && is3D() && !machineConfiguration.isMultiAxisConfiguration()) {
return; // ignore
}
var workplaneIsRequired = (currentWorkPlaneABC == undefined) ||
abcFormat.areDifferent(abc.x, currentWorkPlaneABC.x) ||
abcFormat.areDifferent(abc.y, currentWorkPlaneABC.y) ||
abcFormat.areDifferent(abc.z, currentWorkPlaneABC.z);
writeStartBlocks(workplaneIsRequired, function () {
writeRetract(Z);
if (getSetting("retract.homeXY.onIndexing", false)) {
writeRetract(settings.retract.homeXY.onIndexing);
}
if (currentSection.getId() > 0 && (isTCPSupportedByOperation(getSection(currentSection.getId() - 1) || tcp.isSupportedByOperation)) && typeof disableLengthCompensation == "function") {
disableLengthCompensation(); // cancel TCP
}
if (settings.workPlaneMethod.useTiltedWorkplane) {
onCommand(COMMAND_UNLOCK_MULTI_AXIS);
cancelWorkPlane();
if (machineConfiguration.isMultiAxisConfiguration()) {
var machineABC = abc.isNonZero() ? (currentSection.isMultiAxis() ? getCurrentDirection() : getWorkPlaneMachineABC(currentSection, false)) : abc;
if (settings.workPlaneMethod.useABCPrepositioning || machineABC.isZero()) {
positionABC(machineABC, false);
} else {
setCurrentABC(machineABC);
}
}
if (abc.isNonZero() || !machineConfiguration.isMultiAxisConfiguration()) {
gRotationModal.reset();
writeBlock(
gRotationModal.format(68.2), "X" + xyzFormat.format(currentSection.workOrigin.x), "Y" + xyzFormat.format(currentSection.workOrigin.y), "Z" + xyzFormat.format(currentSection.workOrigin.z),
"I" + abcFormat.format(abc.x), "J" + abcFormat.format(abc.y), "K" + abcFormat.format(abc.z)
); // set frame
writeBlock(gFormat.format(53.1)); // turn machine
machineSimulation({a:getCurrentABC().x, b:getCurrentABC().y, c:getCurrentABC().z, coordinates:MACHINE, eulerAngles:abc});
}
} else {
positionABC(abc, true);
}
if (!currentSection.isMultiAxis()) {
onCommand(COMMAND_LOCK_MULTI_AXIS);
}
currentWorkPlaneABC = abc;
});
}
// <<<<< INCLUDED FROM include_files/workPlaneFunctions_fanuc.cpi
// >>>>> INCLUDED FROM include_files/writeRetract_fanuc.cpi
function writeRetract() {
var retract = getRetractParameters.apply(this, arguments);
if (retract && retract.words.length > 0) {
if (typeof cancelWCSRotation == "function" && getSetting("retract.cancelRotationOnRetracting", false)) { // cancel rotation before retracting
cancelWCSRotation();
}
if (typeof disableLengthCompensation == "function" && getSetting("allowCancelTCPBeforeRetracting", false) && state.tcpIsActive) {
disableLengthCompensation(); // cancel TCP before retracting
}
for (var i in retract.words) {
var words = retract.singleLine ? retract.words : retract.words[i];
switch (retract.method) {
case "G28":
forceModals(gMotionModal, gAbsIncModal);
writeBlock(gFormat.format(28), gAbsIncModal.format(91), words);
writeBlock(gAbsIncModal.format(90));
break;
case "G30":
forceModals(gMotionModal, gAbsIncModal);
writeBlock(gFormat.format(30), gAbsIncModal.format(91), words);
writeBlock(gAbsIncModal.format(90));
break;
case "G53":
forceModals(gMotionModal);
writeBlock(gAbsIncModal.format(90), gFormat.format(53), gMotionModal.format(0), words);
break;
default:
if (typeof writeRetractCustom == "function") {
writeRetractCustom(retract);
} else {
error(subst(localize("Unsupported safe position method '%1'"), retract.method));
return;
}
}
machineSimulation({
x : retract.singleLine || words.indexOf("X") != -1 ? retract.positions.x : undefined,
y : retract.singleLine || words.indexOf("Y") != -1 ? retract.positions.y : undefined,
z : retract.singleLine || words.indexOf("Z") != -1 ? retract.positions.z : undefined,
coordinates: MACHINE
});
if (retract.singleLine) {
break;
}
}
}
}
// <<<<< INCLUDED FROM include_files/writeRetract_fanuc.cpi
// >>>>> INCLUDED FROM include_files/initialPositioning_fanuc.cpi
/**
* Writes the initial positioning procedure for a section to get to the start position of the toolpath.
