New in this version

• Added 3D Morph strategy.
• Added WCS Probe strategy.
• Added support for optional toolpath for Haas UMC-750 post.
• Notes can now be saved and retrived as part of operation template. #3509
• Support Inventor 2017. #3437
• Added alternate flanking feature for turning threading. This feature will give more even utilization of both sides of the thread insert for longer tool life.
• Updated UI translations.
• Expand "Ramp" group by default. #3644
• Turning: Show model profile outline.
• The "Minimum cutting radius" parameter box is now located higher up in the the Command Page. #3326
• The Tool Library now preserves the expansion state for folders. #3305
• Fixed occasional crash during chaining. #3664
• Fix toolpath preview after release the Pattern browser node. #3656
• Fixed wrong Chamfer Mill Tool profile. #3490
• Fixed issue with "Select same diameter" for conical holes on opposite sides of the model. #3449
• Fix pattern previewing only first operation in the folder. Also fix nested pattern previewing. #1812
• Fixed potential error when editing an operation with sketch selection. #3387
• Fixed potential wrong validation error for derived operations. #2264
• Fixed issue where an operation could be edited even when it was marked as 'protected'. #2698
• Mills with Taper Angle can now be used with the "To Chamfer Width" and "To Chamfer Diameter" height modes in Drilling. #3320
• Fixed issue with the High Feed Mapping dropdown list not updating in the Post Processing dialog. #3172

Changes to toolpath generation

• Improved toolpath generation time for leads in Adaptive Clearing. This improvement can reduce the generation significantly when the toolpath has a lot of lead moves. #3538
• Fixed generation failure for Adaptive Clearing. #3325
• Fixed wrong toolpath issue for turning Grooving. #2586
• Fixed potential hang issue for Adaptive Clearing. #3367
• Changed the behavior of the retract to home position to keep the tool away from the rotary axis when doing ID turning. #2393
• Fixed generating failure for Adaptive Clearing. #3445
• Fixed lead issue for Adaptive Clearing. #3501
• Fixed very tiny gouges that could happened for Spiral. #3512
• Fixed potential toolpath generation failure. #3560
• Fixed long retract along Z-axis for turning when moving to home position. #3391
• Fixed too long retract to the home position for turning ID grooving. #3335

Changes to post processor

• Added program name in title for Epilog Laser post.
• Added forceIJK property for force output of IJK for G2/G3 when not using R word for generic Fanuc post.
• Added option to turn off G28 for generic Denford post.
• Updated generic Haas UMC-750 post to do fast C-axis unwind.
• Changed description for Tormach milling post to include PathPilot.
• Fixed incremental pecking depth for Heidenhain turning.
• Fixed machine retracts for generic Okuma post.
• Fixed circular output and scaling for generic ISEL post.
• Fixed flipped orientation of SVG post.
• Fixed flipped orientation of SVG output for Epilog Laser post.
• Fixed incremental pecking depth for FANUC turning.