New in this version

• Added option to open the Online Post Library from the post dialog menu.
• Added short description, vendor, and long description for the post selection tool tip. The long description is now also shown for the properties.
• Added Turkish translation.
• Prevent out of memory issue when using Simulate by hard limiting toolpath expanded for drilling cycles. Simulate will fail rather than using up all memory. #4408
• Renamed "Morphing" to "Morph" and "Projection" to "Project" for consistency with other strategies.
• On model change, operation generation should be aborted. #3225
• Fix for Simulating or posting when selecting root / document node causes pattern source to be repeated #4437
• Fixed issue where Scallop could fail to generate when using a tapered tool. #4381
• Fix operations that did not get aborted when changing the Setup. #3225
• Fixed potential crash when simulating milling toolpath in Stock Simulation. #4386
• Ramp height in 2D Adaptive incorrectly calculated when 'stock to leave' is used. #1681
• Fixed "keep original" parameter in nested patterns. #4242
• Fixed missing highlighting when high feed or no-engagement moves cause collisions in Simulate. #4362
• Fixed deleting a pattern object leaves visual tool path. #4095
• Fixed wrong stock simulation issue when using dual spindle turning. #3620
• Fixed potential crash when using Spun Profile for mill/turn parts.
• Fix crash in Inventor when select pattern with suppress operations. #4195
• Fixed problem with the single groove operation that did not work for ID. #4151

Changes to toolpath generation

• Improved progress support for Adaptive Clearing. #3215
• Improved stay down linking for Contour.
• Fixed wrong toolpath issue for Slot. #1505
• Fixed potential gouge when ramping for Contour. #3523
• Fixed potential linking gouge when using tapered tool. #3522
• Fixed gouge on the rotary axis for ID profile turning. #3803
• Fixed a rare gouge when using smooth transition linking. #3944
• Fixed potential shaft or holder collision for Contour. #3893
• Fixed potential generation failure for Adaptive Clearing. #3450
• Fixed an issue where linking moves for 3D strategies in very rare cases could gouge the part with less than 2 times the tolerance. #4074
• Fixed potential generation failure when doing undercut milling for Contour. #4189
• Fixed wrong retract motion issue for Turning when moving to home position. #4127
• Fixed wrong toolpath issue when minimum cutting radius for 2D Contour for 180 degree arcs. #4191
• Fixed wrong retract motion for Adaptive Clearing. #4253
• Fixed wrong linking issue for 2D Chamfer. #3671
• Fixed an issue where in very rare cases a wrong arc could be output for toolpath generation. #4002

Changes to post processor

• Added support for multi-axis simultaneous toolpath for generic Heidenhain 407 post.
• Improved coolant handling for generic Haas milling posts.
• Added support for dust collector for generic CNC Router Parts post.
• Fixed repositionToCycleClearance() which could reposition to undesired position. This would in general happen more likely for inch mode rather than for metric mode. #4213
• Fixed failure for generic Multicam HPGL post.
• Added C9 macro call at tool change for generic Shopbot posts.
• Fixed multi-axis support for generic Shopbot posts.
• Fixed order of M3/M4 and S-word for the generic TinyG post.