* @param {Vector} position The initial position to move to
* @param {boolean} isRequired true: Output full positioning, false: Output full positioning in optional state or output simple positioning only
* @param {String} codes1 Allows to add additional code to the first positioning line
* @param {String} codes2 Allows to add additional code to the second positioning line (if applicable)
* @example
var myVar1 = formatWords("T" + tool.number, currentSection.wcs);
var myVar2 = getCoolantCodes(tool.coolant);
writeInitialPositioning(initialPosition, isRequired, myVar1, myVar2);
*/
function writeInitialPositioning(position, isRequired, codes1, codes2) {
var motionCode = {single:0, multi:0};
switch (highFeedMapping) {
case HIGH_FEED_MAP_ANY:
motionCode = {single:1, multi:1}; // map all rapid traversals to high feed
break;
case HIGH_FEED_MAP_MULTI:
motionCode = {single:0, multi:1}; // map rapid traversal along more than one axis to high feed
break;
}
var feed = (highFeedMapping != HIGH_FEED_NO_MAPPING) ? getFeed(highFeedrate) : "";
var hOffset = getSetting("outputToolLengthOffset", true) ? hFormat.format(tool.lengthOffset) : "";
var additionalCodes = [formatWords(codes1), formatWords(codes2)];
forceModals(gMotionModal);
writeStartBlocks(isRequired, function() {
var modalCodes = formatWords(gAbsIncModal.format(90), gPlaneModal.format(17));
if (typeof disableLengthCompensation == "function") {
disableLengthCompensation(!isRequired); // cancel tool length compensation prior to enabling it, required when switching G43/G43.4 modes
}
// multi axis prepositioning with TWP
if (currentSection.isMultiAxis() && getSetting("workPlaneMethod.prepositionWithTWP", true) && getSetting("workPlaneMethod.useTiltedWorkplane", false) &&
tcp.isSupportedByOperation && getCurrentDirection().isNonZero()) {
var W = machineConfiguration.isMultiAxisConfiguration() ? machineConfiguration.getOrientation(getCurrentDirection()) :
Matrix.getOrientationFromDirection(getCurrentDirection());
var prePosition = W.getTransposed().multiply(position);
var angles = W.getEuler2(settings.workPlaneMethod.eulerConvention);
setWorkPlane(angles);
writeBlock(modalCodes, gMotionModal.format(motionCode.multi), xOutput.format(prePosition.x), yOutput.format(prePosition.y), feed, additionalCodes[0]);
machineSimulation({x:prePosition.x, y:prePosition.y});
cancelWorkPlane();
writeBlock(getOffsetCode(), hOffset, additionalCodes[1]); // omit Z-axis output is desired
forceAny(); // required to output XYZ coordinates in the following line
} else {
if (machineConfiguration.isHeadConfiguration()) {
writeBlock(modalCodes, gMotionModal.format(motionCode.multi), getOffsetCode(),
xOutput.format(position.x), yOutput.format(position.y), zOutput.format(position.z),
hOffset, feed, additionalCodes
);
machineSimulation({x:position.x, y:position.y, z:position.z});
} else {
writeBlock(modalCodes, gMotionModal.format(motionCode.multi), xOutput.format(position.x), yOutput.format(position.y), feed, additionalCodes[0]);
machineSimulation({x:position.x, y:position.y});
writeBlock(gMotionModal.format(motionCode.single), getOffsetCode(), zOutput.format(position.z), hOffset, additionalCodes[1]);
machineSimulation(tcp.isSupportedByOperation ? {x:position.x, y:position.y, z:position.z} : {z:position.z});
}
}
forceModals(gMotionModal);
if (isRequired) {
additionalCodes = []; // clear additionalCodes buffer
}
});
validate(!validateLengthCompensation || state.lengthCompensationActive, "Tool length compensation is not active."); // make sure that lenght compensation is enabled
if (!isRequired) { // simple positioning
var modalCodes = formatWords(gAbsIncModal.format(90), gPlaneModal.format(17));
if (!state.retractedZ && xyzFormat.getResultingValue(getCurrentPosition().z) < xyzFormat.getResultingValue(position.z)) {
writeBlock(modalCodes, gMotionModal.format(motionCode.single), zOutput.format(position.z), feed);
machineSimulation({z:position.z});
}
forceXYZ();
writeBlock(modalCodes, gMotionModal.format(motionCode.multi), xOutput.format(position.x), yOutput.format(position.y), feed, additionalCodes);
machineSimulation({x:position.x, y:position.y});
}
}
Matrix.getOrientationFromDirection = function (ijk) {
var forward = ijk;
var unitZ = new Vector(0, 0, 1);
var W;
if (Math.abs(Vector.dot(forward, unitZ)) < 0.5) {
var imX = Vector.cross(forward, unitZ).getNormalized();
W = new Matrix(imX, Vector.cross(forward, imX), forward);
} else {
var imX = Vector.cross(new Vector(0, 1, 0), forward).getNormalized();
W = new Matrix(imX, Vector.cross(forward, imX), forward);
}
return W;
};
// <<<<< INCLUDED FROM include_files/initialPositioning_fanuc.cpi
// >>>>> INCLUDED FROM include_files/getOffsetCode_fanuc.cpi
var toolLengthCompOutput = createOutputVariable({control : CONTROL_FORCE,
onchange: function() {
state.tcpIsActive = toolLengthCompOutput.getCurrent() == 43.4 || toolLengthCompOutput.getCurrent() == 43.5;
state.lengthCompensationActive = toolLengthCompOutput.getCurrent() != 49;
}
}, gFormat);
function getOffsetCode() {
if (!getSetting("outputToolLengthCompensation", true) && toolLengthCompOutput.isEnabled()) {
state.lengthCompensationActive = true; // always assume that length compensation is active
toolLengthCompOutput.disable();
}
var offsetCode = 43;
if (tcp.isSupportedByOperation) {
offsetCode = machineConfiguration.isMultiAxisConfiguration() ? 43.4 : 43.5;
}
return toolLengthCompOutput.format(offsetCode);
}
// <<<<< INCLUDED FROM include_files/getOffsetCode_fanuc.cpi
// <<<<< INCLUDED FROM ../common/buildbotics mill.cps
properties.useM06.value = false; // output M06 with tool changes
properties.useCircularInterpolation.value = false; // output circular moves as linear moves when set to false